Adding V4L2 read-only control id for serial number as hardware
does not support embedding the serial number in the USB device descriptors.
Comment added noting v4l2_ctrl_handler_setup is not needed for this driver.
Signed-off-by: Dean Anderson <dean@xxxxxxxxxxxx>
---
drivers/media/usb/s2255/s2255drv.c | 52 +++++++++++++++++++++++++++++-
1 file changed, 51 insertions(+), 1 deletion(-)
diff --git a/drivers/media/usb/s2255/s2255drv.c b/drivers/media/usb/s2255/s2255drv.c
index 3c2627712fe9..1f3961835711 100644
--- a/drivers/media/usb/s2255/s2255drv.c
+++ b/drivers/media/usb/s2255/s2255drv.c
@@ -60,6 +60,7 @@
#define S2255_MIN_BUFS 2
#define S2255_SETMODE_TIMEOUT 500
#define S2255_VIDSTATUS_TIMEOUT 350
+#define S2255_MARKER_FIRMWARE cpu_to_le32(0xDDCCBBAAL)
#define S2255_MARKER_FRAME cpu_to_le32(0x2255DA4AL)
#define S2255_MARKER_RESPONSE cpu_to_le32(0x2255ACACL)
#define S2255_RESPONSE_SETMODE cpu_to_le32(0x01)
@@ -323,6 +324,7 @@ struct s2255_buffer {
#define S2255_V4L2_YC_ON 1
#define S2255_V4L2_YC_OFF 0
#define V4L2_CID_S2255_COLORFILTER (V4L2_CID_USER_S2255_BASE + 0)
+#define V4L2_CID_S2255_SERIALNUM (V4L2_CID_USER_S2255_BASE + 1)
/* frame prefix size (sent once every frame) */
#define PREFIX_SIZE 512
@@ -1232,6 +1234,36 @@ static int s2255_s_ctrl(struct v4l2_ctrl *ctrl)
return 0;
}
+/*
+ * serial number is not used in usb device descriptors.
+ * returns serial number from device, 0 if none found.
+ */
+
+static int s2255_g_serialnum(struct s2255_dev *dev)
+{
+#define S2255_SERIALNUM_NONE 0
+#define S2255_I2C_SIZE 16
+#define S2255_I2C_SERIALNUM 0xa2
+#define S2255_I2C_SERIALNUM_OFFSET 0x1ff0
+#define S2255_VENDOR_READREG 0x22
+
+ u8 *buf;
+ int serialnum = S2255_SERIALNUM_NONE;
+
+ buf = kzalloc(S2255_I2C_SIZE, GFP_KERNEL);
+ if (!buf)
+ return serialnum;
+
+ s2255_vendor_req(dev, S2255_VENDOR_READREG, S2255_I2C_SERIALNUM_OFFSET,
+ S2255_I2C_SERIALNUM >> 1, buf, S2255_I2C_SIZE, 0);
+
+ /* verify marker code */
+ if (*(__le32 *)buf == S2255_MARKER_FIRMWARE)
+ serialnum = (buf[12] << 24) + (buf[13] << 16) + (buf[14] << 8) + buf[15];
+ kfree(buf);
+ return serialnum;
+}
+
static int vidioc_g_jpegcomp(struct file *file, void *priv,
struct v4l2_jpegcompression *jc)
{
@@ -1581,6 +1613,17 @@ static const struct v4l2_ctrl_config color_filter_ctrl = {
.def = 1,
};
+static const struct v4l2_ctrl_config v4l2_ctrl_serialnum = {
+ .ops = &s2255_ctrl_ops,
+ .name = "Serial Number",
+ .id = V4L2_CID_S2255_SERIALNUM,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .max = 0x7fffffff,
+ .min = 0,
+ .step = 1,
+ .flags = V4L2_CTRL_FLAG_READ_ONLY,
+};
+
static int s2255_probe_v4l(struct s2255_dev *dev)
{
int ret;
@@ -1588,6 +1631,7 @@ static int s2255_probe_v4l(struct s2255_dev *dev)
int cur_nr = video_nr;
struct s2255_vc *vc;
struct vb2_queue *q;
+ struct v4l2_ctrl_config tmp = v4l2_ctrl_serialnum;
ret = v4l2_device_register(&dev->interface->dev, &dev->v4l2_dev);
if (ret)
@@ -1598,7 +1642,7 @@ static int s2255_probe_v4l(struct s2255_dev *dev)
vc = &dev->vc[i];
INIT_LIST_HEAD(&vc->buf_list);
- v4l2_ctrl_handler_init(&vc->hdl, 6);
+ v4l2_ctrl_handler_init(&vc->hdl, 7);
v4l2_ctrl_new_std(&vc->hdl, &s2255_ctrl_ops,
V4L2_CID_BRIGHTNESS, -127, 127, 1, DEF_BRIGHT);
v4l2_ctrl_new_std(&vc->hdl, &s2255_ctrl_ops,
@@ -1615,6 +1659,8 @@ static int s2255_probe_v4l(struct s2255_dev *dev)
(dev->pid != 0x2257 || vc->idx <= 1))
v4l2_ctrl_new_custom(&vc->hdl, &color_filter_ctrl,
NULL);
+ tmp.def = s2255_g_serialnum(dev);
+ v4l2_ctrl_new_custom(&vc->hdl, &tmp, NULL);
if (vc->hdl.error) {
ret = vc->hdl.error;
v4l2_ctrl_handler_free(&vc->hdl);
@@ -2306,6 +2352,10 @@ static int s2255_probe(struct usb_interface *interface,
retval = s2255_board_init(dev);
if (retval)
goto errorBOARDINIT;
+ /*
+ * v4l2_ctrl_handler_setup is not required.
+ * V4L2 controls initialized when firmware is loaded.
+ */
s2255_fwload_start(dev);
/* loads v4l specific */
retval = s2255_probe_v4l(dev);
--
2.30.2
