[PATCH 09/14] media: Documentation: Document S_ROUTING behaviour

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Document S_ROUTING behaviour for different devices.

Generally in devices that produce streams the streams are static and some
can be enabled and disabled, whereas in devices that just transport them
or write them to memory, more configurability is allowed. Document this.

Signed-off-by: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
Reviewed-by: Julien Massot <julien.massot@xxxxxxxxxxxxx>
---
 .../userspace-api/media/v4l/dev-subdev.rst    | 23 +++++++++++++++++++
 1 file changed, 23 insertions(+)

diff --git a/Documentation/userspace-api/media/v4l/dev-subdev.rst b/Documentation/userspace-api/media/v4l/dev-subdev.rst
index b76e02e54512..0f9eda3187f3 100644
--- a/Documentation/userspace-api/media/v4l/dev-subdev.rst
+++ b/Documentation/userspace-api/media/v4l/dev-subdev.rst
@@ -572,6 +572,29 @@ Any configurations of a stream within a pad, such as format or selections,
 are independent of similar configurations on other streams. This is
 subject to change in the future.
 
+Device types and routing setup
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Different kinds of sub-devices have differing behaviour for route activation,
+depending on the hardware. In all cases, however, only routes that have the
+``V4L2_SUBDEV_STREAM_FL_ACTIVE`` flag set are active.
+
+Devices generating the streams may allow enabling and disabling some of the
+routes or have a fixed routing configuration. If the routes can be disabled, not
+declaring the routes (or declaring them without
+``VIDIOC_SUBDEV_STREAM_FL_ACTIVE`` flag set) in ``VIDIOC_SUBDEV_S_ROUTING`` will
+disable the routes. ``VIDIOC_SUBDEV_S_ROUTING`` will still return such routes
+back to the user in the routes array, with the ``V4L2_SUBDEV_STREAM_FL_ACTIVE``
+flag unset.
+
+Devices transporting the streams almost always have more configurability with
+respect to routing. Typically any route between the sub-device's sink and source
+pads is possible, and multiple routes (usually up to certain limited number) may
+be active simultaneously. For such devices, no routes are created by the driver
+and user-created routes are fully replaced when ``VIDIOC_SUBDEV_S_ROUTING`` is
+called on the sub-device. Such newly created routes have the device's default
+configuration for format and selection rectangles.
+
 Configuring streams
 ^^^^^^^^^^^^^^^^^^^
 
-- 
2.39.2





[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux