According to the datasheet, bits 0-7 of the AEC LONG GAIN register (0x3508) map to bits 8-15 of the gain value and no masking is required. Thus set analogue gain in a single 16-bit write instead of two 8-bit writes. Signed-off-by: Mikhail Rudenko <mike.rudenko@xxxxxxxxx> --- drivers/media/i2c/ov4689.c | 15 ++------------- 1 file changed, 2 insertions(+), 13 deletions(-) diff --git a/drivers/media/i2c/ov4689.c b/drivers/media/i2c/ov4689.c index 42700ecfbe0e..5392f650960c 100644 --- a/drivers/media/i2c/ov4689.c +++ b/drivers/media/i2c/ov4689.c @@ -32,11 +32,7 @@ #define OV4689_EXPOSURE_STEP 1 #define OV4689_VTS_MAX 0x7fff -#define OV4689_REG_GAIN_H CCI_REG8(0x3508) -#define OV4689_REG_GAIN_L CCI_REG8(0x3509) -#define OV4689_GAIN_H_MASK 0x07 -#define OV4689_GAIN_H_SHIFT 8 -#define OV4689_GAIN_L_MASK 0xff +#define OV4689_REG_GAIN CCI_REG16(0x3508) #define OV4689_GAIN_STEP 1 #define OV4689_GAIN_DEFAULT 0x80 @@ -613,14 +609,7 @@ static int ov4689_set_ctrl(struct v4l2_ctrl *ctrl) break; case V4L2_CID_ANALOGUE_GAIN: ret = ov4689_map_gain(ov4689, val, &sensor_gain); - - cci_write(regmap, OV4689_REG_GAIN_H, - (sensor_gain >> OV4689_GAIN_H_SHIFT) & - OV4689_GAIN_H_MASK, &ret); - - cci_write(regmap, OV4689_REG_GAIN_L, - sensor_gain & OV4689_GAIN_L_MASK, - &ret); + cci_write(regmap, OV4689_REG_GAIN, sensor_gain, &ret); break; case V4L2_CID_VBLANK: cci_write(regmap, OV4689_REG_VTS, -- 2.43.0
