Hi Laurent,
Am Montag, 25. März 2024, 21:49:24 CET schrieb Laurent Pinchart:
> Hi Alexander,
>
> On Mon, Mar 25, 2024 at 04:52:21PM +0100, Alexander Stein wrote:
> > Am Montag, 25. März 2024, 16:13:39 CET schrieb Laurent Pinchart:
> > > From: Paul Elder <paul.elder@xxxxxxxxxxxxxxxx>
> > >
> > > The ISP supports both CSI and parallel interfaces, where port 0
> > > corresponds to the former and port 1 corresponds to the latter. Since
> > > the i.MX8MP's ISPs are connected by the parallel interface to the CSI
> > > receiver, set them both to port 1.
> > >
> > > Signed-off-by: Paul Elder <paul.elder@xxxxxxxxxxxxxxxx>
> > > Signed-off-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
> > > ---
> > > Changes since v1:
> > >
> > > - Fix clock ordering
> > > - Add #address-cells and #size-cells to ports nodes
> > > ---
> > > arch/arm64/boot/dts/freescale/imx8mp.dtsi | 50 +++++++++++++++++++++++
> > > 1 file changed, 50 insertions(+)
> > >
> > > diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> > > index bfc5c81a5bd4..1d2670b91b53 100644
> > > --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> > > +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> > > @@ -1616,6 +1616,56 @@ isi_in_1: endpoint {
> > > };
> > > };
> > >
> > > + isp_0: isp@32e10000 {
> > > + compatible = "fsl,imx8mp-isp";
> > > + reg = <0x32e10000 0x10000>;
> > > + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
> > > + clocks = <&clk IMX8MP_CLK_MEDIA_ISP_ROOT>,
> > > + <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>,
> > > + <&clk IMX8MP_CLK_MEDIA_APB_ROOT>;
> > > + clock-names = "isp", "aclk", "hclk";
> > > + assigned-clocks = <&clk IMX8MP_CLK_MEDIA_ISP>;
> > > + assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_500M>;
> > > + assigned-clock-rates = <500000000>;
> > > + power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_ISP>;
> > > + fsl,blk-ctrl = <&media_blk_ctrl 0>;
> > > + status = "disabled";
> > > +
> > > + ports {
> > > + #address-cells = <1>;
> > > + #size-cells = <0>;
> > > +
> > > + port@1 {
> > > + reg = <1>;
> > > + };
> > > + };
> > > + };
> > > +
> > > + isp_1: isp@32e20000 {
> > > + compatible = "fsl,imx8mp-isp";
> > > + reg = <0x32e20000 0x10000>;
> > > + interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
> > > + clocks = <&clk IMX8MP_CLK_MEDIA_ISP_ROOT>,
> > > + <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>,
> > > + <&clk IMX8MP_CLK_MEDIA_APB_ROOT>;
> > > + clock-names = "isp", "aclk", "hclk";
> > > + assigned-clocks = <&clk IMX8MP_CLK_MEDIA_ISP>;
> > > + assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_500M>;
> > > + assigned-clock-rates = <500000000>;
> > > + power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_ISP>;
> > > + fsl,blk-ctrl = <&media_blk_ctrl 1>;
> > > + status = "disabled";
> > > +
> > > + ports {
> > > + #address-cells = <1>;
> > > + #size-cells = <0>;
> > > +
> > > + port@1 {
> > > + reg = <1>;
> > > + };
> > > + };
> > > + };
> > > +
> >
> > The patch itself is okay. But you might not be able to
> > configure the parent of IMX8MP_CLK_MEDIA_ISP if dewarp is enabled before.
> > This is due to IMX8MP_CLK_MEDIA_ISP_ROOT being enabled in 'pgc_ispdwp'
> > power domain. Reparenting is not possible anymore in this case.
>
> Good point.
>
> > Something like
> > ---8<---
> > --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> > +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> > @@ -1837,11 +1837,13 @@ media_blk_ctrl: blk-ctrl@32ec0000 {
> > <&clk IMX8MP_CLK_MEDIA_APB>,
> > <&clk IMX8MP_CLK_MEDIA_DISP1_PIX>,
> > <&clk IMX8MP_CLK_MEDIA_DISP2_PIX>,
> > + <&clk IMX8MP_CLK_MEDIA_ISP>,
> > <&clk IMX8MP_VIDEO_PLL1>;
> > assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_1000M>,
> > <&clk IMX8MP_SYS_PLL1_800M>,
> > <&clk IMX8MP_VIDEO_PLL1_OUT>,
> > - <&clk IMX8MP_VIDEO_PLL1_OUT>;
> > + <&clk IMX8MP_VIDEO_PLL1_OUT>,
> > + <&clk IMX8MP_SYS_PLL2_500M>;
> > assigned-clock-rates = <500000000>, <200000000>,
> > <0>, <0>, <1039500000>;
>
> With an assigned clock rate here too then ?
You are right. This posted diff is what I was using for a while now though.
Apparently the clock frequency was still correct.
Best regards,
Alexander
> > #power-domain-cells = <1>;
> > ---8<---
> > is needed.
>
> Sascha, are you OK with this approach ?
>
> > > dewarp: dwe@32e30000 {
> > > compatible = "nxp,imx8mp-dw100";
> > > reg = <0x32e30000 0x10000>;
> > >
> > > base-commit: 4cece764965020c22cff7665b18a012006359095
>
>
--
TQ-Systems GmbH | Mühlstraße 2, Gut Delling | 82229 Seefeld, Germany
Amtsgericht München, HRB 105018
Geschäftsführer: Detlef Schneider, Rüdiger Stahl, Stefan Schneider
http://www.tq-group.com/
