Re: [PATCH v12 27/28] drm/rockchip: inno_hdmi: Switch to HDMI connector

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Maxime,

On 5/6/24 15:59, Maxime Ripard wrote:
Hi Andy,

Thanks a lot for giving it a try

All the issues you raised in your review are fixed.

On Sat, Apr 27, 2024 at 06:44:54PM GMT, Andy Yan wrote:
And after this whole series applied on linux 6.9-rc4, the display on rk3036 kylin is lost, I get
the following error:
[  178.999421] rockchip-drm display-subsystem: [drm:drm_atomic_check_only] checking 87b7fbde
[  178.999471] rockchip-drm display-subsystem: [drm:drm_atomic_helper_check_modeset] [CRTC:35:crtc-0] mode changed
[  178.999498] rockchip-drm display-subsystem: [drm:drm_atomic_helper_check_modeset] [CRTC:35:crtc-0] enable changed
[  178.999521] rockchip-drm display-subsystem: [drm:drm_atomic_helper_check_modeset] [CRTC:35:crtc-0] active changed
[  178.999547] rockchip-drm display-subsystem: [drm:drm_atomic_helper_check_modeset] Updating routing for [CONNECTOR:37:HDMI-A-1]
[  178.999575] rockchip-drm display-subsystem: [drm:drm_atomic_helper_check_modeset] [CONNECTOR:37:HDMI-A-1] using [ENCODER:36:TMDS-36] on [CRTC:35:crtc-0]
[  178.999604] rockchip-drm display-subsystem: [drm:drm_atomic_helper_connector_hdmi_check] Trying with a 8 bpc output
[  178.999636] rockchip-drm display-subsystem: [drm:drm_atomic_helper_connector_hdmi_check] Trying RGB output format
[  178.999730] rockchip-drm display-subsystem: [drm:drm_atomic_helper_connector_hdmi_check] RGB Format, checking the constraints.
[  178.999757] rockchip-drm display-subsystem: [drm:drm_atomic_helper_connector_hdmi_check] RGB output format not supported with 8 bpc
[  178.999783] rockchip-drm display-subsystem: [drm:drm_atomic_helper_connector_hdmi_check] Failed. No Format Supported for that bpc count.
[  178.999810] rockchip-drm display-subsystem: [drm:drm_atomic_helper_check_modeset] [CONNECTOR:37:HDMI-A-1] driver check failed
[  178.999836] rockchip-drm display-subsystem: [drm:drm_atomic_check_only] atomic driver check for 87b7fbde failed: -22
[  178.999868] rockchip-drm display-subsystem: [drm:drm_atomic_state_default_clear] Clearing atomic state 87b7fbde
[  178.999898] [drm:drm_mode_object_put] OBJ ID: 37 (4)
[  178.999922] [drm:drm_mode_object_put] OBJ ID: 37 (3)
[  178.999944] [drm:drm_mode_object_put] OBJ ID: 40 (1)
[  178.999971] [drm:drm_mode_object_put] OBJ ID: 39 (2)

Which kind of display are you testing with? The only reason it could do
so is if the display claim it doesn't support RGB in its EDID which is
contradicting the HDMI spec. Are you using an Analog display by any
chance? or the built-in EDIDs through the drm.edid_firmware mechanism?


It is because there is something wrong(I still don't know why) with the DDC on my board.
It always failed to read edid when it first bootup, that means inno_hdmi_connector_get_modes
will return 0.

and in function

drm_helper_probe_single_connector_modes:

        count = drm_helper_probe_get_modes(connector);

        if (count == 0 && (connector->status == connector_status_connected ||
                           connector->status == connector_status_unknown)) {
                count = drm_add_modes_noedid(connector, 1024, 768);

                /*
                 * Section 4.2.2.6 (EDID Corruption Detection) of the DP 1.4a
                 * Link CTS specifies that 640x480 (the official "failsafe"
                 * mode) needs to be the default if there's no EDID.
                 */
                if (connector->connector_type == DRM_MODE_CONNECTOR_DisplayPort)
                        drm_set_preferred_mode(connector, 640, 480);
        }
drm_add_modes_noedid will not initialize display_info.

Maxime




[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux