Hi Sakari, Am Thu, Feb 29, 2024 at 07:30:33AM +0000 schrieb Sakari Ailus: > On Thu, Feb 29, 2024 at 08:21:42AM +0100, Dominik Brodowski wrote: > > Hi Sakari, > > > > many thanks, this patch helps. Another issue persists, though: > > > > > > $ dmesg | cut -c16- | grep -E "(mei|vsc)" > > mei_me 0000:00:16.0: enabling device (0000 -> 0002) > > mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops) > > mei_pxp 0000:00:16.0-fbf6fcf1-96cf-4e2e-a6a6-1bab8cbe36b1: bound 0000:00:02.0 (ops i915_pxp_tee_component_ops) > > intel_vsc intel_vsc: silicon stepping version is 0:2 > > mei intel_vsc-92335fcf-3203-4472-af93-7b4453ac29da: deferred probe pending: (reason unknown) > > mei intel_vsc-5db76cf6-0a68-4ed6-9b78-0361635e2447: deferred probe pending: (reason unknown) > > You'll probably need the IPU bridge patches from that branch, too. Or you > can try removing the intel-ipu6 driver and modprobing it again. Everything is built into the kernel here - and the kernel I run is pure upstream (plus your patch), therefore no intel-ipu6 driver is available (yet) or active. > > During suspend entry (s2idle), the following messages are emitted: > > > > ACPI Warning: \_SB.PC00.SPI1.SPFD.CVFD.SID: Insufficient arguments - Caller passed 0, method requires 1 (20230628/nsarguments-232) > > intel_vsc intel_vsc: silicon stepping version is 0:2 > > PM: Some devices failed to suspend, or early wake event detected > > ACPI Warning: \_SB.PC00.SPI1.SPFD.CVFD.SID: Insufficient arguments - Caller passed 0, method requires 1 (20230628/nsarguments-232) > > intel_vsc intel_vsc: silicon stepping version is 0:2 > > vsc-tp spi-INTC1094:00: wakeup firmware failed ret: -110 > > vsc-tp spi-INTC1094:00: wakeup firmware failed ret: -110 > > intel_vsc intel_vsc: wait fw ready failed: -110 > > intel_vsc intel_vsc: hw_start failed ret = -110 fw status = > > intel_vsc intel_vsc: unexpected reset: dev_state = RESETTING fw status = > > ACPI Warning: \_SB.PC00.SPI1.SPFD.CVFD.SID: Insufficient arguments - Caller passed 0, method requires 1 (20230628/nsarguments-232) > > intel_vsc intel_vsc: silicon stepping version is 0:2 > > I haven't tried suspending. Is this while streaming or not? No streaming - in fact, without intel-ipu6 available (upstream + your patch, see above). I have now tried upstream plus the ipu6 branch; there I get one message indicating that something is amiss: vsc-tp spi-INTC1094:00: wakeup firmware failed ret: -110 And if I try to do a suspend&resume cycle, the machine hangs. A longer snippet from dmesg from upstream+ipu6 branch: mei_me 0000:00:16.0: enabling device (0000 -> 0002) mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops) mei_pxp 0000:00:16.0-fbf6fcf1-96cf-4e2e-a6a6-1bab8cbe36b1: bound 0000:00:02.0 (ops i915_pxp_tee_component_ops) intel-ipu6 0000:00:05.0: enabling device (0000 -> 0002) intel-ipu6 0000:00:05.0: IPU6 in non-secure mode touch 0x0 mask 0xff intel-ipu6 0000:00:05.0: FW version: 20230925 intel_vsc intel_vsc: silicon stepping version is 0:2 intel-ipu6 0000:00:05.0: IPU6 in non-secure mode touch 0x0 mask 0xff intel-ipu6 0000:00:05.0: FW version: 20230925 intel-ipu6 0000:00:05.0: IPU6 in non-secure mode touch 0x0 mask 0xff intel-ipu6 0000:00:05.0: FW version: 20230925 intel-ipu6 0000:00:05.0: IPU6 in non-secure mode touch 0x0 mask 0xff intel-ipu6 0000:00:05.0: FW version: 20230925 intel-ipu6 0000:00:05.0: IPU6 in non-secure mode touch 0x0 mask 0xff intel-ipu6 0000:00:05.0: FW version: 20230925 intel-ipu6 0000:00:05.0: IPU6 in non-secure mode touch 0x0 mask 0xff intel-ipu6 0000:00:05.0: FW version: 20230925 intel-ipu6 0000:00:05.0: IPU6 in non-secure mode touch 0x0 mask 0xff intel-ipu6 0000:00:05.0: FW version: 20230925 intel-ipu6 0000:00:05.0: IPU6 in non-secure mode touch 0x0 mask 0xff intel-ipu6 0000:00:05.0: FW version: 20230925 intel-ipu6 0000:00:05.0: IPU6 in non-secure mode touch 0x0 mask 0xff intel-ipu6 0000:00:05.0: FW version: 20230925 intel-ipu6 0000:00:05.0: IPU6 in non-secure mode touch 0x0 mask 0xff intel-ipu6 0000:00:05.0: FW version: 20230925 vsc-tp spi-INTC1094:00: wakeup firmware failed ret: -110 intel-ipu6 0000:00:05.0: IPU6 in non-secure mode touch 0x0 mask 0xff intel-ipu6 0000:00:05.0: FW version: 20230925 intel-ipu6 0000:00:05.0: IPU6 in non-secure mode touch 0x0 mask 0xff intel-ipu6 0000:00:05.0: FW version: 20230925 intel-ipu6 0000:00:05.0: Found supported sensor OVTI01A0:00 intel-ipu6 0000:00:05.0: Connected 1 cameras intel-ipu6 0000:00:05.0: IPU6-v3[465d] hardware version 5 Best, Dominik
