Re: [PATCH v2 11/11] media: max9286: Use frame interval from subdev state

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Laurent

On Thu, May 09, 2024 at 03:51:22PM GMT, Laurent Pinchart wrote:
> Hi Jacopo,
>
> Thank you for the patch.
>
> On Mon, May 06, 2024 at 06:49:39PM +0200, Jacopo Mondi wrote:
> > Use the frame interval stored in the subdev state instead of storing
> > a copy in the driver private structure.
> >
> > Initialize the frame interval to the special case 0/0 that in the
> > max9286 driver represents automatic handling of frame sync.
> >
> > During the startup phase, configure register 0x01 to use automatic
> > frame sync, to match the subdev state initialiation, instead of calling
> > max9286_set_fsync_period() which now requires a 'state' argument.
>
> Given that max9286_set_fsync_period() will be called at stream start
> time, is there a need to set the register in max9286_setup() ? If so,
>
> Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
>
> If not, you can drop it.
>

Ok, I removed it initially then re-introduced in v2

> > Signed-off-by: Jacopo Mondi <jacopo.mondi@xxxxxxxxxxxxxxxx>
> > ---
> >  drivers/media/i2c/max9286.c | 59 +++++++++++++++++++------------------
> >  1 file changed, 31 insertions(+), 28 deletions(-)
> >
> > diff --git a/drivers/media/i2c/max9286.c b/drivers/media/i2c/max9286.c
> > index 7fad190cd9b3..6930a98c8965 100644
> > --- a/drivers/media/i2c/max9286.c
> > +++ b/drivers/media/i2c/max9286.c
> > @@ -197,8 +197,6 @@ struct max9286_priv {
> >  	struct v4l2_ctrl *pixelrate_ctrl;
> >  	unsigned int pixelrate;
> >
> > -	struct v4l2_fract interval;
> > -
> >  	unsigned int nsources;
> >  	unsigned int source_mask;
> >  	unsigned int route_mask;
> > @@ -571,11 +569,14 @@ static void max9286_set_video_format(struct max9286_priv *priv,
> >  		      MAX9286_INVVS | MAX9286_HVSRC_D14);
> >  }
> >
> > -static void max9286_set_fsync_period(struct max9286_priv *priv)
> > +static void max9286_set_fsync_period(struct max9286_priv *priv,
> > +				     struct v4l2_subdev_state *state)
>
> Depending on whether this series or "media: v4l2-subdev: Provide
> const-aware subdev state accessors" gets merged first, this argument
> could be const :-) No need to address that for now and add a dependency.
>
> >  {
> > +	const struct v4l2_fract *interval;
> >  	u32 fsync;
> >
> > -	if (!priv->interval.numerator || !priv->interval.denominator) {
> > +	interval = v4l2_subdev_state_get_interval(state, MAX9286_SRC_PAD);
> > +	if (!interval->numerator || !interval->denominator) {
> >  		/*
> >  		 * Special case, a null interval enables automatic FRAMESYNC
> >  		 * mode. FRAMESYNC is taken from the slowest link.
> > @@ -591,8 +592,8 @@ static void max9286_set_fsync_period(struct max9286_priv *priv)
> >  	 * The FRAMESYNC generator is configured with a period expressed as a
> >  	 * number of PCLK periods.
> >  	 */
> > -	fsync = div_u64((u64)priv->pixelrate * priv->interval.numerator,
> > -			priv->interval.denominator);
> > +	fsync = div_u64((u64)priv->pixelrate * interval->numerator,
> > +			interval->denominator);
> >
> >  	dev_dbg(&priv->client->dev, "fsync period %u (pclk %u)\n", fsync,
> >  		priv->pixelrate);
> > @@ -801,7 +802,7 @@ static int max9286_s_stream(struct v4l2_subdev *sd, int enable)
> >  		format = v4l2_subdev_state_get_format(state, MAX9286_SRC_PAD);
> >
> >  		max9286_set_video_format(priv, format);
> > -		max9286_set_fsync_period(priv);
> > +		max9286_set_fsync_period(priv, state);
> >
> >  		/*
> >  		 * The frame sync between cameras is transmitted across the
> > @@ -874,19 +875,11 @@ static int max9286_get_frame_interval(struct v4l2_subdev *sd,
> >  				      struct v4l2_subdev_state *sd_state,
> >  				      struct v4l2_subdev_frame_interval *interval)
> >  {
> > -	struct max9286_priv *priv = sd_to_max9286(sd);
> > -
> > -	/*
> > -	 * FIXME: Implement support for V4L2_SUBDEV_FORMAT_TRY, using the V4L2
> > -	 * subdev active state API.
> > -	 */
> > -	if (interval->which != V4L2_SUBDEV_FORMAT_ACTIVE)
> > -		return -EINVAL;
> > -
> >  	if (interval->pad != MAX9286_SRC_PAD)
> >  		return -EINVAL;
> >
> > -	interval->interval = priv->interval;
> > +	interval->interval = *v4l2_subdev_state_get_interval(sd_state,
> > +							     interval->pad);
> >
> >  	return 0;
> >  }
> > @@ -895,19 +888,11 @@ static int max9286_set_frame_interval(struct v4l2_subdev *sd,
> >  				      struct v4l2_subdev_state *sd_state,
> >  				      struct v4l2_subdev_frame_interval *interval)
> >  {
> > -	struct max9286_priv *priv = sd_to_max9286(sd);
> > -
> > -	/*
> > -	 * FIXME: Implement support for V4L2_SUBDEV_FORMAT_TRY, using the V4L2
> > -	 * subdev active state API.
> > -	 */
> > -	if (interval->which != V4L2_SUBDEV_FORMAT_ACTIVE)
> > -		return -EINVAL;
> > -
> >  	if (interval->pad != MAX9286_SRC_PAD)
> >  		return -EINVAL;
> >
> > -	priv->interval = interval->interval;
> > +	*v4l2_subdev_state_get_interval(sd_state,
> > +					interval->pad) = interval->interval;
> >
> >  	return 0;
> >  }
> > @@ -993,9 +978,21 @@ static const struct v4l2_mbus_framefmt max9286_default_format = {
> >  static int max9286_init_state(struct v4l2_subdev *sd,
> >  			      struct v4l2_subdev_state *state)
> >  {
> > +	struct v4l2_fract *interval;
> > +
> >  	for (unsigned int i = 0; i < MAX9286_N_PADS; i++)
> >  		*v4l2_subdev_state_get_format(state, i) = max9286_default_format;
> >
> > +	/*
> > +	 * Special case: a null interval enables automatic FRAMESYNC mode.
> > +	 *
> > +	 * FRAMESYNC is taken from the slowest link. See register 0x01
> > +	 * configuration.
> > +	 */
> > +	interval = v4l2_subdev_state_get_interval(state, MAX9286_SRC_PAD);
> > +	interval->numerator = 0;
> > +	interval->denominator = 0;
> > +
> >  	return 0;
> >  }
> >
> > @@ -1142,7 +1139,13 @@ static int max9286_setup(struct max9286_priv *priv)
> >  	max9286_write(priv, 0x69, (0xf & ~priv->route_mask));
> >
> >  	max9286_set_video_format(priv, &max9286_default_format);
> > -	max9286_set_fsync_period(priv);
> > +
> > +	/*
> > +	 * Use automatic FRAMESYNC mode. FRAMESYNC is taken from the slowest
> > +	 * link.
> > +	 */
> > +	max9286_write(priv, 0x01, MAX9286_FSYNCMODE_INT_HIZ |
> > +				  MAX9286_FSYNCMETH_AUTO);
> >
> >  	cfg = max9286_read(priv, 0x1c);
> >  	if (cfg < 0)
>
> --
> Regards,
>
> Laurent Pinchart




[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux