Re: [PATCH v3 1/9] drm: xlnx: zynqmp_dpsub: Set layer mode during creation

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 21/03/2024 22:43, Anatoliy Klymenko wrote:
Set layer mode of operation (live or dma-based) during layer creation.

Each DPSUB layer mode of operation is defined by corresponding DT node port
connection, so it is possible to assign it during layer object creation.
Previously it was set in layer enable functions, although it is too late
as setting layer format depends on layer mode, and should be done before
given layer enabled.

Signed-off-by: Anatoliy Klymenko <anatoliy.klymenko@xxxxxxx>
Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
---
  drivers/gpu/drm/xlnx/zynqmp_disp.c | 20 ++++++++++++++++----
  drivers/gpu/drm/xlnx/zynqmp_disp.h | 13 +------------
  drivers/gpu/drm/xlnx/zynqmp_dp.c   |  2 +-
  drivers/gpu/drm/xlnx/zynqmp_kms.c  |  2 +-
  4 files changed, 19 insertions(+), 18 deletions(-)

diff --git a/drivers/gpu/drm/xlnx/zynqmp_disp.c b/drivers/gpu/drm/xlnx/zynqmp_disp.c
index 8a39b3accce5..e6d26ef60e89 100644
--- a/drivers/gpu/drm/xlnx/zynqmp_disp.c
+++ b/drivers/gpu/drm/xlnx/zynqmp_disp.c
@@ -64,6 +64,16 @@
#define ZYNQMP_DISP_MAX_NUM_SUB_PLANES 3 +/**
+ * enum zynqmp_dpsub_layer_mode - Layer mode
+ * @ZYNQMP_DPSUB_LAYER_NONLIVE: non-live (memory) mode
+ * @ZYNQMP_DPSUB_LAYER_LIVE: live (stream) mode
+ */
+enum zynqmp_dpsub_layer_mode {
+	ZYNQMP_DPSUB_LAYER_NONLIVE,
+	ZYNQMP_DPSUB_LAYER_LIVE,
+};
+
  /**
   * struct zynqmp_disp_format - Display subsystem format information
   * @drm_fmt: DRM format (4CC)
@@ -902,15 +912,12 @@ u32 *zynqmp_disp_layer_drm_formats(struct zynqmp_disp_layer *layer,
  /**
   * zynqmp_disp_layer_enable - Enable a layer
   * @layer: The layer
- * @mode: Operating mode of layer
   *
   * Enable the @layer in the audio/video buffer manager and the blender. DMA
   * channels are started separately by zynqmp_disp_layer_update().
   */
-void zynqmp_disp_layer_enable(struct zynqmp_disp_layer *layer,
-			      enum zynqmp_dpsub_layer_mode mode)
+void zynqmp_disp_layer_enable(struct zynqmp_disp_layer *layer)
  {
-	layer->mode = mode;
  	zynqmp_disp_avbuf_enable_video(layer->disp, layer);
  	zynqmp_disp_blend_layer_enable(layer->disp, layer);
  }
@@ -1134,6 +1141,11 @@ static int zynqmp_disp_create_layers(struct zynqmp_disp *disp)
  		layer->id = i;
  		layer->disp = disp;
  		layer->info = &layer_info[i];
+		/* For now assume dpsub works in either live or non-live mode for both layers.
+		 * Hybrid mode is not supported yet.
+		 */

This comment style is not according to the style guide, and in fact you fix it in the patch 4. So please fix it here instead.

 Tomi

+		layer->mode = disp->dpsub->dma_enabled ? ZYNQMP_DPSUB_LAYER_NONLIVE
+						       : ZYNQMP_DPSUB_LAYER_LIVE;
ret = zynqmp_disp_layer_request_dma(disp, layer);
  		if (ret)
diff --git a/drivers/gpu/drm/xlnx/zynqmp_disp.h b/drivers/gpu/drm/xlnx/zynqmp_disp.h
index 123cffac08be..9b8b202224d9 100644
--- a/drivers/gpu/drm/xlnx/zynqmp_disp.h
+++ b/drivers/gpu/drm/xlnx/zynqmp_disp.h
@@ -42,16 +42,6 @@ enum zynqmp_dpsub_layer_id {
  	ZYNQMP_DPSUB_LAYER_GFX,
  };
-/**
- * enum zynqmp_dpsub_layer_mode - Layer mode
- * @ZYNQMP_DPSUB_LAYER_NONLIVE: non-live (memory) mode
- * @ZYNQMP_DPSUB_LAYER_LIVE: live (stream) mode
- */
-enum zynqmp_dpsub_layer_mode {
-	ZYNQMP_DPSUB_LAYER_NONLIVE,
-	ZYNQMP_DPSUB_LAYER_LIVE,
-};
-
  void zynqmp_disp_enable(struct zynqmp_disp *disp);
  void zynqmp_disp_disable(struct zynqmp_disp *disp);
  int zynqmp_disp_setup_clock(struct zynqmp_disp *disp,
@@ -62,8 +52,7 @@ void zynqmp_disp_blend_set_global_alpha(struct zynqmp_disp *disp,
u32 *zynqmp_disp_layer_drm_formats(struct zynqmp_disp_layer *layer,
  				   unsigned int *num_formats);
-void zynqmp_disp_layer_enable(struct zynqmp_disp_layer *layer,
-			      enum zynqmp_dpsub_layer_mode mode);
+void zynqmp_disp_layer_enable(struct zynqmp_disp_layer *layer);
  void zynqmp_disp_layer_disable(struct zynqmp_disp_layer *layer);
  void zynqmp_disp_layer_set_format(struct zynqmp_disp_layer *layer,
  				  const struct drm_format_info *info);
diff --git a/drivers/gpu/drm/xlnx/zynqmp_dp.c b/drivers/gpu/drm/xlnx/zynqmp_dp.c
index 1846c4971fd8..04b6bcac3b07 100644
--- a/drivers/gpu/drm/xlnx/zynqmp_dp.c
+++ b/drivers/gpu/drm/xlnx/zynqmp_dp.c
@@ -1295,7 +1295,7 @@ static void zynqmp_dp_disp_enable(struct zynqmp_dp *dp,
  	/* TODO: Make the format configurable. */
  	info = drm_format_info(DRM_FORMAT_YUV422);
  	zynqmp_disp_layer_set_format(layer, info);
-	zynqmp_disp_layer_enable(layer, ZYNQMP_DPSUB_LAYER_LIVE);
+	zynqmp_disp_layer_enable(layer);
if (layer_id == ZYNQMP_DPSUB_LAYER_GFX)
  		zynqmp_disp_blend_set_global_alpha(dp->dpsub->disp, true, 255);
diff --git a/drivers/gpu/drm/xlnx/zynqmp_kms.c b/drivers/gpu/drm/xlnx/zynqmp_kms.c
index db3bb4afbfc4..43bf416b33d5 100644
--- a/drivers/gpu/drm/xlnx/zynqmp_kms.c
+++ b/drivers/gpu/drm/xlnx/zynqmp_kms.c
@@ -122,7 +122,7 @@ static void zynqmp_dpsub_plane_atomic_update(struct drm_plane *plane,
/* Enable or re-enable the plane if the format has changed. */
  	if (format_changed)
-		zynqmp_disp_layer_enable(layer, ZYNQMP_DPSUB_LAYER_NONLIVE);
+		zynqmp_disp_layer_enable(layer);
  }
static const struct drm_plane_helper_funcs zynqmp_dpsub_plane_helper_funcs = {






[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux