Compute scaling configuration from sub-device state instead of storing it
to the driver's device context struct.
Signed-off-by: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
---
drivers/media/i2c/ccs/ccs-core.c | 60 ++++++++++++++++++++++----------
drivers/media/i2c/ccs/ccs.h | 3 --
2 files changed, 41 insertions(+), 22 deletions(-)
diff --git a/drivers/media/i2c/ccs/ccs-core.c b/drivers/media/i2c/ccs/ccs-core.c
index 3b80c54453cc..a147dbb9f362 100644
--- a/drivers/media/i2c/ccs/ccs-core.c
+++ b/drivers/media/i2c/ccs/ccs-core.c
@@ -547,19 +547,52 @@ ccs_get_binning(struct ccs_sensor *sensor, u8 *binning_mode, u8 *binh, u8 *binv)
*binv = binner_sink_crop->height / binner_sink_comp->height;
}
+static void ccs_get_scaling(struct ccs_sensor *sensor,
+ u8 *scaling_mode, u8 *scale_m)
+{
+ struct v4l2_subdev_state *scaler_state =
+ v4l2_subdev_get_locked_active_state(&sensor->scaler->sd);
+ struct v4l2_rect *scaler_sink_crop =
+ v4l2_subdev_state_get_crop(scaler_state, CCS_PAD_SINK,
+ CCS_STREAM_PIXEL);
+ struct v4l2_rect *scaler_sink_comp =
+ v4l2_subdev_state_get_compose(scaler_state, CCS_PAD_SINK,
+ CCS_STREAM_PIXEL);
+
+ if (scale_m)
+ *scale_m = scaler_sink_crop->width *
+ CCS_LIM(sensor, SCALER_N_MIN) /
+ scaler_sink_comp->width;
+
+ if (scaling_mode) {
+ if (scaler_sink_crop->width == scaler_sink_comp->width)
+ *scaling_mode = CCS_SCALING_MODE_NO_SCALING;
+ else if (scaler_sink_crop->height == scaler_sink_comp->height)
+ *scaling_mode = CCS_SCALING_MODE_HORIZONTAL;
+ else
+ *scaling_mode = SMIAPP_SCALING_MODE_BOTH;
+ }
+}
+
static int ccs_pll_update(struct ccs_sensor *sensor)
{
struct ccs_pll *pll = &sensor->pll;
u8 binh, binv;
+ u8 scale_m;
int rval;
ccs_get_binning(sensor, NULL, &binh, &binv);
+ if (sensor->scaler)
+ ccs_get_scaling(sensor, NULL, &scale_m);
+ else
+ scale_m = CCS_LIM(sensor, SCALER_N_MIN);
+
pll->binning_horizontal = binh;
pll->binning_vertical = binv;
pll->link_freq =
sensor->link_freq->qmenu_int[sensor->link_freq->val];
- pll->scale_m = sensor->scale_m;
+ pll->scale_m = scale_m;
pll->bits_per_pixel = sensor->csi_format->compressed;
rval = ccs_pll_try(sensor, pll);
@@ -1202,7 +1235,7 @@ static int ccs_get_mbus_formats(struct ccs_sensor *sensor)
/* Figure out which BPP values can be used with which formats. */
pll->binning_horizontal = 1;
pll->binning_vertical = 1;
- pll->scale_m = sensor->scale_m;
+ pll->scale_m = CCS_LIM(sensor, SCALER_N_MIN);
for (i = 0; i < ARRAY_SIZE(ccs_csi_data_formats); i++) {
sensor->compressed_min_bpp =
@@ -1950,11 +1983,15 @@ static int ccs_enable_streams(struct v4l2_subdev *subdev,
/* Scaling */
if (CCS_LIM(sensor, SCALING_CAPABILITY)
!= CCS_SCALING_CAPABILITY_NONE) {
- rval = ccs_write(sensor, SCALING_MODE, sensor->scaling_mode);
+ u8 scaling_mode, scale_m;
+
+ ccs_get_scaling(sensor, &scaling_mode, &scale_m);
+
+ rval = ccs_write(sensor, SCALING_MODE, scaling_mode);
if (rval < 0)
goto err_pm_put;
- rval = ccs_write(sensor, SCALE_M, sensor->scale_m);
+ rval = ccs_write(sensor, SCALE_M, scale_m);
if (rval < 0)
goto err_pm_put;
}
@@ -2270,7 +2307,6 @@ static void ccs_propagate(struct v4l2_subdev *subdev,
struct v4l2_subdev_state *sd_state, int which,
int target)
{
- struct ccs_sensor *sensor = to_ccs_sensor(subdev);
struct ccs_subdev *ssd = to_ccs_subdev(subdev);
struct v4l2_rect *comp, *crop;
struct v4l2_mbus_framefmt *fmt;
@@ -2283,13 +2319,6 @@ static void ccs_propagate(struct v4l2_subdev *subdev,
CCS_STREAM_PIXEL);
comp->width = crop->width;
comp->height = crop->height;
- if (which == V4L2_SUBDEV_FORMAT_ACTIVE) {
- if (ssd == sensor->scaler) {
- sensor->scale_m = CCS_LIM(sensor, SCALER_N_MIN);
- sensor->scaling_mode =
- CCS_SCALING_MODE_NO_SCALING;
- }
- }
fallthrough;
case V4L2_SEL_TGT_COMPOSE:
crop = v4l2_subdev_state_get_crop(sd_state, CCS_PAD_SRC,
@@ -2674,11 +2703,6 @@ static void ccs_set_compose_scaler(struct v4l2_subdev *subdev,
& ~1;
else
sel->r.height = sink_crop->height;
-
- if (sel->which == V4L2_SUBDEV_FORMAT_ACTIVE) {
- sensor->scale_m = scale_m;
- sensor->scaling_mode = mode;
- }
}
/* We're only called on source pads. This function sets scaling. */
static int ccs_set_compose(struct v4l2_subdev *subdev,
@@ -3785,8 +3809,6 @@ static int ccs_probe(struct i2c_client *client)
sensor->pixel_array = &sensor->ssds[sensor->ssds_used];
sensor->ssds_used++;
- sensor->scale_m = CCS_LIM(sensor, SCALER_N_MIN);
-
/* prepare PLL configuration input values */
sensor->pll.bus_type = CCS_PLL_BUS_TYPE_CSI2_DPHY;
sensor->pll.csi2.lanes = sensor->hwcfg.lanes;
diff --git a/drivers/media/i2c/ccs/ccs.h b/drivers/media/i2c/ccs/ccs.h
index e6fc00a9fa11..d33014f2710b 100644
--- a/drivers/media/i2c/ccs/ccs.h
+++ b/drivers/media/i2c/ccs/ccs.h
@@ -237,9 +237,6 @@ struct ccs_sensor {
u32 embedded_mbus_code;
u8 emb_data_ctrl;
- u8 scale_m;
- u8 scaling_mode;
-
u8 frame_skip;
u16 embedded_start; /* embedded data start line */
u16 embedded_end;
--
2.39.2
