On Wed, 31 Jan 2024 16:47:06 +0000, Daniel Scally wrote: > Add the yaml binding for ARM's Mali-C55 Image Signal Processor. > > Acked-by: Nayden Kanchev <nayden.kanchev@xxxxxxx> > Signed-off-by: Daniel Scally <dan.scally@xxxxxxxxxxxxxxxx> > --- > .../bindings/media/arm,mali-c55.yaml | 51 +++++++++++++++++++ > 1 file changed, 51 insertions(+) > create mode 100644 Documentation/devicetree/bindings/media/arm,mali-c55.yaml > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: dtschema/dtc warnings/errors: Documentation/devicetree/bindings/media/arm,mali-c55.example.dts:29.18-33.13: Warning (unit_address_vs_reg): /example-0/isp@400000/port@0: node has a unit name, but no reg or ranges property Documentation/devicetree/bindings/media/arm,mali-c55.example.dts:30.32-32.15: Warning (unit_address_vs_reg): /example-0/isp@400000/port@0/endpoint@0: node has a unit name, but no reg or ranges property /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/arm,mali-c55.example.dtb: isp@400000: 'port' is a required property from schema $id: http://devicetree.org/schemas/media/arm,mali-c55.yaml# /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/arm,mali-c55.example.dtb: isp@400000: 'port@0' does not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/media/arm,mali-c55.yaml# doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20240131164709.810587-3-dan.scally@xxxxxxxxxxxxxxxx The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
