The len_routes field is used to tell the size of the routes array in
struct v4l2_subdev_routing. This way the number of routes returned from
S_ROUTING IOCTL may be larger than the number of routes provided, in case
there are more routes returned by the driver.
Note that this uAPI is still disabled in the code, so this change can
safely be done. Anyone who manually patched the code to enable this uAPI
must update their code.
Signed-off-by: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
---
.../media/v4l/vidioc-subdev-g-routing.rst | 46 +++++++++++++------
drivers/media/v4l2-core/v4l2-ioctl.c | 4 +-
drivers/media/v4l2-core/v4l2-subdev.c | 12 ++---
include/media/v4l2-subdev.h | 2 +
include/uapi/linux/v4l2-subdev.h | 9 ++--
5 files changed, 48 insertions(+), 25 deletions(-)
diff --git a/Documentation/userspace-api/media/v4l/vidioc-subdev-g-routing.rst b/Documentation/userspace-api/media/v4l/vidioc-subdev-g-routing.rst
index 26b5004bfe6d..cbd9370006b6 100644
--- a/Documentation/userspace-api/media/v4l/vidioc-subdev-g-routing.rst
+++ b/Documentation/userspace-api/media/v4l/vidioc-subdev-g-routing.rst
@@ -43,23 +43,38 @@ The routing configuration determines the flows of data inside an entity.
Drivers report their current routing tables using the
``VIDIOC_SUBDEV_G_ROUTING`` ioctl and application may enable or disable routes
with the ``VIDIOC_SUBDEV_S_ROUTING`` ioctl, by adding or removing routes and
-setting or clearing flags of the ``flags`` field of a
-struct :c:type:`v4l2_subdev_route`.
+setting or clearing flags of the ``flags`` field of a struct
+:c:type:`v4l2_subdev_route`.
-All stream configurations are reset when ``VIDIOC_SUBDEV_S_ROUTING`` is called. This
-means that the userspace must reconfigure all streams after calling the ioctl
-with e.g. ``VIDIOC_SUBDEV_S_FMT``.
+All stream configurations are reset when ``VIDIOC_SUBDEV_S_ROUTING`` is called.
+This means that the userspace must reconfigure all stream formats and selections
+after calling the ioctl with e.g. ``VIDIOC_SUBDEV_S_FMT``.
Only subdevices which have both sink and source pads can support routing.
-When inspecting routes through ``VIDIOC_SUBDEV_G_ROUTING`` and the application
-provided ``num_routes`` is not big enough to contain all the available routes
-the subdevice exposes, drivers return the ENOSPC error code and adjust the
-value of the ``num_routes`` field. Application should then reserve enough memory
-for all the route entries and call ``VIDIOC_SUBDEV_G_ROUTING`` again.
-
-On a successful ``VIDIOC_SUBDEV_G_ROUTING`` call the driver updates the
-``num_routes`` field to reflect the actual number of routes returned.
+The ``len_routes`` field indicates the number of routes that can fit in the
+``routes`` array allocated by userspace. It is set by applications for both
+ioctls to indicate how many routes the kernel can return, and is never modified
+by the kernel.
+
+The ``num_routes`` field indicates the number of routes in the routing
+table. For ``VIDIOC_SUBDEV_S_ROUTING``, it is set by userspace to the number of
+routes that the application stored in the ``routes`` array. For both ioctls, it
+is returned by the kernel and indicates how many routes are stored in the
+subdevice routing table. This may be smaller or larger than the value of
+``num_routes`` set by the application for ``VIDIOC_SUBDEV_S_ROUTING``, as
+drivers may adjust the requested routing table.
+
+The kernel can return a ``num_routes`` value larger than ``len_routes`` from
+both ioctls. This indicates thare are more routes in the routing table than fits
+the ``routes`` array. In this case, the ``routes`` array is filled by the kernel
+with the first ``len_routes`` entries of the subdevice routing table. This is
+not considered to be an error, and the ioctl call succeeds. If the applications
+wants to retrieve the missing routes, it can issue a new
+``VIDIOC_SUBDEV_G_ROUTING`` call with a large enough ``routes`` array.
+
+``VIDIOC_SUBDEV_S_ROUTING`` may return more routes than the user provided in
+``num_routes`` field due to e.g. hardware properties.
.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
@@ -74,6 +89,9 @@ On a successful ``VIDIOC_SUBDEV_G_ROUTING`` call the driver updates the
- ``which``
- Routing table to be accessed, from enum
:ref:`v4l2_subdev_format_whence <v4l2-subdev-format-whence>`.
+ * - __u32
+ - ``len_routes``
+ - The length of the array (as in memory reserved for the array)
* - struct :c:type:`v4l2_subdev_route`
- ``routes[]``
- Array of struct :c:type:`v4l2_subdev_route` entries
@@ -81,7 +99,7 @@ On a successful ``VIDIOC_SUBDEV_G_ROUTING`` call the driver updates the
- ``num_routes``
- Number of entries of the routes array
* - __u32
- - ``reserved``\ [5]
+ - ``reserved``\ [11]
- Reserved for future extensions. Applications and drivers must set
the array to zero.
diff --git a/drivers/media/v4l2-core/v4l2-ioctl.c b/drivers/media/v4l2-core/v4l2-ioctl.c
index 0260acef97d2..aab671fae45b 100644
--- a/drivers/media/v4l2-core/v4l2-ioctl.c
+++ b/drivers/media/v4l2-core/v4l2-ioctl.c
@@ -3201,13 +3201,13 @@ static int check_array_args(unsigned int cmd, void *parg, size_t *array_size,
case VIDIOC_SUBDEV_S_ROUTING: {
struct v4l2_subdev_routing *routing = parg;
- if (routing->num_routes > 256)
+ if (routing->len_routes > 256)
return -E2BIG;
*user_ptr = u64_to_user_ptr(routing->routes);
*kernel_ptr = (void **)&routing->routes;
*array_size = sizeof(struct v4l2_subdev_route)
- * routing->num_routes;
+ * routing->len_routes;
ret = 1;
break;
}
diff --git a/drivers/media/v4l2-core/v4l2-subdev.c b/drivers/media/v4l2-core/v4l2-subdev.c
index 779583447eac..b565f202df67 100644
--- a/drivers/media/v4l2-core/v4l2-subdev.c
+++ b/drivers/media/v4l2-core/v4l2-subdev.c
@@ -960,14 +960,10 @@ static long subdev_do_ioctl(struct file *file, unsigned int cmd, void *arg,
krouting = &state->routing;
- if (routing->num_routes < krouting->num_routes) {
- routing->num_routes = krouting->num_routes;
- return -ENOSPC;
- }
-
memcpy((struct v4l2_subdev_route *)(uintptr_t)routing->routes,
krouting->routes,
- krouting->num_routes * sizeof(*krouting->routes));
+ min(krouting->num_routes, routing->len_routes) *
+ sizeof(*krouting->routes));
routing->num_routes = krouting->num_routes;
return 0;
@@ -989,6 +985,9 @@ static long subdev_do_ioctl(struct file *file, unsigned int cmd, void *arg,
if (routing->which != V4L2_SUBDEV_FORMAT_TRY && ro_subdev)
return -EPERM;
+ if (routing->num_routes > routing->len_routes)
+ return -EINVAL;
+
memset(routing->reserved, 0, sizeof(routing->reserved));
for (i = 0; i < routing->num_routes; ++i) {
@@ -1015,6 +1014,7 @@ static long subdev_do_ioctl(struct file *file, unsigned int cmd, void *arg,
}
krouting.num_routes = routing->num_routes;
+ krouting.len_routes = routing->len_routes;
krouting.routes = routes;
return v4l2_subdev_call(sd, pad, set_routing, state,
diff --git a/include/media/v4l2-subdev.h b/include/media/v4l2-subdev.h
index e22c50ce7e05..e30c463d90e5 100644
--- a/include/media/v4l2-subdev.h
+++ b/include/media/v4l2-subdev.h
@@ -714,12 +714,14 @@ struct v4l2_subdev_stream_configs {
/**
* struct v4l2_subdev_krouting - subdev routing table
*
+ * @len_routes: length of routes array, in routes
* @num_routes: number of routes
* @routes: &struct v4l2_subdev_route
*
* This structure contains the routing table for a subdev.
*/
struct v4l2_subdev_krouting {
+ unsigned int len_routes;
unsigned int num_routes;
struct v4l2_subdev_route *routes;
};
diff --git a/include/uapi/linux/v4l2-subdev.h b/include/uapi/linux/v4l2-subdev.h
index 81a24bd38003..6a39128d0606 100644
--- a/include/uapi/linux/v4l2-subdev.h
+++ b/include/uapi/linux/v4l2-subdev.h
@@ -228,15 +228,18 @@ struct v4l2_subdev_route {
* struct v4l2_subdev_routing - Subdev routing information
*
* @which: configuration type (from enum v4l2_subdev_format_whence)
- * @num_routes: the total number of routes in the routes array
+ * @len_routes: the length of the routes array, in routes
* @routes: pointer to the routes array
+ * @num_routes: the total number of routes, possibly more than fits in the
+ * routes array
* @reserved: drivers and applications must zero this array
*/
struct v4l2_subdev_routing {
__u32 which;
- __u32 num_routes;
+ __u32 len_routes;
__u64 routes;
- __u32 reserved[6];
+ __u32 num_routes;
+ __u32 reserved[11];
};
/*
--
2.39.2
