The device does not implement the power line frequency control correctly. It is a UVC 1.5 device, but implements the control as a UVC 1.1 device. Add the corresponding control mapping override. Bus 003 Device 002: ID 3277:009e Shine-Optics Integrated Camera Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.01 bDeviceClass 239 Miscellaneous Device bDeviceSubClass 2 bDeviceProtocol 1 Interface Association bMaxPacketSize0 64 idVendor 0x3277 idProduct 0x009e bcdDevice 0.01 iManufacturer 3 Shine-Optics iProduct 1 Integrated Camera iSerial 2 0001 Signed-off-by: Ricardo Ribalda <ribalda@xxxxxxxxxxxx> --- Changes in v2: - Fix camera name in subject - Link to v1: https://lore.kernel.org/r/20240108-shine-v1-1-9d7b03a1a901@xxxxxxxxxxxx --- drivers/media/usb/uvc/uvc_driver.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/drivers/media/usb/uvc/uvc_driver.c b/drivers/media/usb/uvc/uvc_driver.c index 08fcd2ffa727..ceca1addd7e0 100644 --- a/drivers/media/usb/uvc/uvc_driver.c +++ b/drivers/media/usb/uvc/uvc_driver.c @@ -3012,6 +3012,15 @@ static const struct usb_device_id uvc_ids[] = { .bInterfaceSubClass = 1, .bInterfaceProtocol = 0, .driver_info = (kernel_ulong_t)&uvc_ctrl_power_line_limited }, + /* Shine-Optics Integrated Camera */ + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE + | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x3277, + .idProduct = 0x009e, + .bInterfaceClass = USB_CLASS_VIDEO, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = UVC_PC_PROTOCOL_15, + .driver_info = (kernel_ulong_t)&uvc_ctrl_power_line_uvc11 }, /* Acer EasyCamera */ { .match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_INFO, --- base-commit: 0dd3ee31125508cd67f7e7172247f05b7fd1753a change-id: 20240108-shine-06c600d17a2a Best regards, -- Ricardo Ribalda <ribalda@xxxxxxxxxxxx>
