Add a fixed regulator to model the power supply to the camera connector.
Signed-off-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
---
arch/arm/boot/dts/broadcom/bcm2711-rpi-4-b.dts | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/arch/arm/boot/dts/broadcom/bcm2711-rpi-4-b.dts b/arch/arm/boot/dts/broadcom/bcm2711-rpi-4-b.dts
index d5f8823230db..cfc8cb5e10ba 100644
--- a/arch/arm/boot/dts/broadcom/bcm2711-rpi-4-b.dts
+++ b/arch/arm/boot/dts/broadcom/bcm2711-rpi-4-b.dts
@@ -15,6 +15,13 @@ chosen {
stdout-path = "serial1:115200n8";
};
+ cam1_reg: regulator-cam1 {
+ compatible = "regulator-fixed";
+ regulator-name = "cam1-reg";
+ enable-active-high;
+ gpio = <&expgpio 5 GPIO_ACTIVE_HIGH>;
+ };
+
sd_io_1v8_reg: regulator-sd-io-1v8 {
compatible = "regulator-gpio";
regulator-name = "vdd-sd-io";
--
Regards,
Laurent Pinchart
