According to user manual, reset line should be deasserted before clocks are enabled. Also fix power down sequence to be reverse of that. Fixes: a4260ea49547 ("media: sun4i: Add H3 deinterlace driver") Signed-off-by: Jernej Skrabec <jernej.skrabec@xxxxxxxxx> --- .../media/platform/sunxi/sun8i-di/sun8i-di.c | 25 ++++++++++--------- 1 file changed, 13 insertions(+), 12 deletions(-) diff --git a/drivers/media/platform/sunxi/sun8i-di/sun8i-di.c b/drivers/media/platform/sunxi/sun8i-di/sun8i-di.c index 34e099939284..f253a40cc04f 100644 --- a/drivers/media/platform/sunxi/sun8i-di/sun8i-di.c +++ b/drivers/media/platform/sunxi/sun8i-di/sun8i-di.c @@ -929,11 +929,18 @@ static int deinterlace_runtime_resume(struct device *device) return ret; } + ret = reset_control_deassert(dev->rstc); + if (ret) { + dev_err(dev->dev, "Failed to apply reset\n"); + + goto err_exclusive_rate; + } + ret = clk_prepare_enable(dev->bus_clk); if (ret) { dev_err(dev->dev, "Failed to enable bus clock\n"); - goto err_exclusive_rate; + goto err_rst; } ret = clk_prepare_enable(dev->mod_clk); @@ -950,23 +957,16 @@ static int deinterlace_runtime_resume(struct device *device) goto err_mod_clk; } - ret = reset_control_deassert(dev->rstc); - if (ret) { - dev_err(dev->dev, "Failed to apply reset\n"); - - goto err_ram_clk; - } - deinterlace_init(dev); return 0; -err_ram_clk: - clk_disable_unprepare(dev->ram_clk); err_mod_clk: clk_disable_unprepare(dev->mod_clk); err_bus_clk: clk_disable_unprepare(dev->bus_clk); +err_rst: + reset_control_assert(dev->rstc); err_exclusive_rate: clk_rate_exclusive_put(dev->mod_clk); @@ -977,11 +977,12 @@ static int deinterlace_runtime_suspend(struct device *device) { struct deinterlace_dev *dev = dev_get_drvdata(device); - reset_control_assert(dev->rstc); - clk_disable_unprepare(dev->ram_clk); clk_disable_unprepare(dev->mod_clk); clk_disable_unprepare(dev->bus_clk); + + reset_control_assert(dev->rstc); + clk_rate_exclusive_put(dev->mod_clk); return 0; -- 2.43.0