The driver dug the supported link frequency up from the V4L2 fwnode
endpoint and used it internally, but failed to report this in the
LINK_FREQ and PIXEL_RATE controls. Fix this.
Fixes: 0677a2d9b735 ("media: ov2740: Add support for 180 MHz link frequency")
Cc: stable@xxxxxxxxxxxxxxx # for v6.8 and later
Signed-off-by: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
---
drivers/media/i2c/ov2740.c | 11 ++++++-----
1 file changed, 6 insertions(+), 5 deletions(-)
diff --git a/drivers/media/i2c/ov2740.c b/drivers/media/i2c/ov2740.c
index 552935ccb4a9..57906df7be4e 100644
--- a/drivers/media/i2c/ov2740.c
+++ b/drivers/media/i2c/ov2740.c
@@ -768,14 +768,15 @@ static int ov2740_init_controls(struct ov2740 *ov2740)
cur_mode = ov2740->cur_mode;
size = ARRAY_SIZE(link_freq_menu_items);
- ov2740->link_freq = v4l2_ctrl_new_int_menu(ctrl_hdlr, &ov2740_ctrl_ops,
- V4L2_CID_LINK_FREQ,
- size - 1, 0,
- link_freq_menu_items);
+ ov2740->link_freq =
+ v4l2_ctrl_new_int_menu(ctrl_hdlr, &ov2740_ctrl_ops,
+ V4L2_CID_LINK_FREQ, size - 1,
+ ov2740->supported_modes->link_freq_index,
+ link_freq_menu_items);
if (ov2740->link_freq)
ov2740->link_freq->flags |= V4L2_CTRL_FLAG_READ_ONLY;
- pixel_rate = to_pixel_rate(OV2740_LINK_FREQ_360MHZ_INDEX);
+ pixel_rate = to_pixel_rate(ov2740->supported_modes->link_freq_index);
ov2740->pixel_rate = v4l2_ctrl_new_std(ctrl_hdlr, &ov2740_ctrl_ops,
V4L2_CID_PIXEL_RATE, 0,
pixel_rate, 1, pixel_rate);
--
2.39.2
