[PATCH linux-next] media: i2c: st-mipid02: replace of_node_put() with __free

[R Sundar <prosunofficial@xxxxxxxxx>]

Use the new cleanup magic to replace of_node_put() with
__free(device_node) marking to auto release and to simplify the error
paths.

Suggested-by: Julia Lawall <julia.lawall@xxxxxxxx>
Signed-off-by: R Sundar <prosunofficial@xxxxxxxxx>
---
 drivers/media/i2c/st-mipid02.c | 37 +++++++++-------------------------
 1 file changed, 9 insertions(+), 28 deletions(-)

diff --git a/drivers/media/i2c/st-mipid02.c b/drivers/media/i2c/st-mipid02.c
index f250640729ca..d42a306530f3 100644
--- a/drivers/media/i2c/st-mipid02.c
+++ b/drivers/media/i2c/st-mipid02.c
@@ -715,31 +715,28 @@ static int mipid02_parse_rx_ep(struct mipid02_dev *bridge)
 	struct v4l2_fwnode_endpoint ep = { .bus_type = V4L2_MBUS_CSI2_DPHY };
 	struct i2c_client *client = bridge->i2c_client;
 	struct v4l2_async_connection *asd;
-	struct device_node *ep_node;
 	int ret;
 
 	/* parse rx (endpoint 0) */
-	ep_node = of_graph_get_endpoint_by_regs(bridge->i2c_client->dev.of_node,
-						0, 0);
+	struct device_node *ep_node __free(device_node) =
+		of_graph_get_endpoint_by_regs(bridge->i2c_client->dev.of_node, 0, 0);
 	if (!ep_node) {
 		dev_err(&client->dev, "unable to find port0 ep");
-		ret = -EINVAL;
-		goto error;
+		return -EINVAL;
 	}
 
 	ret = v4l2_fwnode_endpoint_parse(of_fwnode_handle(ep_node), &ep);
 	if (ret) {
 		dev_err(&client->dev, "Could not parse v4l2 endpoint %d\n",
 			ret);
-		goto error_of_node_put;
+		return ret;
 	}
 
 	/* do some sanity checks */
 	if (ep.bus.mipi_csi2.num_data_lanes > 2) {
 		dev_err(&client->dev, "max supported data lanes is 2 / got %d",
 			ep.bus.mipi_csi2.num_data_lanes);
-		ret = -EINVAL;
-		goto error_of_node_put;
+		return -EINVAL;
 	}
 
 	/* register it for later use */
@@ -750,7 +747,6 @@ static int mipid02_parse_rx_ep(struct mipid02_dev *bridge)
 	asd = v4l2_async_nf_add_fwnode_remote(&bridge->notifier,
 					      of_fwnode_handle(ep_node),
 					      struct v4l2_async_connection);
-	of_node_put(ep_node);
 
 	if (IS_ERR(asd)) {
 		dev_err(&client->dev, "fail to register asd to notifier %ld",
@@ -764,46 +760,31 @@ static int mipid02_parse_rx_ep(struct mipid02_dev *bridge)
 		v4l2_async_nf_cleanup(&bridge->notifier);
 
 	return ret;
-
-error_of_node_put:
-	of_node_put(ep_node);
-error:
-
-	return ret;
 }
 
 static int mipid02_parse_tx_ep(struct mipid02_dev *bridge)
 {
 	struct v4l2_fwnode_endpoint ep = { .bus_type = V4L2_MBUS_PARALLEL };
 	struct i2c_client *client = bridge->i2c_client;
-	struct device_node *ep_node;
 	int ret;
 
 	/* parse tx (endpoint 2) */
-	ep_node = of_graph_get_endpoint_by_regs(bridge->i2c_client->dev.of_node,
-						2, 0);
+	struct device_node *ep_node =
+		of_graph_get_endpoint_by_regs(bridge->i2c_client->dev.of_node, 2, 0);
 	if (!ep_node) {
 		dev_err(&client->dev, "unable to find port1 ep");
-		ret = -EINVAL;
-		goto error;
+		return -EINVAL;
 	}
 
 	ret = v4l2_fwnode_endpoint_parse(of_fwnode_handle(ep_node), &ep);
 	if (ret) {
 		dev_err(&client->dev, "Could not parse v4l2 endpoint\n");
-		goto error_of_node_put;
+		return ret;
 	}
 
-	of_node_put(ep_node);
 	bridge->tx = ep;
 
 	return 0;
-
-error_of_node_put:
-	of_node_put(ep_node);
-error:
-
-	return -EINVAL;
 }
 
 static int mipid02_probe(struct i2c_client *client)
-- 
2.34.1