Re: [PATCH v2 8/8] media: qcom: camss: Add sm8550 support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Bryan,

On 3/21/2024 12:01 AM, Bryan O'Donoghue wrote:
On 20/03/2024 14:11, Depeng Shao wrote:
Add in functional logic throughout the code to support the SM8550.

Signed-off-by: Depeng Shao <quic_depengs@xxxxxxxxxxx>
---
  .../media/platform/qcom/camss/camss-csid.c    | 19 +++++++++++++++++++
  .../media/platform/qcom/camss/camss-csiphy.c  |  1 +
  drivers/media/platform/qcom/camss/camss-vfe.c |  7 +++++++
  .../media/platform/qcom/camss/camss-video.c   |  1 +
  4 files changed, 28 insertions(+)

diff --git a/drivers/media/platform/qcom/camss/camss-csid.c b/drivers/media/platform/qcom/camss/camss-csid.c
index eb27d69e89a1..e9203dc15798 100644
--- a/drivers/media/platform/qcom/camss/camss-csid.c
+++ b/drivers/media/platform/qcom/camss/camss-csid.c
@@ -590,6 +590,25 @@ int msm_csid_subdev_init(struct camss *camss, struct csid_device *csid,               csid->base = camss->vfe[id].base + VFE_480_LITE_CSID_OFFSET;
          else
              csid->base = camss->vfe[id].base + VFE_480_CSID_OFFSET;
+    } else if (camss->res->version == CAMSS_8550) {
+        /* for titan 780, CSID lite registers are inside the VFE lite region,
+         * between the VFE "top" and "bus" registers. this requires
+         * VFE to be initialized before CSID
+         */
+        if (id >= 2)
+            csid->base = camss->vfe[id].base;

Hard-coded magic numbers are definitely out.

If you need to differentiate - please include something in the struct resources so that the flag is always available and we don't have to start doing funky magic index/magic number gymnastics.


Sure, will update this part.

+        else {
+            csid->base =
+                devm_platform_ioremap_resource_byname(pdev, res->reg[0]);
+            if (id != 0)
+                csid->top_base = camss->csid[0].top_base;
+            else
+                csid->top_base =
+                    devm_platform_ioremap_resource_byname(pdev, res->reg[1]);
+        }

What is the point of hooking the TOP base just to clear our the status registers ?

We take no meaningful action in the ISR that I can see.


The csid top is a new small hardware block, it controls the output of CSID, since the CSID can connect to Sensor Front End(SFE) or original VFE in CSID gen3.


+
+        if (IS_ERR(csid->base))
+            return PTR_ERR(csid->base);
      } else {
          csid->base = devm_platform_ioremap_resource_byname(pdev, res->reg[0]);
          if (IS_ERR(csid->base))
diff --git a/drivers/media/platform/qcom/camss/camss-csiphy.c b/drivers/media/platform/qcom/camss/camss-csiphy.c
index 45b3a8e5dea4..f35af0dd2147 100644
--- a/drivers/media/platform/qcom/camss/camss-csiphy.c
+++ b/drivers/media/platform/qcom/camss/camss-csiphy.c
@@ -579,6 +579,7 @@ int msm_csiphy_subdev_init(struct camss *camss,
      case CAMSS_845:
      case CAMSS_8250:
      case CAMSS_8280XP:
+    case CAMSS_8550:
          csiphy->formats = csiphy_formats_sdm845;
          csiphy->nformats = ARRAY_SIZE(csiphy_formats_sdm845);
          break;
diff --git a/drivers/media/platform/qcom/camss/camss-vfe.c b/drivers/media/platform/qcom/camss/camss-vfe.c
index d875237cf244..ff115c5521c6 100644
--- a/drivers/media/platform/qcom/camss/camss-vfe.c
+++ b/drivers/media/platform/qcom/camss/camss-vfe.c
@@ -226,6 +226,7 @@ static u32 vfe_src_pad_code(struct vfe_line *line, u32 sink_code,
      case CAMSS_845:
      case CAMSS_8250:
      case CAMSS_8280XP:
+    case CAMSS_8550:
          switch (sink_code) {
          case MEDIA_BUS_FMT_YUYV8_1X16:
          {
@@ -296,6 +297,10 @@ int vfe_reset(struct vfe_device *vfe)
      reinit_completion(&vfe->reset_complete);
+    // The reset has been moved to csid in 8550

Please run checkpatch.pl on your code before submission C++ are not allowed.

---
bod

Thanks,
Depeng




[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux