Re: [RFC PATCH net-next v6 00/15] Device Memory TCP

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 2024/3/26 8:28, Mina Almasry wrote:
> On Tue, Mar 5, 2024 at 11:38 AM Mina Almasry <almasrymina@xxxxxxxxxx> wrote:
>>
>> On Tue, Mar 5, 2024 at 4:54 AM Yunsheng Lin <linyunsheng@xxxxxxxxxx> wrote:
>>>
>>> On 2024/3/5 10:01, Mina Almasry wrote:
>>>
>>> ...
>>>
>>>>
>>>> Perf - page-pool benchmark:
>>>> ---------------------------
>>>>
>>>> bench_page_pool_simple.ko tests with and without these changes:
>>>> https://pastebin.com/raw/ncHDwAbn
>>>>
>>>> AFAIK the number that really matters in the perf tests is the
>>>> 'tasklet_page_pool01_fast_path Per elem'. This one measures at about 8
>>>> cycles without the changes but there is some 1 cycle noise in some
>>>> results.
>>>>
>>>> With the patches this regresses to 9 cycles with the changes but there
>>>> is 1 cycle noise occasionally running this test repeatedly.
>>>>
>>>> Lastly I tried disable the static_branch_unlikely() in
>>>> netmem_is_net_iov() check. To my surprise disabling the
>>>> static_branch_unlikely() check reduces the fast path back to 8 cycles,
>>>> but the 1 cycle noise remains.
>>>>
>>>
>>> The last sentence seems to be suggesting the above 1 ns regresses is caused
>>> by the static_branch_unlikely() checking?
>>
>> Note it's not a 1ns regression, it's looks like maybe a 1 cycle
>> regression (slightly less than 1ns if I'm reading the output of the
>> test correctly):
>>
>> # clean net-next
>> time_bench: Type:tasklet_page_pool01_fast_path Per elem: 8 cycles(tsc)
>> 2.993 ns (step:0)
>>
>> # with patches
>> time_bench: Type:tasklet_page_pool01_fast_path Per elem: 9 cycles(tsc)
>> 3.679 ns (step:0)
>>
>> # with patches and with diff that disables static branching:
>> time_bench: Type:tasklet_page_pool01_fast_path Per elem: 8 cycles(tsc)
>> 3.248 ns (step:0)
>>
>> I do see noise in the test results between run and run, and any
>> regression (if any) is slightly obfuscated by the noise, so it's a bit
>> hard to make confident statements. So far it looks like a ~0.25ns
>> regression without static branch and about ~0.65ns with static branch.
>>
>> Honestly when I saw all 3 results were within some noise I did not
>> investigate more, but if this looks concerning to you I can dig
>> further. I likely need to gather a few test runs to filter out the
>> noise and maybe investigate the assembly my compiler is generating to
>> maybe narrow down what changes there.
>>
> 
> I did some more investigation here to gather more data to filter out
> the noise, and recorded the summary here:
> 
> https://pastebin.com/raw/v5dYRg8L
> 
> Long story short, the page_pool benchmark results are consistent with
> some outlier noise results that I'm discounting here. Currently
> page_pool fast path is at 8 cycles
> 
> [ 2115.724510] time_bench: Type:tasklet_page_pool01_fast_path Per
> elem: 8 cycles(tsc) 3.187 ns (step:0) - (measurement period
> time:0.031870585 sec time_interval:31870585) - (invoke count:10000000
> tsc_interval:86043192)
> 
> and with this patch series it degrades to 10 cycles, or about a 0.7ns
> degradation or so:

Even if the absolute value for the overhead is small, we seems have a
degradation of about 20% for tasklet_page_pool01_fast_path testcase,
which seems scary.

I am assuming that every page is recyclable for tasklet_page_pool01_fast_path
testcase, and that code path matters for page_pool, it would be good to
remove any additional checking for that code path.

And we already have pool->has_init_callback checking when we have to use
a new page, it may make sense to refactor that to share the same checking
for provider to avoid the overhead as much as possible.

Also, I am not sure if it really matter that much, as with the introducing
of netmem_is_net_iov() checking spreading in the networking, the overhead
might add up for other case too.

> 
> [  498.226127] time_bench: Type:tasklet_page_pool01_fast_path Per
> elem: 10 cycles(tsc) 3.944 ns (step:0) - (measurement period
> time:0.039442539 sec time_interval:39442539) - (invoke count:10000000
> tsc_interval:106485268)
> 
> I took the time to dig into where the degradation comes from, and to
> my surprise we can shave off 1 cycle in perf by removing the
> static_branch_unlikely check in netmem_is_net_iov() like so:
> 
> diff --git a/include/net/netmem.h b/include/net/netmem.h
> index fe354d11a421..2b4310ac1115 100644
> --- a/include/net/netmem.h
> +++ b/include/net/netmem.h
> @@ -122,8 +122,7 @@ typedef unsigned long __bitwise netmem_ref;
>  static inline bool netmem_is_net_iov(const netmem_ref netmem)
>  {
>  #ifdef CONFIG_PAGE_POOL
> -       return static_branch_unlikely(&page_pool_mem_providers) &&
> -              (__force unsigned long)netmem & NET_IOV;
> +       return (__force unsigned long)netmem & NET_IOV;
>  #else
>         return false;
>  #endif
> 
> With this change, the fast path is 9 cycles, only  a 1 cycle (~0.35ns)
> regression:
> 
> [  199.184429] time_bench: Type:tasklet_page_pool01_fast_path Per
> elem: 9 cycles(tsc) 3.552 ns (step:0) - (measurement period
> time:0.035524013 sec time_interval:35524013) - (invoke count:10000000
> tsc_interval:95907775)
> 
> I did some digging with YiFei on why the static_branch_unlikely
> appears to be causing a 1 cycle regression, but could not get an
> answer that makes sense. The # of instructions in
> page_pool_return_page() with the static_branch_unlikely and without is
> about the same in the compiled .o file, and my understanding is that
> static_branch will cause code re-writing anyway so looking at the
> compiled code may not be representative.
> 
> Worthy of note is that I get ~95% line rate of devmem TCP regardless
> of the static_branch_unlikely() or not, so impact of the static_branch
> is not large enough to be measurable end-to-end. I'm thinking I want
> to drop the static_branch_unlikely() in the next RFC since it doesn't
> improve the end-to-end throughput number and is resulting in a
> measurable improvement in the page pool benchmark.
> 




[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux