Hi Umang, On Wed, Jan 31, 2024 at 11:22:05AM +0530, Umang Jain wrote: > Use the v4l2_link_freq_to_bitmap() helper to figure out which > driver-supported link frequencies can be used on a given system. > > Signed-off-by: Umang Jain <umang.jain@xxxxxxxxxxxxxxxx> > --- > drivers/media/i2c/imx335.c | 36 ++++++++++++++++++------------------ > 1 file changed, 18 insertions(+), 18 deletions(-) > > diff --git a/drivers/media/i2c/imx335.c b/drivers/media/i2c/imx335.c > index 927b4806a5d7..73691069556f 100644 > --- a/drivers/media/i2c/imx335.c > +++ b/drivers/media/i2c/imx335.c > @@ -49,7 +49,7 @@ > #define IMX335_INCLK_RATE 24000000 > > /* CSI2 HW configuration */ > -#define IMX335_LINK_FREQ 594000000 > +#define IMX335_LINK_FREQ 594000000LL If you change this, please make it ULL---it's unsigned. > #define IMX335_NUM_DATA_LANES 4 > > #define IMX335_REG_MIN 0x00 > @@ -134,6 +134,7 @@ struct imx335_mode { > * @vblank: Vertical blanking in lines > * @cur_mode: Pointer to current selected sensor mode > * @mutex: Mutex for serializing sensor controls > + * @link_freq_bitmap: Menu bitmap for link_freq_ctrl > * @cur_mbus_code: Currently selected media bus format code > */ > struct imx335 { > @@ -157,6 +158,7 @@ struct imx335 { > u32 vblank; > const struct imx335_mode *cur_mode; > struct mutex mutex; > + unsigned long link_freq_bitmap; > u32 cur_mbus_code; > }; > > @@ -404,7 +406,8 @@ static int imx335_update_controls(struct imx335 *imx335, > { > int ret; > > - ret = __v4l2_ctrl_s_ctrl(imx335->link_freq_ctrl, mode->link_freq_idx); > + ret = __v4l2_ctrl_s_ctrl(imx335->link_freq_ctrl, > + __ffs(imx335->link_freq_bitmap)); > if (ret) > return ret; > > @@ -690,6 +693,13 @@ static int imx335_init_state(struct v4l2_subdev *sd, > fmt.which = sd_state ? V4L2_SUBDEV_FORMAT_TRY : V4L2_SUBDEV_FORMAT_ACTIVE; > imx335_fill_pad_format(imx335, &supported_mode, &fmt); > > + mutex_lock(&imx335->mutex); > + __v4l2_ctrl_modify_range(imx335->link_freq_ctrl, 0, > + __fls(imx335->link_freq_bitmap), > + ~(imx335->link_freq_bitmap), > + __ffs(imx335->link_freq_bitmap)); > + mutex_unlock(&imx335->mutex); > + > return imx335_set_pad_format(sd, sd_state, &fmt); > } > > @@ -938,19 +948,10 @@ static int imx335_parse_hw_config(struct imx335 *imx335) > goto done_endpoint_free; > } > > - if (!bus_cfg.nr_of_link_frequencies) { > - dev_err(imx335->dev, "no link frequencies defined\n"); > - ret = -EINVAL; > - goto done_endpoint_free; > - } > - > - for (i = 0; i < bus_cfg.nr_of_link_frequencies; i++) > - if (bus_cfg.link_frequencies[i] == IMX335_LINK_FREQ) > - goto done_endpoint_free; > - > - dev_err(imx335->dev, "no compatible link frequencies found\n"); > - > - ret = -EINVAL; > + ret = v4l2_link_freq_to_bitmap(imx335->dev, bus_cfg.link_frequencies, > + bus_cfg.nr_of_link_frequencies, > + link_freq, ARRAY_SIZE(link_freq), > + &imx335->link_freq_bitmap); Thanks! :-) > > done_endpoint_free: > v4l2_fwnode_endpoint_free(&bus_cfg); > @@ -1098,9 +1099,8 @@ static int imx335_init_controls(struct imx335 *imx335) > imx335->link_freq_ctrl = v4l2_ctrl_new_int_menu(ctrl_hdlr, > &imx335_ctrl_ops, > V4L2_CID_LINK_FREQ, > - ARRAY_SIZE(link_freq) - > - 1, > - mode->link_freq_idx, > + __fls(imx335->link_freq_bitmap), > + __ffs(imx335->link_freq_bitmap), > link_freq); > if (imx335->link_freq_ctrl) > imx335->link_freq_ctrl->flags |= V4L2_CTRL_FLAG_READ_ONLY; -- Regards, Sakari Ailus