[PATCH 0/2] media: Add driver for ST VD56G3 camera sensor

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello,

This serie adds support for STMicroelectronics VD56G3 camera sensor.
This is a 1.5M pixel global shutter camera available in both Mono
(VD56G3) and colour (VD66GY) variants.

The following features are supported:
- Auto exposure with expo bias or
- Manual exposure with analog / digital gain
- H/V flip
- vblank/hblank/link freq
- Test pattern
- Supported resolutions in both raw8/raw10 :
   - 1124x1364
   - 1120x1360
   - 1024x1280
   - 1024x768
   - 768x1024
   - 720x1280
   - 640x480
   - 480x640
   - 320x240


This driver supports coldstart parameters for internal AE feature.
To make it work, the driver save gain/expo values in ctrl's cur.val
during poweroff phase.
This implementation transgress V4L2 rules... Any advice to make it
proper would be greatly appreciated.

Driver tested on RB5 and RPI (with and without libcamera).


Sylvain Petinot (2):
  media: dt-bindings: Add ST VD56G3 camera sensor binding
  media: i2c: Add driver for ST VD56G3 camera sensor

 .../bindings/media/i2c/st,st-vd56g3.yaml      |  143 ++
 MAINTAINERS                                   |    9 +
 drivers/media/i2c/Kconfig                     |   11 +
 drivers/media/i2c/Makefile                    |    1 +
 drivers/media/i2c/st-vd56g3.c                 | 1619 +++++++++++++++++
 5 files changed, 1783 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/i2c/st,st-vd56g3.yaml
 create mode 100644 drivers/media/i2c/st-vd56g3.c

-- 
2.17.1





[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux