On 3/13/24 08:25, Sakari Ailus wrote:
Provide information on the frame layout using frame descriptors.
Signed-off-by: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
Reviewed-by: Julien Massot <julien.massot@xxxxxxxxxxxxx>
---
drivers/media/i2c/ccs/ccs-core.c | 60 +++++++++++++++++++++++++++++++
drivers/media/i2c/ccs/ccs-quirk.h | 7 ++++
drivers/media/i2c/ccs/ccs.h | 4 +++
3 files changed, 71 insertions(+)
diff --git a/drivers/media/i2c/ccs/ccs-core.c b/drivers/media/i2c/ccs/ccs-core.c
index 0efbc63534bc..9cc2080b73ec 100644
--- a/drivers/media/i2c/ccs/ccs-core.c
+++ b/drivers/media/i2c/ccs/ccs-core.c
@@ -25,6 +25,7 @@
#include <linux/slab.h>
#include <linux/smiapp.h>
#include <linux/v4l2-mediabus.h>
+#include <media/mipi-csi2.h>
#include <media/v4l2-cci.h>
#include <media/v4l2-device.h>
#include <media/v4l2-fwnode.h>
@@ -245,6 +246,33 @@ static int ccs_read_all_limits(struct ccs_sensor *sensor)
return ret;
}
+static u8 ccs_mipi_csi2_data_type(unsigned int bpp)
+{
+ switch (bpp) {
+ case 6:
+ return MIPI_CSI2_DT_RAW6;
+ case 7:
+ return MIPI_CSI2_DT_RAW7;
+ case 8:
+ return MIPI_CSI2_DT_RAW8;
+ case 10:
+ return MIPI_CSI2_DT_RAW10;
+ case 12:
+ return MIPI_CSI2_DT_RAW12;
+ case 14:
+ return MIPI_CSI2_DT_RAW14;
+ case 16:
+ return MIPI_CSI2_DT_RAW16;
+ case 20:
+ return MIPI_CSI2_DT_RAW20;
+ case 24:
+ return MIPI_CSI2_DT_RAW24;
+ default:
+ WARN_ON(1);
+ return 0;
+ }
+}
+
static int ccs_read_frame_fmt(struct ccs_sensor *sensor)
{
struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd);
@@ -2632,6 +2660,37 @@ static int ccs_set_selection(struct v4l2_subdev *subdev,
return ret;
}
+static int ccs_get_frame_desc(struct v4l2_subdev *subdev, unsigned int pad,
+ struct v4l2_mbus_frame_desc *desc)
+{
+ struct ccs_sensor *sensor = to_ccs_sensor(subdev);
+ struct v4l2_mbus_frame_desc_entry *entry = desc->entry;
+
+ if (ccs_has_quirk(sensor, frame_desc))
+ return ccs_call_quirk(sensor, frame_desc, desc);
+
+ switch (sensor->hwcfg.csi_signalling_mode) {
+ case CCS_CSI_SIGNALING_MODE_CSI_2_DPHY:
+ case CCS_CSI_SIGNALING_MODE_CSI_2_CPHY:
+ desc->type = V4L2_MBUS_FRAME_DESC_TYPE_CSI2;
+ break;
+ default:
+ /* FIXME: CCP2 support */
+ return -EINVAL;
+ }
+
+ entry->pixelcode = sensor->csi_format->code;
+ entry->stream = CCS_STREAM_PIXEL;
+ entry->bus.csi2.dt =
+ sensor->csi_format->width == sensor->csi_format->compressed ?
+ ccs_mipi_csi2_data_type(sensor->csi_format->compressed) :
+ CCS_DEFAULT_COMPRESSED_DT;
+ entry++;
+ desc->num_entries++;
+
+ return 0;
+}
+
static int ccs_get_skip_frames(struct v4l2_subdev *subdev, u32 *frames)
{
struct ccs_sensor *sensor = to_ccs_sensor(subdev);
@@ -3054,6 +3113,7 @@ static const struct v4l2_subdev_pad_ops ccs_pad_ops = {
.set_selection = ccs_set_selection,
.enable_streams = ccs_enable_streams,
.disable_streams = ccs_disable_streams,
+ .get_frame_desc = ccs_get_frame_desc,
};
static const struct v4l2_subdev_sensor_ops ccs_sensor_ops = {
diff --git a/drivers/media/i2c/ccs/ccs-quirk.h b/drivers/media/i2c/ccs/ccs-quirk.h
index 392c97109617..3e1d9eaa33fa 100644
--- a/drivers/media/i2c/ccs/ccs-quirk.h
+++ b/drivers/media/i2c/ccs/ccs-quirk.h
@@ -36,6 +36,7 @@ struct ccs_sensor;
* access may be done by the caller (default read
* value is zero), else negative error code on error
* @flags: Quirk flags
+ * @frame_desc: Obtain the frame descriptor
*/
struct ccs_quirk {
int (*limits)(struct ccs_sensor *sensor);
@@ -46,6 +47,8 @@ struct ccs_quirk {
int (*init)(struct ccs_sensor *sensor);
int (*reg_access)(struct ccs_sensor *sensor, bool write, u32 *reg,
u32 *val);
+ int (*frame_desc)(struct ccs_sensor *sensor,
+ struct v4l2_mbus_frame_desc *desc);
unsigned long flags;
};
@@ -62,6 +65,10 @@ struct ccs_reg_8 {
.val = _val, \
}
+#define ccs_has_quirk(sensor, _quirk) \
+ ((sensor)->minfo.quirk && \
+ (sensor)->minfo.quirk->_quirk)
+
#define ccs_call_quirk(sensor, _quirk, ...) \
((sensor)->minfo.quirk && \
(sensor)->minfo.quirk->_quirk ? \
diff --git a/drivers/media/i2c/ccs/ccs.h b/drivers/media/i2c/ccs/ccs.h
index 4725e6eca8d0..adb152366ea2 100644
--- a/drivers/media/i2c/ccs/ccs.h
+++ b/drivers/media/i2c/ccs/ccs.h
@@ -46,6 +46,8 @@
#define CCS_COLOUR_COMPONENTS 4
+#define CCS_DEFAULT_COMPRESSED_DT 0x30
+
#define SMIAPP_NAME "smiapp"
#define CCS_NAME "ccs"
@@ -175,6 +177,8 @@ struct ccs_csi_data_format {
#define CCS_PAD_SRC 1
#define CCS_PADS 2
+#define CCS_STREAM_PIXEL 0
+
struct ccs_binning_subtype {
u8 horizontal:4;
u8 vertical:4;
--
Julien Massot
Senior Software Engineer
Collabora Ltd.
Platinum Building, St John's Innovation Park, Cambridge CB4 0DS, UK
Registered in England & Wales, no. 5513718