Add support for embedded data. This introduces two internal pads for pixel
and embedded data streams. As the driver supports a single mode only,
there's no need for backward compatibility in mode selection.
The embedded data is configured to be placed before the image data whereas
after the image data is the default.
Signed-off-by: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
---
drivers/media/i2c/ov2740.c | 156 +++++++++++++++++++++++++++++++++----
1 file changed, 141 insertions(+), 15 deletions(-)
diff --git a/drivers/media/i2c/ov2740.c b/drivers/media/i2c/ov2740.c
index c29e9b8cde15..dc0931308053 100644
--- a/drivers/media/i2c/ov2740.c
+++ b/drivers/media/i2c/ov2740.c
@@ -11,6 +11,7 @@
#include <linux/pm_runtime.h>
#include <linux/nvmem-provider.h>
#include <linux/regmap.h>
+#include <media/mipi-csi2.h>
#include <media/v4l2-ctrls.h>
#include <media/v4l2-device.h>
#include <media/v4l2-fwnode.h>
@@ -71,11 +72,31 @@
#define OV2740_REG_ISP_CTRL00 0x5000
/* ISP CTRL01 */
#define OV2740_REG_ISP_CTRL01 0x5001
+
+/* Embedded data line location control */
+#define OV2740_REG_EMBEDDED_FLAG 0x5a08
+#define OV2740_EMBEDDED_FLAG_FOOTER BIT(2) /* otherwise it's in header */
+#define OV2740_EMBEDDED_FLAG_MYSTERY BIT(1)
/* Customer Addresses: 0x7010 - 0x710F */
#define CUSTOMER_USE_OTP_SIZE 0x100
/* OTP registers from sensor */
#define OV2740_REG_OTP_CUSTOMER 0x7010
+enum {
+ OV2740_PAD_SOURCE,
+ OV2740_PAD_PIXEL,
+ OV2740_PAD_META,
+ OV2740_NUM_PADS,
+};
+
+enum {
+ OV2740_STREAM_PIXEL,
+ OV2740_STREAM_META,
+};
+
+#define OV2740_META_WIDTH 100U
+#define OV2740_META_HEIGHT 1U
+
struct nvm_data {
struct nvmem_device *nvmem;
struct regmap *regmap;
@@ -149,6 +170,7 @@ static const struct ov2740_reg mode_1932x1092_regs_360mhz[] = {
{0x3000, 0x00},
{0x3018, 0x32},
{0x3031, 0x0a},
+ {0x3036, 0x12},
{0x3080, 0x08},
{0x3083, 0xB4},
{0x3103, 0x00},
@@ -253,7 +275,7 @@ static const struct ov2740_reg mode_1932x1092_regs_360mhz[] = {
{0x4017, 0x10},
{0x4044, 0x02},
{0x4304, 0x08},
- {0x4307, 0x30},
+ {0x4307, 0x31},
{0x4320, 0x80},
{0x4322, 0x00},
{0x4323, 0x00},
@@ -302,6 +324,7 @@ static const struct ov2740_reg mode_1932x1092_regs_180mhz[] = {
{0x3000, 0x00},
{0x3018, 0x32}, /* 0x32 for 2 lanes, 0x12 for 1 lane */
{0x3031, 0x0a},
+ {0x3036, 0x12},
{0x3080, 0x08},
{0x3083, 0xB4},
{0x3103, 0x00},
@@ -406,7 +429,7 @@ static const struct ov2740_reg mode_1932x1092_regs_180mhz[] = {
{0x4017, 0x10},
{0x4044, 0x02},
{0x4304, 0x08},
- {0x4307, 0x30},
+ {0x4307, 0x31},
{0x4320, 0x80},
{0x4322, 0x00},
{0x4323, 0x00},
@@ -513,7 +536,7 @@ static const struct ov2740_mode supported_modes_180mhz[] = {
struct ov2740 {
struct v4l2_subdev sd;
- struct media_pad pad;
+ struct media_pad pads[OV2740_NUM_PADS];
struct v4l2_ctrl_handler ctrl_handler;
/* V4L2 Controls */
@@ -973,6 +996,11 @@ static int ov2740_enable_streams(struct v4l2_subdev *sd,
if (ret)
goto out_pm_put;
+ ret = ov2740_write_reg(ov2740, OV2740_REG_EMBEDDED_FLAG, 1,
+ OV2740_EMBEDDED_FLAG_MYSTERY);
+ if (ret)
+ goto out_pm_put;
+
ret = ov2740_write_reg(ov2740, OV2740_REG_MODE_SELECT, 1,
OV2740_MODE_STREAMING);
if (ret) {
@@ -1010,23 +1038,49 @@ static int ov2740_disable_streams(struct v4l2_subdev *sd,
return ret;
}
-static int ov2740_set_format(struct v4l2_subdev *sd,
- struct v4l2_subdev_state *sd_state,
- struct v4l2_subdev_format *fmt)
+static int __ov2740_set_format(struct v4l2_subdev *sd,
+ struct v4l2_subdev_state *sd_state,
+ struct v4l2_mbus_framefmt *format,
+ enum v4l2_subdev_format_whence which,
+ unsigned int pad, unsigned int stream)
{
+ struct v4l2_mbus_framefmt *src_pix_fmt, *src_meta_fmt, *pix_fmt,
+ *meta_fmt;
struct ov2740 *ov2740 = to_ov2740(sd);
const struct ov2740_mode *mode;
s32 vblank_def, h_blank;
+ /*
+ * Allow setting format on internal pixel pad as well as the source
+ * pad's pixel stream (for compatibility).
+ */
+ if ((pad == OV2740_PAD_SOURCE && stream == OV2740_STREAM_META) ||
+ pad == OV2740_PAD_META) {
+ *format = *v4l2_subdev_state_get_format(sd_state, pad, stream);
+ return 0;
+ }
+
+ pix_fmt = v4l2_subdev_state_get_format(sd_state, OV2740_PAD_PIXEL, 0);
+ meta_fmt = v4l2_subdev_state_get_format(sd_state, OV2740_PAD_META, 0);
+ src_pix_fmt = v4l2_subdev_state_get_format(sd_state, OV2740_PAD_SOURCE,
+ OV2740_STREAM_PIXEL);
+ src_meta_fmt = v4l2_subdev_state_get_format(sd_state, OV2740_PAD_SOURCE,
+ OV2740_STREAM_META);
+
mode = v4l2_find_nearest_size(ov2740->supported_modes,
ov2740->supported_modes_count,
width, height,
- fmt->format.width, fmt->format.height);
+ format->width, format->height);
+ ov2740_update_pad_format(mode, pix_fmt);
+ *format = *src_pix_fmt = *pix_fmt;
- ov2740_update_pad_format(mode, &fmt->format);
- *v4l2_subdev_state_get_format(sd_state, fmt->pad) = fmt->format;
+ meta_fmt->code = MEDIA_BUS_FMT_OV2740_EMBEDDED;
+ meta_fmt->width = OV2740_META_WIDTH;
+ meta_fmt->height = OV2740_META_HEIGHT;
+ *src_meta_fmt = *meta_fmt;
+ src_meta_fmt->code = MEDIA_BUS_FMT_META_10;
- if (fmt->which == V4L2_SUBDEV_FORMAT_TRY)
+ if (which == V4L2_SUBDEV_FORMAT_TRY)
return 0;
ov2740->cur_mode = mode;
@@ -1046,6 +1100,14 @@ static int ov2740_set_format(struct v4l2_subdev *sd,
return 0;
}
+static int ov2740_set_format(struct v4l2_subdev *sd,
+ struct v4l2_subdev_state *sd_state,
+ struct v4l2_subdev_format *fmt)
+{
+ return __ov2740_set_format(sd, sd_state, &fmt->format, fmt->which,
+ fmt->pad, fmt->stream);
+}
+
static int ov2740_enum_mbus_code(struct v4l2_subdev *sd,
struct v4l2_subdev_state *sd_state,
struct v4l2_subdev_mbus_code_enum *code)
@@ -1082,10 +1144,68 @@ static int ov2740_enum_frame_size(struct v4l2_subdev *sd,
static int ov2740_init_state(struct v4l2_subdev *sd,
struct v4l2_subdev_state *sd_state)
{
+ struct v4l2_subdev_route routes[] = {
+ {
+ .sink_pad = OV2740_PAD_PIXEL,
+ .source_pad = OV2740_PAD_SOURCE,
+ .source_stream = OV2740_STREAM_PIXEL,
+ .flags = V4L2_SUBDEV_ROUTE_FL_ACTIVE,
+ }, {
+ .sink_pad = OV2740_PAD_META,
+ .source_pad = OV2740_PAD_SOURCE,
+ .source_stream = OV2740_STREAM_META,
+ .flags = V4L2_SUBDEV_ROUTE_FL_ACTIVE,
+ },
+ };
+ struct v4l2_subdev_krouting routing = {
+ .routes = routes,
+ .num_routes = ARRAY_SIZE(routes),
+ };
+ struct v4l2_subdev_state *active_state;
+ struct v4l2_mbus_framefmt format = { 0 };
struct ov2740 *ov2740 = to_ov2740(sd);
+ int ret;
+
+ ret = v4l2_subdev_set_routing(sd, sd_state, &routing);
+ if (ret)
+ return ret;
+
+ active_state = v4l2_subdev_get_locked_active_state(sd);
+
+ ov2740_update_pad_format(&ov2740->supported_modes[0], &format);
+
+ return __ov2740_set_format(sd, sd_state, &format,
+ active_state == sd_state ?
+ V4L2_SUBDEV_FORMAT_ACTIVE :
+ V4L2_SUBDEV_FORMAT_TRY, OV2740_PAD_PIXEL, 0);
+}
+
+static int ov2740_get_frame_desc(struct v4l2_subdev *sd, unsigned int pad,
+ struct v4l2_mbus_frame_desc *desc)
+{
+ struct v4l2_mbus_frame_desc_entry *entry = desc->entry;
+ struct v4l2_subdev_state *sd_state;
+ struct v4l2_mbus_framefmt *fmt;
+
+ desc->type = V4L2_MBUS_FRAME_DESC_TYPE_CSI2;
+
+ sd_state = v4l2_subdev_lock_and_get_active_state(sd);
+ fmt = v4l2_subdev_state_get_format(sd_state, OV2740_PAD_SOURCE,
+ OV2740_STREAM_PIXEL);
+ entry->pixelcode = fmt->code;
+ v4l2_subdev_unlock_state(sd_state);
+
+ entry->stream = OV2740_STREAM_PIXEL;
+ entry->bus.csi2.dt = MIPI_CSI2_DT_RAW10;
+ entry++;
+ desc->num_entries++;
+
+ entry->pixelcode = MEDIA_BUS_FMT_META_10;
+ entry->stream = OV2740_STREAM_META;
+ entry->bus.csi2.dt = MIPI_CSI2_DT_EMBEDDED_8B;
+ entry++;
+ desc->num_entries++;
- ov2740_update_pad_format(&ov2740->supported_modes[0],
- v4l2_subdev_state_get_format(sd_state, 0));
return 0;
}
@@ -1100,6 +1220,7 @@ static const struct v4l2_subdev_pad_ops ov2740_pad_ops = {
.enum_frame_size = ov2740_enum_frame_size,
.enable_streams = ov2740_enable_streams,
.disable_streams = ov2740_disable_streams,
+ .get_frame_desc = ov2740_get_frame_desc,
};
static const struct v4l2_subdev_ops ov2740_subdev_ops = {
@@ -1366,11 +1487,16 @@ static int ov2740_probe(struct i2c_client *client)
}
ov2740->sd.state_lock = ov2740->ctrl_handler.lock;
- ov2740->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
+ ov2740->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE | V4L2_SUBDEV_FL_STREAMS;
ov2740->sd.entity.ops = &ov2740_subdev_entity_ops;
ov2740->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR;
- ov2740->pad.flags = MEDIA_PAD_FL_SOURCE;
- ret = media_entity_pads_init(&ov2740->sd.entity, 1, &ov2740->pad);
+ ov2740->pads[OV2740_PAD_SOURCE].flags = MEDIA_PAD_FL_SOURCE;
+ ov2740->pads[OV2740_PAD_PIXEL].flags =
+ MEDIA_PAD_FL_SINK | MEDIA_PAD_FL_INTERNAL;
+ ov2740->pads[OV2740_PAD_META].flags =
+ MEDIA_PAD_FL_SINK | MEDIA_PAD_FL_INTERNAL;
+ ret = media_entity_pads_init(&ov2740->sd.entity,
+ ARRAY_SIZE(ov2740->pads), ov2740->pads);
if (ret) {
dev_err_probe(dev, ret, "failed to init entity pads\n");
goto probe_error_v4l2_ctrl_handler_free;
--
2.39.2
