Hey Devarsh,
@nas.chung@xxxxxxxxxxxxxxx or @jackson.lee@xxxxxxxxxxxxxxx
Could you please run tests on the hardware with this patch and review
this patch to make sure that this doesn't break the other hardware with
Wave5 chips. Thanks!
On 25.01.2024 18:38, Devarsh Thakkar wrote:
Add support for starting a polling timer in case interrupt is not
s/interrupt/an interrupt/
available. This helps keep the VPU functional in SoC's such as AM62A, where
s/helps keep/helps to keep/
s/SoC's/SoCs/
the hardware interrupt hookup may not be present due to an SoC errata [1].
I would prefer if we do not hack the driver to adjust to SoC errata,
instead of adding polling functionality you could also implement a fake
IRQ chip, then the driver can still assume that an interrupt is present
and you create a virtual interrupt source that does polling in the
background.
You could start by adding the fake irq-chip within the wave5 folder and
later on that could be moved to the `drivers/irqchip/` directory (by you
or someone else), which would be a nice addition to the Linux kernel to
provide machines without IRQ support a way to register an interrupt.
Please have a look at that potential solution, you potentially need to
share the registers between the codec and the fake irq-chip in the DTS.
The timer is shared across all instances of encoder and decoder and is
s/encoder and decoder/encoders and decoders/
started when first instance of encoder or decoder is opened and stopped
s/first/the first/
s/encoder or decoder/an encoder or a decoder/
when last instance is closed, thus avoiding per instance polling and saving
s/last/the last/
CPU bandwidth.
hrtimer callback is called with 5ms polling interval while any of the
s/hrtimer/The hrtimer/
encoder/decoder instances are running to check the interrupt status as
being done in irq handler.
s/irq/the irq/
Could you ellaborate why you choose the HRtimer for this job and why
does it need to be a 5ms polling interval, is that a requirement of this
specific hardware or the best constant you figured out during testing?
Based on above interrupt status, use a worker thread to iterate over the
s/on above interrupt status/on the interrupt status above/
interrupt status for each instance and send completion event as being done
s/completion/a completion/
in irq thread function.
s/irq/the irq/
Parse for irq number before v4l2 device registration and if not available
only then, initialize hrtimer and worker thread.
Thanks for the effort on the description but you do not have to write
out word for word what the code is doing, the code should be descriptive
enough on its own.
More important is that you clearly describe, for example:
- why did you choose a certain design?
- why did you choose for the HRtimer?
- why is the 5ms interval is important (are other intervals also valid?)
- why did you choose to add a polling mechanism instead of possible alternatives (like for example an fake irq-chip),
-
Move the core functionality of irq thread function to a separate function
s/irq/the irq/
wave5_vpu_handle_irq so that it can be used by both the worker thread when
using polling mode and irq thread when using interrupt mode.
s/irq/the irq/
Protect hrtimer access and instance list with device specific mutex locks
s/hrtimer/the hrtimer/
to avoid race conditions while different instances of encoder and decoder
s/encoder and decoder/encoders and decoders/
are started together.
Add module param to change polling interval for debug purpose.
s/module/a module/
s/polling/the polling/
s/debug purpose/debugging purposes/
Here again is the question, what can the user expect with different
polling intervals? Is there a valid range of intervals?
The actual implementation seems good, but I would like to first make
sure that we take the best possible approach to this issue.
Greetings,
Sebastian
[1] https://www.ti.com/lit/pdf/spruj16
(Ref: Section 4.2.3.3 Resets, Interrupts, and Clocks)
Signed-off-by: Devarsh Thakkar <devarsht@xxxxxx>
---
Test logs:
https://gist.github.com/devarsht/613bc8aa66e65814c8374ffb6a4f50fb
---
.../platform/chips-media/wave5/wave5-helper.c | 16 ++-
.../chips-media/wave5/wave5-vpu-dec.c | 13 +-
.../chips-media/wave5/wave5-vpu-enc.c | 13 +-
.../platform/chips-media/wave5/wave5-vpu.c | 117 ++++++++++++------
.../platform/chips-media/wave5/wave5-vpuapi.h | 4 +
5 files changed, 122 insertions(+), 41 deletions(-)
diff --git a/drivers/media/platform/chips-media/wave5/wave5-helper.c b/drivers/media/platform/chips-media/wave5/wave5-helper.c
index 8433ecab230c..475b7628964f 100644
--- a/drivers/media/platform/chips-media/wave5/wave5-helper.c
+++ b/drivers/media/platform/chips-media/wave5/wave5-helper.c
@@ -52,6 +52,8 @@ int wave5_vpu_release_device(struct file *filp,
char *name)
{
struct vpu_instance *inst = wave5_to_vpu_inst(filp->private_data);
+ struct vpu_device *dev = inst->dev;
+ int ret = 0;
v4l2_m2m_ctx_release(inst->v4l2_fh.m2m_ctx);
if (inst->state != VPU_INST_STATE_NONE) {
@@ -71,8 +73,20 @@ int wave5_vpu_release_device(struct file *filp,
}
wave5_cleanup_instance(inst);
+ if (dev->irq < 0) {
+ ret = mutex_lock_interruptible(&dev->dev_lock);
+ if (ret)
+ return ret;
- return 0;
+ if (list_empty(&dev->instances)) {
+ dev_dbg(dev->dev, "Disabling the hrtimer\n");
+ hrtimer_cancel(&dev->hrtimer);
+ }
+
+ mutex_unlock(&dev->dev_lock);
+ }
+
+ return ret;
}
int wave5_vpu_queue_init(void *priv, struct vb2_queue *src_vq, struct vb2_queue *dst_vq,
diff --git a/drivers/media/platform/chips-media/wave5/wave5-vpu-dec.c b/drivers/media/platform/chips-media/wave5/wave5-vpu-dec.c
index ef227af72348..c8624c681fa6 100644
--- a/drivers/media/platform/chips-media/wave5/wave5-vpu-dec.c
+++ b/drivers/media/platform/chips-media/wave5/wave5-vpu-dec.c
@@ -1810,7 +1810,6 @@ static int wave5_vpu_open_dec(struct file *filp)
v4l2_fh_add(&inst->v4l2_fh);
INIT_LIST_HEAD(&inst->list);
- list_add_tail(&inst->list, &dev->instances);
inst->v4l2_m2m_dev = inst->dev->v4l2_m2m_dec_dev;
inst->v4l2_fh.m2m_ctx =
@@ -1867,6 +1866,18 @@ static int wave5_vpu_open_dec(struct file *filp)
wave5_vdi_allocate_sram(inst->dev);
+ ret = mutex_lock_interruptible(&dev->dev_lock);
+ if (ret)
+ goto cleanup_inst;
+
+ if (dev->irq < 0 && !hrtimer_active(&dev->hrtimer) && list_empty(&dev->instances))
+ hrtimer_start(&dev->hrtimer, ns_to_ktime(dev->vpu_poll_interval * NSEC_PER_MSEC),
+ HRTIMER_MODE_REL_PINNED);
+
+ list_add_tail(&inst->list, &dev->instances);
+
+ mutex_unlock(&dev->dev_lock);
+
return 0;
cleanup_inst:
diff --git a/drivers/media/platform/chips-media/wave5/wave5-vpu-enc.c b/drivers/media/platform/chips-media/wave5/wave5-vpu-enc.c
index f29cfa3af94a..9e88424761b6 100644
--- a/drivers/media/platform/chips-media/wave5/wave5-vpu-enc.c
+++ b/drivers/media/platform/chips-media/wave5/wave5-vpu-enc.c
@@ -1554,7 +1554,6 @@ static int wave5_vpu_open_enc(struct file *filp)
v4l2_fh_add(&inst->v4l2_fh);
INIT_LIST_HEAD(&inst->list);
- list_add_tail(&inst->list, &dev->instances);
inst->v4l2_m2m_dev = inst->dev->v4l2_m2m_enc_dev;
inst->v4l2_fh.m2m_ctx =
@@ -1729,6 +1728,18 @@ static int wave5_vpu_open_enc(struct file *filp)
wave5_vdi_allocate_sram(inst->dev);
+ ret = mutex_lock_interruptible(&dev->dev_lock);
+ if (ret)
+ goto cleanup_inst;
+
+ if (dev->irq < 0 && !hrtimer_active(&dev->hrtimer) && list_empty(&dev->instances))
+ hrtimer_start(&dev->hrtimer, ns_to_ktime(dev->vpu_poll_interval * NSEC_PER_MSEC),
+ HRTIMER_MODE_REL_PINNED);
+
+ list_add_tail(&inst->list, &dev->instances);
+
+ mutex_unlock(&dev->dev_lock);
+
return 0;
cleanup_inst:
diff --git a/drivers/media/platform/chips-media/wave5/wave5-vpu.c b/drivers/media/platform/chips-media/wave5/wave5-vpu.c
index bfe4caa79cc9..968ec9baf1ef 100644
--- a/drivers/media/platform/chips-media/wave5/wave5-vpu.c
+++ b/drivers/media/platform/chips-media/wave5/wave5-vpu.c
@@ -26,6 +26,9 @@ struct wave5_match_data {
const char *fw_name;
};
+static int vpu_poll_interval = 5;
+module_param(vpu_poll_interval, int, 0644);
+
int wave5_vpu_wait_interrupt(struct vpu_instance *inst, unsigned int timeout)
{
int ret;
@@ -40,7 +43,7 @@ int wave5_vpu_wait_interrupt(struct vpu_instance *inst, unsigned int timeout)
return 0;
}
-static irqreturn_t wave5_vpu_irq_thread(int irq, void *dev_id)
+static void wave5_vpu_handle_irq(void *dev_id)
{
u32 seq_done;
u32 cmd_done;
@@ -48,42 +51,67 @@ static irqreturn_t wave5_vpu_irq_thread(int irq, void *dev_id)
struct vpu_instance *inst;
struct vpu_device *dev = dev_id;
- if (wave5_vdi_read_register(dev, W5_VPU_VPU_INT_STS)) {
- irq_reason = wave5_vdi_read_register(dev, W5_VPU_VINT_REASON);
- wave5_vdi_write_register(dev, W5_VPU_VINT_REASON_CLR, irq_reason);
- wave5_vdi_write_register(dev, W5_VPU_VINT_CLEAR, 0x1);
-
- list_for_each_entry(inst, &dev->instances, list) {
- seq_done = wave5_vdi_read_register(dev, W5_RET_SEQ_DONE_INSTANCE_INFO);
- cmd_done = wave5_vdi_read_register(dev, W5_RET_QUEUE_CMD_DONE_INST);
-
- if (irq_reason & BIT(INT_WAVE5_INIT_SEQ) ||
- irq_reason & BIT(INT_WAVE5_ENC_SET_PARAM)) {
- if (seq_done & BIT(inst->id)) {
- seq_done &= ~BIT(inst->id);
- wave5_vdi_write_register(dev, W5_RET_SEQ_DONE_INSTANCE_INFO,
- seq_done);
- complete(&inst->irq_done);
- }
+ irq_reason = wave5_vdi_read_register(dev, W5_VPU_VINT_REASON);
+ wave5_vdi_write_register(dev, W5_VPU_VINT_REASON_CLR, irq_reason);
+ wave5_vdi_write_register(dev, W5_VPU_VINT_CLEAR, 0x1);
+
+ list_for_each_entry(inst, &dev->instances, list) {
+ seq_done = wave5_vdi_read_register(dev, W5_RET_SEQ_DONE_INSTANCE_INFO);
+ cmd_done = wave5_vdi_read_register(dev, W5_RET_QUEUE_CMD_DONE_INST);
+
+ if (irq_reason & BIT(INT_WAVE5_INIT_SEQ) ||
+ irq_reason & BIT(INT_WAVE5_ENC_SET_PARAM)) {
+ if (seq_done & BIT(inst->id)) {
+ seq_done &= ~BIT(inst->id);
+ wave5_vdi_write_register(dev, W5_RET_SEQ_DONE_INSTANCE_INFO,
+ seq_done);
+ complete(&inst->irq_done);
}
+ }
- if (irq_reason & BIT(INT_WAVE5_DEC_PIC) ||
- irq_reason & BIT(INT_WAVE5_ENC_PIC)) {
- if (cmd_done & BIT(inst->id)) {
- cmd_done &= ~BIT(inst->id);
- wave5_vdi_write_register(dev, W5_RET_QUEUE_CMD_DONE_INST,
- cmd_done);
- inst->ops->finish_process(inst);
- }
+ if (irq_reason & BIT(INT_WAVE5_DEC_PIC) ||
+ irq_reason & BIT(INT_WAVE5_ENC_PIC)) {
+ if (cmd_done & BIT(inst->id)) {
+ cmd_done &= ~BIT(inst->id);
+ wave5_vdi_write_register(dev, W5_RET_QUEUE_CMD_DONE_INST,
+ cmd_done);
+ inst->ops->finish_process(inst);
}
-
- wave5_vpu_clear_interrupt(inst, irq_reason);
}
+
+ wave5_vpu_clear_interrupt(inst, irq_reason);
}
+}
+
+static irqreturn_t wave5_vpu_irq_thread(int irq, void *dev_id)
+{
+ struct vpu_device *dev = dev_id;
+
+ if (wave5_vdi_read_register(dev, W5_VPU_VPU_INT_STS))
+ wave5_vpu_handle_irq(dev);
return IRQ_HANDLED;
}
+static void wave5_vpu_irq_work_fn(struct kthread_work *work)
+{
+ struct vpu_device *dev = container_of(work, struct vpu_device, work);
+
+ if (wave5_vdi_read_register(dev, W5_VPU_VPU_INT_STS))
+ wave5_vpu_handle_irq(dev);
+}
+
+static enum hrtimer_restart wave5_vpu_timer_callback(struct hrtimer *timer)
+{
+ struct vpu_device *dev =
+ container_of(timer, struct vpu_device, hrtimer);
+
+ kthread_queue_work(dev->worker, &dev->work);
+ hrtimer_forward_now(timer, ns_to_ktime(vpu_poll_interval * NSEC_PER_MSEC));
+
+ return HRTIMER_RESTART;
+}
+
static int wave5_vpu_load_firmware(struct device *dev, const char *fw_name,
u32 *revision)
{
@@ -209,16 +237,24 @@ static int wave5_vpu_probe(struct platform_device *pdev)
dev->irq = platform_get_irq(pdev, 0);
if (dev->irq < 0) {
- dev_err(&pdev->dev, "failed to get irq resource\n");
- ret = -ENXIO;
- goto err_enc_unreg;
- }
-
- ret = devm_request_threaded_irq(&pdev->dev, dev->irq, NULL,
- wave5_vpu_irq_thread, IRQF_ONESHOT, "vpu_irq", dev);
- if (ret) {
- dev_err(&pdev->dev, "Register interrupt handler, fail: %d\n", ret);
- goto err_enc_unreg;
+ dev_err(&pdev->dev, "failed to get irq resource, falling back to polling\n");
+ hrtimer_init(&dev->hrtimer, CLOCK_MONOTONIC, HRTIMER_MODE_REL_PINNED);
+ dev->hrtimer.function = &wave5_vpu_timer_callback;
+ dev->worker = kthread_create_worker(0, "vpu_irq_thread");
+ if (IS_ERR(dev->worker)) {
+ dev_err(&pdev->dev, "failed to create vpu irq worker\n");
+ ret = PTR_ERR(dev->worker);
+ goto err_vdi_release;
+ }
+ dev->vpu_poll_interval = vpu_poll_interval;
+ kthread_init_work(&dev->work, wave5_vpu_irq_work_fn);
+ } else {
+ ret = devm_request_threaded_irq(&pdev->dev, dev->irq, NULL,
+ wave5_vpu_irq_thread, IRQF_ONESHOT, "vpu_irq", dev);
+ if (ret) {
+ dev_err(&pdev->dev, "Register interrupt handler, fail: %d\n", ret);
+ goto err_enc_unreg;
+ }
}
ret = wave5_vpu_load_firmware(&pdev->dev, match_data->fw_name, &fw_revision);
@@ -254,6 +290,11 @@ static int wave5_vpu_remove(struct platform_device *pdev)
{
struct vpu_device *dev = dev_get_drvdata(&pdev->dev);
+ if (dev->irq < 0) {
+ kthread_destroy_worker(dev->worker);
+ hrtimer_cancel(&dev->hrtimer);
+ }
+
mutex_destroy(&dev->dev_lock);
mutex_destroy(&dev->hw_lock);
clk_bulk_disable_unprepare(dev->num_clks, dev->clks);
diff --git a/drivers/media/platform/chips-media/wave5/wave5-vpuapi.h b/drivers/media/platform/chips-media/wave5/wave5-vpuapi.h
index 352f6e904e50..edc50450ddb8 100644
--- a/drivers/media/platform/chips-media/wave5/wave5-vpuapi.h
+++ b/drivers/media/platform/chips-media/wave5/wave5-vpuapi.h
@@ -756,6 +756,10 @@ struct vpu_device {
u32 product_code;
struct ida inst_ida;
struct clk_bulk_data *clks;
+ struct hrtimer hrtimer;
+ struct kthread_work work;
+ struct kthread_worker *worker;
+ int vpu_poll_interval;
int num_clks;
};
--
2.34.1
