The imx335 reports a recommended pixel area of - 2592x1944.
The driver supported mode however limits it to height=1940.
Fix the height discrepency by correctly the value of height
(with updates to vblank and mode registers).
Signed-off-by: Umang Jain <umang.jain@xxxxxxxxxxxxxxxx>
---
drivers/media/i2c/imx335.c | 18 +++++++++---------
1 file changed, 9 insertions(+), 9 deletions(-)
diff --git a/drivers/media/i2c/imx335.c b/drivers/media/i2c/imx335.c
index 7609dbc537b1..10a09830dbd6 100644
--- a/drivers/media/i2c/imx335.c
+++ b/drivers/media/i2c/imx335.c
@@ -247,13 +247,13 @@ static const int imx335_tpg_val[] = {
};
/* Sensor mode registers */
-static const struct cci_reg_sequence mode_2592x1940_regs[] = {
+static const struct cci_reg_sequence mode_2592x1944_regs[] = {
{IMX335_REG_MODE_SELECT, 0x01},
{IMX335_REG_MASTER_MODE, 0x00},
- {IMX335_REG_WINMODE, 0x04},
- {IMX335_REG_HTRIMMING_START, 384},
+ {IMX335_REG_WINMODE, 0x00},
+ {IMX335_REG_HTRIMMING_START, 48},
{IMX335_REG_HNUM, 2592},
- {IMX335_REG_Y_OUT_SIZE, 1940},
+ {IMX335_REG_Y_OUT_SIZE, 1944},
{IMX335_REG_AREA3_ST_ADR_1, 176},
{IMX335_REG_AREA3_WIDTH_1, 3928},
{IMX335_REG_OPB_SIZE_V, 0},
@@ -404,15 +404,15 @@ static const u32 imx335_mbus_codes[] = {
/* Supported sensor mode configurations */
static const struct imx335_mode supported_mode = {
.width = 2592,
- .height = 1940,
+ .height = 1944,
.hblank = 342,
- .vblank = 2560,
- .vblank_min = 2560,
+ .vblank = 2556,
+ .vblank_min = 2556,
.vblank_max = 133060,
.pclk = 396000000,
.reg_list = {
- .num_of_regs = ARRAY_SIZE(mode_2592x1940_regs),
- .regs = mode_2592x1940_regs,
+ .num_of_regs = ARRAY_SIZE(mode_2592x1944_regs),
+ .regs = mode_2592x1944_regs,
},
};
--
2.43.0
