Le 07/02/2024 à 10:12, Hans Verkuil a écrit :
Hi Benjamin,
On 06/02/2024 09:58, Hans Verkuil wrote:
On 06/02/2024 09:02, Benjamin Gaignard wrote:
Unlike when resolution change on keyframes, dynamic resolution change
on inter frames doesn't allow to do a stream off/on sequence because
it is need to keep all previous references alive to decode inter frames.
This constraint have two main problems:
- more memory consumption.
- more buffers in use.
To solve these issue this series introduce DELETE_BUFS ioctl and remove
the 32 buffers limit per queue.
This v19 looks good. There are three outstanding issues that I need to take a
look at:
1) Can we still signal support for DELETE_BUFS in the V4L2_BUF_CAP_ caps?
It would be nice to have, but I'm not sure if and how that can be done.
So, I came up with the following patch to add back the V4L2_BUF_CAP_SUPPORTS_DELETE_BUFS
capability. If the DELETE_BUFS ioctl is valid, then it sets this capability
before calling vidioc_reqbufs or vidioc_create_bufs. So right now it will set
this for any queue. If we ever want to disable this for a specific queue, then
either the driver has to override these two ops and clear the flag, or a new
vb2_queue flag (e.g. disable_delete_bufs) is added and vb2_set_flags_and_caps()
will clear that capability based on that flag.
In any case, for now just set it for both queues by default.
If you agree that this is a good way to proceed, then can you incorporate this
into a v20? You can add the documentation for this cap from the v17 version.
Do you want it to be a separate patch or included in the patch introducing DELETE_BUFS ioctl ?
Regards,
Hans
Signed-off-by: Hans Verkuil <hverkuil-cisco@xxxxxxxxx>
---
diff --git a/drivers/media/common/videobuf2/videobuf2-v4l2.c b/drivers/media/common/videobuf2/videobuf2-v4l2.c
index 8e437104f9c1..64f2d662d068 100644
--- a/drivers/media/common/videobuf2/videobuf2-v4l2.c
+++ b/drivers/media/common/videobuf2/videobuf2-v4l2.c
@@ -685,7 +685,7 @@ static void vb2_set_flags_and_caps(struct vb2_queue *q, u32 memory,
*flags &= V4L2_MEMORY_FLAG_NON_COHERENT;
}
- *caps = V4L2_BUF_CAP_SUPPORTS_ORPHANED_BUFS;
+ *caps |= V4L2_BUF_CAP_SUPPORTS_ORPHANED_BUFS;
if (q->io_modes & VB2_MMAP)
*caps |= V4L2_BUF_CAP_SUPPORTS_MMAP;
if (q->io_modes & VB2_USERPTR)
diff --git a/drivers/media/v4l2-core/v4l2-ioctl.c b/drivers/media/v4l2-core/v4l2-ioctl.c
index a172d33edd19..45bc705e171e 100644
--- a/drivers/media/v4l2-core/v4l2-ioctl.c
+++ b/drivers/media/v4l2-core/v4l2-ioctl.c
@@ -2100,6 +2100,7 @@ static int v4l_overlay(const struct v4l2_ioctl_ops *ops,
static int v4l_reqbufs(const struct v4l2_ioctl_ops *ops,
struct file *file, void *fh, void *arg)
{
+ struct video_device *vfd = video_devdata(file);
struct v4l2_requestbuffers *p = arg;
int ret = check_fmt(file, p->type);
@@ -2108,6 +2109,9 @@ static int v4l_reqbufs(const struct v4l2_ioctl_ops *ops,
memset_after(p, 0, flags);
+ if (is_valid_ioctl(vfd, VIDIOC_DELETE_BUFS))
+ p->capabilities = V4L2_BUF_CAP_SUPPORTS_DELETE_BUFS;
+
return ops->vidioc_reqbufs(file, fh, p);
}
@@ -2141,6 +2145,7 @@ static int v4l_dqbuf(const struct v4l2_ioctl_ops *ops,
static int v4l_create_bufs(const struct v4l2_ioctl_ops *ops,
struct file *file, void *fh, void *arg)
{
+ struct video_device *vfd = video_devdata(file);
struct v4l2_create_buffers *create = arg;
int ret = check_fmt(file, create->format.type);
@@ -2151,6 +2156,9 @@ static int v4l_create_bufs(const struct v4l2_ioctl_ops *ops,
v4l_sanitize_format(&create->format);
+ if (is_valid_ioctl(vfd, VIDIOC_DELETE_BUFS))
+ create->capabilities = V4L2_BUF_CAP_SUPPORTS_DELETE_BUFS;
+
ret = ops->vidioc_create_bufs(file, fh, create);
if (create->format.type == V4L2_BUF_TYPE_VIDEO_CAPTURE ||
diff --git a/include/uapi/linux/videodev2.h b/include/uapi/linux/videodev2.h
index 03443833aaaa..da307f46f903 100644
--- a/include/uapi/linux/videodev2.h
+++ b/include/uapi/linux/videodev2.h
@@ -1036,6 +1036,7 @@ struct v4l2_requestbuffers {
#define V4L2_BUF_CAP_SUPPORTS_M2M_HOLD_CAPTURE_BUF (1 << 5)
#define V4L2_BUF_CAP_SUPPORTS_MMAP_CACHE_HINTS (1 << 6)
#define V4L2_BUF_CAP_SUPPORTS_MAX_NUM_BUFFERS (1 << 7)
+#define V4L2_BUF_CAP_SUPPORTS_DELETE_BUFS (1 << 8)
/**
* struct v4l2_plane - plane info for multi-planar buffers
