On Wed, Jan 03, 2024 at 12:06:33PM -0800, Randy Dunlap wrote:
> On 1/3/24 09:48, Laurent Pinchart wrote:
> > On Wed, Jan 03, 2024 at 04:58:05PM +0100, Arnd Bergmann wrote:
> >> From: Arnd Bergmann <arnd@xxxxxxxx>
> >>
> >> The recently added driver uses the firmware loader mechanism but causes
> >> a link failure when that is in a loadable module while thp7312 itself
> >> is built-in:
> >>
> >> arm-linux-gnueabi-ld: drivers/media/i2c/thp7312.o: in function `thp7312_probe':
> >> thp7312.c:(.text+0x4164): undefined reference to `firmware_upload_register'
> >>
> >> Select the required Kconfig symbol. Note that the driver specifically
> >> needs the firmware upload interface that is controlled by CONFIG_FW_UPLOAD,
> >> but there is no link failure when that is disabled because the interfaces
> >> are stubbed out here.
> >>
> >> Fixes: 7a52ab415b43 ("media: i2c: Add driver for THine THP7312")
> >> Signed-off-by: Arnd Bergmann <arnd@xxxxxxxx>
> >
> > I've posted a similar fix yesterday, see
> > https://lore.kernel.org/linux-media/20240102074518.24968-1-laurent.pinchart@xxxxxxxxxxxxxxxx
> >
> > What approach do you think is best ?
>
> By far the dominant use of FW_LOADER is to select it instead of depend on it,
> so I prefer Arnd's patch.
The alternative could save space, but I expect that to be an uncommon
use case, as FW_LOADER will likely be selected for other reasons anyway.
Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
> >> ---
> >> drivers/media/i2c/Kconfig | 1 +
> >> 1 file changed, 1 insertion(+)
> >>
> >> diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
> >> index 78a87331686e..4c3435921f19 100644
> >> --- a/drivers/media/i2c/Kconfig
> >> +++ b/drivers/media/i2c/Kconfig
> >> @@ -674,6 +674,7 @@ menu "Camera ISPs"
> >> config VIDEO_THP7312
> >> tristate "THine THP7312 support"
> >> depends on I2C
> >> + select FW_LOADER
> >> select MEDIA_CONTROLLER
> >> select V4L2_CCI_I2C
> >> select V4L2_FWNODE
--
Regards,
Laurent Pinchart
