Hi Laurent
On Wed, 27 Mar 2024 at 00:05, Laurent Pinchart
<laurent.pinchart@xxxxxxxxxxxxxxxx> wrote:
>
> Add a fixed regulator to model the power supply to the camera connector.
As with the I2C0 mux stuff, this ideally wants to be generic rather
than 2711 only, but I'm happy to get it merged for Pi4 first and then
add the others.
Reviewed-by: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
> Signed-off-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
> ---
> arch/arm/boot/dts/broadcom/bcm2711-rpi-4-b.dts | 7 +++++++
> 1 file changed, 7 insertions(+)
>
> diff --git a/arch/arm/boot/dts/broadcom/bcm2711-rpi-4-b.dts b/arch/arm/boot/dts/broadcom/bcm2711-rpi-4-b.dts
> index d5f8823230db..cfc8cb5e10ba 100644
> --- a/arch/arm/boot/dts/broadcom/bcm2711-rpi-4-b.dts
> +++ b/arch/arm/boot/dts/broadcom/bcm2711-rpi-4-b.dts
> @@ -15,6 +15,13 @@ chosen {
> stdout-path = "serial1:115200n8";
> };
>
> + cam1_reg: regulator-cam1 {
> + compatible = "regulator-fixed";
> + regulator-name = "cam1-reg";
> + enable-active-high;
> + gpio = <&expgpio 5 GPIO_ACTIVE_HIGH>;
> + };
> +
> sd_io_1v8_reg: regulator-sd-io-1v8 {
> compatible = "regulator-gpio";
> regulator-name = "vdd-sd-io";
> --
> Regards,
>
> Laurent Pinchart
>
