> -----Original Message----- > From: Aguirre, Sergio > Sent: Friday, November 19, 2010 9:44 AM > To: 'David Cohen' > Cc: Laurent Pinchart; linux-media@xxxxxxxxxxxxxxx > Subject: RE: [omap3isp][PATCH v2 8/9] omap3isp: ccp2: Make SYSCONFIG > fields consistent > > > > -----Original Message----- > > From: David Cohen [mailto:david.cohen@xxxxxxxxx] > > Sent: Friday, November 19, 2010 4:06 AM > > To: Aguirre, Sergio > > Cc: Laurent Pinchart; linux-media@xxxxxxxxxxxxxxx > > Subject: Re: [omap3isp][PATCH v2 8/9] omap3isp: ccp2: Make SYSCONFIG > > fields consistent > > > > Hi Sergio, > > Hi David, > > Thanks for the review. > > > > > I've few comments below. > > > > On Mon, Nov 15, 2010 at 03:30:00PM +0100, ext Sergio Aguirre wrote: > > > Signed-off-by: Sergio Aguirre <saaguirre@xxxxxx> > > > --- > > > drivers/media/video/isp/ispccp2.c | 3 +-- > > > drivers/media/video/isp/ispreg.h | 14 ++++++++------ > > > 2 files changed, 9 insertions(+), 8 deletions(-) > > > > > > diff --git a/drivers/media/video/isp/ispccp2.c > > b/drivers/media/video/isp/ispccp2.c > > > index fa23394..3127a74 100644 > > > --- a/drivers/media/video/isp/ispccp2.c > > > +++ b/drivers/media/video/isp/ispccp2.c > > > @@ -419,8 +419,7 @@ static void ispccp2_mem_configure(struct > > isp_ccp2_device *ccp2, > > > config->src_ofst = 0; > > > } > > > > > > - isp_reg_writel(isp, (ISPCSI1_MIDLEMODE_SMARTSTANDBY << > > > - ISPCSI1_MIDLEMODE_SHIFT), > > > + isp_reg_writel(isp, ISPCCP2_SYSCONFIG_MSTANDBY_MODE_SMART, > > > OMAP3_ISP_IOMEM_CCP2, ISPCCP2_SYSCONFIG); > > > > To make your cleanup even better, you could change isp_reg_clr_set() > > instead. > > If CCP2 MSTANDY_MODE is set to NOSTANDY, the result is going to be an > > invalid 0x3 value. Despite it cannot happen with the current code, it's > > still better to avoid such situations for future versions. :) > > Hmm you're right, I guess I didn't do any real functional changes, just > defines renaming. > > I can repost an updated patch with this suggestion. No problem. David, Geez I guess I wasn't paying much attention to this either. Sorry. The case you mention about it potentially become 0x3 is not possible, because, I'm basically overwriting the whole register with (0x2 << 12) Notice the isp_reg_write, there's no OR operation... Now, this means that we have been implicitly setting other fields as Zeroes (SOFT_RESET = 0, and AUTO_IDLE = 0) aswell. Has AUTOIDLE in CCP2 been tried in N900? I don't have a CCP2 sensor to test with :(. Regards, Sergio > > > > > > > > > /* Hsize, Skip */ > > > diff --git a/drivers/media/video/isp/ispreg.h > > b/drivers/media/video/isp/ispreg.h > > > index d885541..9b0d3ad 100644 > > > --- a/drivers/media/video/isp/ispreg.h > > > +++ b/drivers/media/video/isp/ispreg.h > > > @@ -141,6 +141,14 @@ > > > #define ISPCCP2_REVISION (0x000) > > > #define ISPCCP2_SYSCONFIG (0x004) > > > #define ISPCCP2_SYSCONFIG_SOFT_RESET (1 << 1) > > > +#define ISPCCP2_SYSCONFIG_AUTO_IDLE 0x1 > > > +#define ISPCCP2_SYSCONFIG_MSTANDBY_MODE_SHIFT 12 > > > +#define ISPCCP2_SYSCONFIG_MSTANDBY_MODE_FORCE \ > > > + (0x0 << ISPCCP2_SYSCONFIG_MSTANDBY_MODE_SHIFT) > > > +#define ISPCCP2_SYSCONFIG_MSTANDBY_MODE_NO \ > > > + (0x1 << ISPCCP2_SYSCONFIG_MSTANDBY_MODE_SHIFT) > > > +#define ISPCCP2_SYSCONFIG_MSTANDBY_MODE_SMART \ > > > + (0x2 << ISPCCP2_SYSCONFIG_MSTANDBY_MODE_SHIFT) > > > > You can add some ISPCCP2_SYSCONFIG_MSTANDY_MODE_MASK, as 2 bits must be > > always set together. > > Sure, will do. > > Thanks and Regards, > Sergio > > > > > Regards, > > > > David Cohen > > > > > #define ISPCCP2_SYSSTATUS (0x008) > > > #define ISPCCP2_SYSSTATUS_RESET_DONE (1 << 0) > > > #define ISPCCP2_LC01_IRQENABLE (0x00C) > > > @@ -1309,12 +1317,6 @@ > > > #define ISPMMU_SIDLEMODE_SMARTIDLE 2 > > > #define ISPMMU_SIDLEMODE_SHIFT 3 > > > > > > -#define ISPCSI1_AUTOIDLE 0x1 > > > -#define ISPCSI1_MIDLEMODE_SHIFT 12 > > > -#define ISPCSI1_MIDLEMODE_FORCESTANDBY 0x0 > > > -#define ISPCSI1_MIDLEMODE_NOSTANDBY 0x1 > > > -#define ISPCSI1_MIDLEMODE_SMARTSTANDBY 0x2 > > > - > > > /* ------------------------------------------------------------------ > -- > > --------- > > > * CSI2 receiver registers (ES2.0) > > > */ > > > -- > > > 1.7.0.4 > > > > > > -- > > > To unsubscribe from this list: send the line "unsubscribe linux-media" > > in > > > the body of a message to majordomo@xxxxxxxxxxxxxxx > > > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
