Re: [PATCH 09/23] media: i2c: imx258: Add support for running on 2 CSI data lanes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 3/28/24 02:19, Sakari Ailus wrote:
> Hi Luigi311, Dave,
> 
> On Wed, Mar 27, 2024 at 05:16:55PM -0600, git@xxxxxxxxxxxx wrote:
>> From: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
>>
>> Extends the driver to also support 2 data lanes.
>> Frame rates are obviously more restricted on 2 lanes, but some
>> hardware simply hasn't wired more up.
>>
>> Signed-off-by: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
>> Signed-off-by: Luigi311 <git@xxxxxxxxxxxx>
>> ---
>>  drivers/media/i2c/imx258.c | 214 ++++++++++++++++++++++++++++++++-----
>>  1 file changed, 190 insertions(+), 24 deletions(-)
>>
>> diff --git a/drivers/media/i2c/imx258.c b/drivers/media/i2c/imx258.c
>> index 6ee7de079454..c65b9aad3b0a 100644
>> --- a/drivers/media/i2c/imx258.c
>> +++ b/drivers/media/i2c/imx258.c
>> @@ -86,12 +86,18 @@ struct imx258_reg_list {
>>  	const struct imx258_reg *regs;
>>  };
>>  
>> +enum {
>> +	IMX258_2_LANE_MODE,
>> +	IMX258_4_LANE_MODE,
>> +	IMX258_LANE_CONFIGS,
>> +};
>> +
>>  /* Link frequency config */
>>  struct imx258_link_freq_config {
>>  	u32 pixels_per_line;
>>  
>>  	/* PLL registers for this link frequency */
>> -	struct imx258_reg_list reg_list;
>> +	struct imx258_reg_list reg_list[IMX258_LANE_CONFIGS];
>>  };
>>  
>>  /* Mode : resolution and related config&values */
>> @@ -111,8 +117,34 @@ struct imx258_mode {
>>  	struct imx258_reg_list reg_list;
>>  };
>>  
>> -/* 4208x3120 needs 1267Mbps/lane, 4 lanes */
>> -static const struct imx258_reg mipi_1267mbps_19_2mhz[] = {
>> +/*
>> + * 4208x3120 @ 30 fps needs 1267Mbps/lane, 4 lanes.
>> + * To avoid further computation of clock settings, adopt the same per
>> + * lane data rate when using 2 lanes, thus allowing a maximum of 15fps.
>> + */
>> +static const struct imx258_reg mipi_1267mbps_19_2mhz_2l[] = {
>> +	{ 0x0136, 0x13 },
>> +	{ 0x0137, 0x33 },
>> +	{ 0x0301, 0x0A },
>> +	{ 0x0303, 0x02 },
>> +	{ 0x0305, 0x03 },
>> +	{ 0x0306, 0x00 },
>> +	{ 0x0307, 0xC6 },
>> +	{ 0x0309, 0x0A },
>> +	{ 0x030B, 0x01 },
>> +	{ 0x030D, 0x02 },
>> +	{ 0x030E, 0x00 },
>> +	{ 0x030F, 0xD8 },
>> +	{ 0x0310, 0x00 },
>> +
>> +	{ 0x0114, 0x01 },
>> +	{ 0x0820, 0x09 },
>> +	{ 0x0821, 0xa6 },
>> +	{ 0x0822, 0x66 },
>> +	{ 0x0823, 0x66 },
>> +};
>> +
>> +static const struct imx258_reg mipi_1267mbps_19_2mhz_4l[] = {
>>  	{ 0x0136, 0x13 },
>>  	{ 0x0137, 0x33 },
>>  	{ 0x0301, 0x05 },
>> @@ -126,16 +158,18 @@ static const struct imx258_reg mipi_1267mbps_19_2mhz[] = {
>>  	{ 0x030E, 0x00 },
>>  	{ 0x030F, 0xD8 },
>>  	{ 0x0310, 0x00 },
>> +
>> +	{ 0x0114, 0x03 },
>>  	{ 0x0820, 0x13 },
>>  	{ 0x0821, 0x4C },
>>  	{ 0x0822, 0xCC },
>>  	{ 0x0823, 0xCC },
>>  };
>>  
>> -static const struct imx258_reg mipi_1272mbps_24mhz[] = {
>> +static const struct imx258_reg mipi_1272mbps_24mhz_2l[] = {
>>  	{ 0x0136, 0x18 },
>>  	{ 0x0137, 0x00 },
>> -	{ 0x0301, 0x05 },
>> +	{ 0x0301, 0x0a },
>>  	{ 0x0303, 0x02 },
>>  	{ 0x0305, 0x04 },
>>  	{ 0x0306, 0x00 },
>> @@ -146,13 +180,59 @@ static const struct imx258_reg mipi_1272mbps_24mhz[] = {
>>  	{ 0x030E, 0x00 },
>>  	{ 0x030F, 0xD8 },
>>  	{ 0x0310, 0x00 },
>> +
>> +	{ 0x0114, 0x01 },
>>  	{ 0x0820, 0x13 },
>>  	{ 0x0821, 0x4C },
>>  	{ 0x0822, 0xCC },
>>  	{ 0x0823, 0xCC },
>>  };
>>  
>> -static const struct imx258_reg mipi_640mbps_19_2mhz[] = {
>> +static const struct imx258_reg mipi_1272mbps_24mhz_4l[] = {
>> +	{ 0x0136, 0x18 },
>> +	{ 0x0137, 0x00 },
>> +	{ 0x0301, 0x05 },
>> +	{ 0x0303, 0x02 },
>> +	{ 0x0305, 0x04 },
>> +	{ 0x0306, 0x00 },
>> +	{ 0x0307, 0xD4 },
>> +	{ 0x0309, 0x0A },
>> +	{ 0x030B, 0x01 },
>> +	{ 0x030D, 0x02 },
>> +	{ 0x030E, 0x00 },
>> +	{ 0x030F, 0xD8 },
>> +	{ 0x0310, 0x00 },
>> +
>> +	{ 0x0114, 0x03 },
>> +	{ 0x0820, 0x13 },
>> +	{ 0x0821, 0xE0 },
>> +	{ 0x0822, 0x00 },
>> +	{ 0x0823, 0x00 },
>> +};
>> +
>> +static const struct imx258_reg mipi_640mbps_19_2mhz_2l[] = {
>> +	{ 0x0136, 0x13 },
>> +	{ 0x0137, 0x33 },
>> +	{ 0x0301, 0x05 },
>> +	{ 0x0303, 0x02 },
>> +	{ 0x0305, 0x03 },
>> +	{ 0x0306, 0x00 },
>> +	{ 0x0307, 0x64 },
>> +	{ 0x0309, 0x0A },
>> +	{ 0x030B, 0x01 },
>> +	{ 0x030D, 0x02 },
>> +	{ 0x030E, 0x00 },
>> +	{ 0x030F, 0xD8 },
>> +	{ 0x0310, 0x00 },
>> +
>> +	{ 0x0114, 0x01 },
>> +	{ 0x0820, 0x05 },
>> +	{ 0x0821, 0x00 },
>> +	{ 0x0822, 0x00 },
>> +	{ 0x0823, 0x00 },
>> +};
>> +
>> +static const struct imx258_reg mipi_640mbps_19_2mhz_4l[] = {
>>  	{ 0x0136, 0x13 },
>>  	{ 0x0137, 0x33 },
>>  	{ 0x0301, 0x05 },
>> @@ -166,13 +246,37 @@ static const struct imx258_reg mipi_640mbps_19_2mhz[] = {
>>  	{ 0x030E, 0x00 },
>>  	{ 0x030F, 0xD8 },
>>  	{ 0x0310, 0x00 },
>> +
>> +	{ 0x0114, 0x03 },
>> +	{ 0x0820, 0x0A },
>> +	{ 0x0821, 0x00 },
>> +	{ 0x0822, 0x00 },
>> +	{ 0x0823, 0x00 },
>> +};
>> +
>> +static const struct imx258_reg mipi_642mbps_24mhz_2l[] = {
>> +	{ 0x0136, 0x18 },
>> +	{ 0x0137, 0x00 },
>> +	{ 0x0301, 0x0A },
>> +	{ 0x0303, 0x02 },
>> +	{ 0x0305, 0x04 },
>> +	{ 0x0306, 0x00 },
>> +	{ 0x0307, 0x6B },
>> +	{ 0x0309, 0x0A },
>> +	{ 0x030B, 0x01 },
>> +	{ 0x030D, 0x02 },
>> +	{ 0x030E, 0x00 },
>> +	{ 0x030F, 0xD8 },
>> +	{ 0x0310, 0x00 },
>> +
>> +	{ 0x0114, 0x01 },
>>  	{ 0x0820, 0x0A },
>>  	{ 0x0821, 0x00 },
>>  	{ 0x0822, 0x00 },
>>  	{ 0x0823, 0x00 },
>>  };
>>  
>> -static const struct imx258_reg mipi_642mbps_24mhz[] = {
>> +static const struct imx258_reg mipi_642mbps_24mhz_4l[] = {
>>  	{ 0x0136, 0x18 },
>>  	{ 0x0137, 0x00 },
>>  	{ 0x0301, 0x05 },
>> @@ -186,6 +290,8 @@ static const struct imx258_reg mipi_642mbps_24mhz[] = {
>>  	{ 0x030E, 0x00 },
>>  	{ 0x030F, 0xD8 },
>>  	{ 0x0310, 0x00 },
>> +
>> +	{ 0x0114, 0x03 },
>>  	{ 0x0820, 0x0A },
>>  	{ 0x0821, 0x00 },
>>  	{ 0x0822, 0x00 },
>> @@ -240,7 +346,6 @@ static const struct imx258_reg mode_common_regs[] = {
>>  	{ 0x5F05, 0xED },
>>  	{ 0x0112, 0x0A },
>>  	{ 0x0113, 0x0A },
>> -	{ 0x0114, 0x03 },
>>  	{ 0x0342, 0x14 },
>>  	{ 0x0343, 0xE8 },
>>  	{ 0x0344, 0x00 },
>> @@ -359,11 +464,13 @@ enum {
>>  
>>  /*
>>   * pixel_rate = link_freq * data-rate * nr_of_lanes / bits_per_sample
>> - * data rate => double data rate; number of lanes => 4; bits per pixel => 10
>> + * data rate => double data rate;
>> + * number of lanes => (configurable 2 or 4);
>> + * bits per pixel => 10
>>   */
>> -static u64 link_freq_to_pixel_rate(u64 f)
>> +static u64 link_freq_to_pixel_rate(u64 f, unsigned int nlanes)
>>  {
>> -	f *= 2 * 4;
>> +	f *= 2 * nlanes;
>>  	do_div(f, 10);
>>  
>>  	return f;
>> @@ -393,15 +500,27 @@ static const struct imx258_link_freq_config link_freq_configs_19_2[] = {
>>  	[IMX258_LINK_FREQ_1267MBPS] = {
>>  		.pixels_per_line = IMX258_PPL_DEFAULT,
>>  		.reg_list = {
>> -			.num_of_regs = ARRAY_SIZE(mipi_1267mbps_19_2mhz),
>> -			.regs = mipi_1267mbps_19_2mhz,
>> +			[IMX258_2_LANE_MODE] = {
>> +				.num_of_regs = ARRAY_SIZE(mipi_1267mbps_19_2mhz_2l),
>> +				.regs = mipi_1267mbps_19_2mhz_2l,
>> +			},
>> +			[IMX258_4_LANE_MODE] = {
>> +				.num_of_regs = ARRAY_SIZE(mipi_1267mbps_19_2mhz_4l),
>> +				.regs = mipi_1267mbps_19_2mhz_4l,
>> +			},
>>  		}
>>  	},
>>  	[IMX258_LINK_FREQ_640MBPS] = {
>>  		.pixels_per_line = IMX258_PPL_DEFAULT,
>>  		.reg_list = {
>> -			.num_of_regs = ARRAY_SIZE(mipi_640mbps_19_2mhz),
>> -			.regs = mipi_640mbps_19_2mhz,
>> +			[IMX258_2_LANE_MODE] = {
>> +				.num_of_regs = ARRAY_SIZE(mipi_640mbps_19_2mhz_2l),
>> +				.regs = mipi_640mbps_19_2mhz_2l,
>> +			},
>> +			[IMX258_4_LANE_MODE] = {
>> +				.num_of_regs = ARRAY_SIZE(mipi_640mbps_19_2mhz_4l),
>> +				.regs = mipi_640mbps_19_2mhz_4l,
>> +			},
>>  		}
>>  	},
>>  };
>> @@ -410,15 +529,27 @@ static const struct imx258_link_freq_config link_freq_configs_24[] = {
>>  	[IMX258_LINK_FREQ_1267MBPS] = {
>>  		.pixels_per_line = IMX258_PPL_DEFAULT,
>>  		.reg_list = {
>> -			.num_of_regs = ARRAY_SIZE(mipi_1272mbps_24mhz),
>> -			.regs = mipi_1272mbps_24mhz,
>> +			[IMX258_2_LANE_MODE] = {
>> +				.num_of_regs = ARRAY_SIZE(mipi_1272mbps_24mhz_2l),
>> +				.regs = mipi_1272mbps_24mhz_2l,
>> +			},
>> +			[IMX258_4_LANE_MODE] = {
>> +				.num_of_regs = ARRAY_SIZE(mipi_1272mbps_24mhz_4l),
>> +				.regs = mipi_1272mbps_24mhz_4l,
>> +			},
>>  		}
>>  	},
>>  	[IMX258_LINK_FREQ_640MBPS] = {
>>  		.pixels_per_line = IMX258_PPL_DEFAULT,
>>  		.reg_list = {
>> -			.num_of_regs = ARRAY_SIZE(mipi_642mbps_24mhz),
>> -			.regs = mipi_642mbps_24mhz,
>> +			[IMX258_2_LANE_MODE] = {
>> +				.num_of_regs = ARRAY_SIZE(mipi_642mbps_24mhz_2l),
>> +				.regs = mipi_642mbps_24mhz_2l,
>> +			},
>> +			[IMX258_4_LANE_MODE] = {
>> +				.num_of_regs = ARRAY_SIZE(mipi_642mbps_24mhz_4l),
>> +				.regs = mipi_642mbps_24mhz_4l,
>> +			},
>>  		}
>>  	},
>>  };
>> @@ -477,6 +608,7 @@ struct imx258 {
>>  
>>  	const struct imx258_link_freq_config *link_freq_configs;
>>  	const s64 *link_freq_menu_items;
>> +	unsigned int nlanes;
>>  
>>  	/*
>>  	 * Mutex for serialized access:
>> @@ -782,7 +914,7 @@ static int imx258_set_pad_format(struct v4l2_subdev *sd,
>>  		__v4l2_ctrl_s_ctrl(imx258->link_freq, mode->link_freq_index);
>>  
>>  		link_freq = imx258->link_freq_menu_items[mode->link_freq_index];
>> -		pixel_rate = link_freq_to_pixel_rate(link_freq);
>> +		pixel_rate = link_freq_to_pixel_rate(link_freq, imx258->nlanes);
>>  		__v4l2_ctrl_s_ctrl_int64(imx258->pixel_rate, pixel_rate);
>>  		/* Update limits and set FPS to default */
>>  		vblank_def = imx258->cur_mode->vts_def -
>> @@ -811,11 +943,13 @@ static int imx258_start_streaming(struct imx258 *imx258)
>>  {
>>  	struct i2c_client *client = v4l2_get_subdevdata(&imx258->sd);
>>  	const struct imx258_reg_list *reg_list;
>> +	const struct imx258_link_freq_config *link_freq_cfg;
>>  	int ret, link_freq_index;
>>  
>>  	/* Setup PLL */
>>  	link_freq_index = imx258->cur_mode->link_freq_index;
>> -	reg_list = &imx258->link_freq_configs[link_freq_index].reg_list;
>> +	link_freq_cfg = &imx258->link_freq_configs[link_freq_index];
>> +	reg_list = &link_freq_cfg->reg_list[imx258->nlanes == 2 ? 0 : 1];
>>  	ret = imx258_write_regs(imx258, reg_list->regs, reg_list->num_of_regs);
>>  	if (ret) {
>>  		dev_err(&client->dev, "%s failed to set plls\n", __func__);
>> @@ -1033,9 +1167,11 @@ static int imx258_init_controls(struct imx258 *imx258)
>>  		vflip->flags |= V4L2_CTRL_FLAG_READ_ONLY;
>>  
>>  	pixel_rate_max =
>> -		link_freq_to_pixel_rate(imx258->link_freq_menu_items[0]);
>> +		link_freq_to_pixel_rate(imx258->link_freq_menu_items[0],
>> +					imx258->nlanes);
>>  	pixel_rate_min =
>> -		link_freq_to_pixel_rate(imx258->link_freq_menu_items[1]);
>> +		link_freq_to_pixel_rate(imx258->link_freq_menu_items[1],
>> +					imx258->nlanes);
>>  	/* By default, PIXEL_RATE is read only */
>>  	imx258->pixel_rate = v4l2_ctrl_new_std(ctrl_hdlr, &imx258_ctrl_ops,
>>  				V4L2_CID_PIXEL_RATE,
>> @@ -1132,6 +1268,10 @@ static int imx258_get_regulators(struct imx258 *imx258,
>>  static int imx258_probe(struct i2c_client *client)
>>  {
>>  	struct imx258 *imx258;
>> +	struct fwnode_handle *endpoint;
>> +	struct v4l2_fwnode_endpoint ep = {
>> +		.bus_type = V4L2_MBUS_CSI2_DPHY
>> +	};
>>  	int ret;
>>  	u32 val = 0;
>>  
>> @@ -1172,13 +1312,35 @@ static int imx258_probe(struct i2c_client *client)
>>  		return -EINVAL;
>>  	}
>>  
>> +	endpoint = fwnode_graph_get_next_endpoint(dev_fwnode(&client->dev), NULL);
>> +	if (!endpoint) {
>> +		dev_err(&client->dev, "Endpoint node not found\n");
>> +		return -EINVAL;
>> +	}
>> +
>> +	ret = v4l2_fwnode_endpoint_alloc_parse(endpoint, &ep);
> 
> Here you're obtaining the list of supported link frequencies from the
> firmware but it is not validated (nor it was validated by the driver
> previously). I'd regard that a driver bug but fixing it at this point could
> introduce adverse effects elsewhere.
> 
> I think what I'd do here is that I'd ignore the issue if there are no
> frequencies defined for the endpoint but if there are, then enable only
> those that are listed in the endpoint.
> 
> Could you add a patch to do this, please? v4l2_link_freq_to_bitmap() has
> been recently added to facilitate this.
> 

I can give this a try, it would be similar to this patch that you submitted
earlier for the imx319 here
https://github.com/torvalds/linux/commit/726a09c1b6890887b7388745a26c8e93867780ca
right? 

>> +	fwnode_handle_put(endpoint);
>> +	if (ret) {
>> +		dev_err(&client->dev, "Parsing endpoint node failed\n");
>> +		return ret;
>> +	}
>> +
>> +	/* Get number of data lanes */
>> +	imx258->nlanes = ep.bus.mipi_csi2.num_data_lanes;
>> +	if (imx258->nlanes != 2 && imx258->nlanes != 4) {
>> +		dev_err(&client->dev, "Invalid data lanes: %u\n",
>> +			imx258->nlanes);
>> +		ret = -EINVAL;
>> +		goto error_endpoint_free;
>> +	}
>> +
>>  	/* Initialize subdev */
>>  	v4l2_i2c_subdev_init(&imx258->sd, client, &imx258_subdev_ops);
>>  
>>  	/* Will be powered off via pm_runtime_idle */
>>  	ret = imx258_power_on(&client->dev);
>>  	if (ret)
>> -		return ret;
>> +		goto error_endpoint_free;
>>  
>>  	/* Check module identity */
>>  	ret = imx258_identify_module(imx258);
>> @@ -1211,6 +1373,7 @@ static int imx258_probe(struct i2c_client *client)
>>  	pm_runtime_set_active(&client->dev);
>>  	pm_runtime_enable(&client->dev);
>>  	pm_runtime_idle(&client->dev);
>> +	v4l2_fwnode_endpoint_free(&ep);
>>  
>>  	return 0;
>>  
>> @@ -1223,6 +1386,9 @@ static int imx258_probe(struct i2c_client *client)
>>  error_identify:
>>  	imx258_power_off(&client->dev);
>>  
>> +error_endpoint_free:
>> +	v4l2_fwnode_endpoint_free(&ep);
>> +
>>  	return ret;
>>  }
>>  
> 





[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux