Re: [RFC PATCH net-next v6 02/15] net: page_pool: create hooks for custom page providers

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Mar 7, 2024 at 8:57 PM David Wei <dw@xxxxxxxxxxx> wrote:
>
> On 2024-03-04 18:01, Mina Almasry wrote:
> > From: Jakub Kicinski <kuba@xxxxxxxxxx>
> >
> > The page providers which try to reuse the same pages will
> > need to hold onto the ref, even if page gets released from
> > the pool - as in releasing the page from the pp just transfers
> > the "ownership" reference from pp to the provider, and provider
> > will wait for other references to be gone before feeding this
> > page back into the pool.
> >
> > Signed-off-by: Jakub Kicinski <kuba@xxxxxxxxxx>
> > Signed-off-by: Mina Almasry <almasrymina@xxxxxxxxxx>
> >
> > ---
> >
> > This is implemented by Jakub in his RFC:
> > https://lore.kernel.org/netdev/f8270765-a27b-6ccf-33ea-cda097168d79@xxxxxxxxxx/T/
> >
> > I take no credit for the idea or implementation; I only added minor
> > edits to make this workable with device memory TCP, and removed some
> > hacky test code. This is a critical dependency of device memory TCP
> > and thus I'm pulling it into this series to make it revewable and
> > mergeable.
> >
> > RFC v3 -> v1
> > - Removed unusued mem_provider. (Yunsheng).
> > - Replaced memory_provider & mp_priv with netdev_rx_queue (Jakub).
> >
> > ---
> >  include/net/page_pool/types.h | 12 ++++++++++
> >  net/core/page_pool.c          | 43 +++++++++++++++++++++++++++++++----
> >  2 files changed, 50 insertions(+), 5 deletions(-)
> >
> > diff --git a/include/net/page_pool/types.h b/include/net/page_pool/types.h
> > index 5e43a08d3231..ffe5f31fb0da 100644
> > --- a/include/net/page_pool/types.h
> > +++ b/include/net/page_pool/types.h
> > @@ -52,6 +52,7 @@ struct pp_alloc_cache {
> >   * @dev:     device, for DMA pre-mapping purposes
> >   * @netdev:  netdev this pool will serve (leave as NULL if none or multiple)
> >   * @napi:    NAPI which is the sole consumer of pages, otherwise NULL
> > + * @queue:   struct netdev_rx_queue this page_pool is being created for.
> >   * @dma_dir: DMA mapping direction
> >   * @max_len: max DMA sync memory size for PP_FLAG_DMA_SYNC_DEV
> >   * @offset:  DMA sync address offset for PP_FLAG_DMA_SYNC_DEV
> > @@ -64,6 +65,7 @@ struct page_pool_params {
> >               int             nid;
> >               struct device   *dev;
> >               struct napi_struct *napi;
> > +             struct netdev_rx_queue *queue;
> >               enum dma_data_direction dma_dir;
> >               unsigned int    max_len;
> >               unsigned int    offset;
> > @@ -126,6 +128,13 @@ struct page_pool_stats {
> >  };
> >  #endif
> >
> > +struct memory_provider_ops {
> > +     int (*init)(struct page_pool *pool);
> > +     void (*destroy)(struct page_pool *pool);
> > +     struct page *(*alloc_pages)(struct page_pool *pool, gfp_t gfp);
> > +     bool (*release_page)(struct page_pool *pool, struct page *page);
> > +};
>
> Separate question as I try to adapt bnxt to this and your queue
> configuration API.
>
> How does GVE handle the need to allocate kernel pages for headers and
> dmabuf for payloads?
>
> Reading the code, struct gve_rx_ring is the main per-ring object with a
> page pool. gve_queue_page_lists are filled with page pool netmem
> allocations from the page pool in gve_alloc_queue_page_list(). Are these
> strictly used for payloads only?
>

You're almost correct. We actually don't use the gve queue page lists
for devmem TCP, that's an unrelated GVE feature/code path for low
memory VMs. The code in effect is the !qpl code. In that code, for
incoming RX packets we allocate a new or recycled netmem from the page
pool in gve_alloc_page_dqo(). These buffers are used for payload only
in the case where header split is enabled. In the case header split is
disabled, these buffers are used for the entire incoming packet.

> I found a struct gve_header_buf in both gve_rx_ring and struct
> gve_per_rx_queue_mem_dpo. This is allocated in gve_rx_queue_mem_alloc()
> using dma_alloc_coherent(). Is this where GVE stores headers?
>

Yes, this is where GVE stores headers.

> IOW, GVE only uses page pool to allocate memory for QPLs, and QPLs are
> used by the device for split payloads. Is my understanding correct?
>

-- 
Thanks,
Mina





[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux