Hi, On 1/16/24 17:18, Laurent Pinchart wrote: > On Tue, Jan 16, 2024 at 05:12:50PM +0100, Hans de Goede wrote: >> Hi, >> >> On 1/11/24 07:55, bingbu.cao@xxxxxxxxx wrote: >>> From: Bingbu Cao <bingbu.cao@xxxxxxxxx> >>> >>> This patch series adds a driver for Intel IPU6 input system. >>> IPU6 is the sixth generation of Imaging Processing Unit, it is a PCI >>> device which can be found in some Intel Client Platforms. User can use >>> IPU6 to capture images from MIPI camera sensors. >>> >>> IPU6 has its own firmware which exposes ABIs to driver, and communicates >>> with CSE to do firmware authentication. IPU6 has its MMU hardware, so >>> the driver sets up a page table to allow IPU6 DMA to access the system >>> memory. >>> >>> IPU6 input system driver uses MC and V4L2 sub-device APIs besides V4L2. >>> --- >>> v2 -> v3: >>> - Add line-based metadata capture support >>> - Fix header files inclusion issues >>> - Fix the CSI2 timing calculation >>> - Fix crash when remove module during streaming >>> - Remove some unused code >>> - Use cross-referencing links in documentation >>> - Update Makefile to use ":=" for objects >>> - Fix several bugs and coding style issues >> >> So I've given this version a try on a Lenovo X1 yoga gen 8 with ov2740 >> sensor using the ongoing libcamera SoftISP work + this small patch >> to enable the SoftISP on IPU6 : >> >> https://github.com/jwrdegoede/libcamera/commit/3172f3703cf7076390fbf86c3b43e388c2422b31 >> >> things work fine when using patch 1-15 + 17 on top of 6.7, note >> I'm skipping patch 16 ("media: ipu6/isys: support line-based >> metadata capture support")" here! >> >> However when I instead apply the whole series on top of: >> https://git.linuxtv.org/sailus/media_tree.git/log/?h=metadata >> >> Then things stop working, with the following errors >> (I added extra error logging to figure out in which syscall >> resetRoutingTable() fails and made libcamera ignore the routing >> errors): >> >> [2:02:04.466310686] [8943] ERROR SimplePipeline simple.cpp:1443 GetRouting() failed -25 >> [2:02:04.466315975] [8943] ERROR SimplePipeline simple.cpp:1574 Failed to reset routes for /dev/v4l-subdev1: Inappropriate ioctl for device >> [2:02:04.466366331] [8943] ERROR SimplePipeline simple.cpp:1443 GetRouting() failed -25 >> [2:02:04.466370025] [8943] ERROR SimplePipeline simple.cpp:1574 Failed to reset routes for /dev/v4l-subdev4: Inappropriate ioctl for device >> [2:03:32.334708887] [8929] INFO Camera camera.cpp:1183 configuring streams: (0) 1924x1088-BGR888 >> [2:03:32.335129023] [8943] ERROR SimplePipeline simple.cpp:1205 Unable to configure capture in 1932x1092-BA10 (got 0x0-@...) >> Failed to configure camera. >> >> I was sorta assuming that the new metadata-stream support would >> be backwards compatible for userspace without support for this, >> so I think this is a bug ? > > The ABI has changed, it's not stable in mainline yet (which is why it > requires a kernel code change to enable it, see > https://git.linuxtv.org/sailus/media_tree.git/commit/?h=metadata&id=cc8be69a5c04b71bbf92fa26633ece13305ca451). Thanks. So I reverted this patch to have the streams subdev API disabled by default again, after this the resetRouting errors are gone, but things still fail with: [2:03:32.335129023] [8943] ERROR SimplePipeline simple.cpp:1205 Unable to configure capture in 1932x1092-BA10 (got 0x0-@...) Failed to configure camera. When using Sakari's metadata branch and including patch 16 from this series. I'll just use media_stage/master + this series minus patch 16 for now. Regards, Hans > >> I would be happy to test any patches to fix this. >
