Usage of internal pads creates a route internal to the subdev, and the
V4L2 camera sensor API requires such routes to be reported to userspace.
Create the route in the .init_state() operation.
Internal routing support requires stream support, so set the
V4L2_SUBDEV_FL_HAS_STREAMS flag and switch formats and selection
rectangles access from pads to streams. As the route is immutable,
there's no need to implement the .set_routing() operation, and we can
hardcode the sink and source stream IDs to 0.
Signed-off-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
Reviewed-by: Jacopo Mondi <jacopo.mondi@xxxxxxxxxxxxxxxx>
---
Changes since v6:
- Drop change to get format API in imx219_set_ctrl()
- Fix function name in commit message
- Set V4L2_SUBDEV_ROUTE_FL_IMMUTABLE flag on route
---
drivers/media/i2c/imx219.c | 24 +++++++++++++++++++++++-
1 file changed, 23 insertions(+), 1 deletion(-)
diff --git a/drivers/media/i2c/imx219.c b/drivers/media/i2c/imx219.c
index 817bf192e4d9..6602250834be 100644
--- a/drivers/media/i2c/imx219.c
+++ b/drivers/media/i2c/imx219.c
@@ -993,15 +993,36 @@ static int imx219_get_selection(struct v4l2_subdev *sd,
static int imx219_init_state(struct v4l2_subdev *sd,
struct v4l2_subdev_state *state)
{
+ struct v4l2_subdev_route routes[1] = {
+ {
+ .sink_pad = IMX219_PAD_IMAGE,
+ .sink_stream = 0,
+ .source_pad = IMX219_PAD_SOURCE,
+ .source_stream = 0,
+ .flags = V4L2_SUBDEV_ROUTE_FL_ACTIVE |
+ V4L2_SUBDEV_ROUTE_FL_IMMUTABLE,
+ },
+ };
+ struct v4l2_subdev_krouting routing = {
+ .len_routes = ARRAY_SIZE(routes),
+ .num_routes = ARRAY_SIZE(routes),
+ .routes = routes,
+ };
struct v4l2_subdev_format fmt = {
.which = V4L2_SUBDEV_FORMAT_TRY,
.pad = IMX219_PAD_SOURCE,
+ .stream = 0,
.format = {
.code = MEDIA_BUS_FMT_SRGGB10_1X10,
.width = supported_modes[0].width,
.height = supported_modes[0].height,
},
};
+ int ret;
+
+ ret = v4l2_subdev_set_routing(sd, state, &routing);
+ if (ret)
+ return ret;
imx219_set_pad_format(sd, state, &fmt);
@@ -1260,7 +1281,8 @@ static int imx219_probe(struct i2c_client *client)
/* Initialize subdev */
imx219->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE |
- V4L2_SUBDEV_FL_HAS_EVENTS;
+ V4L2_SUBDEV_FL_HAS_EVENTS |
+ V4L2_SUBDEV_FL_STREAMS;
imx219->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR;
/*
--
Regards,
Laurent Pinchart
