On Fri Dec 1, 2023 at 10:33 AM CET, Luca Weiss wrote:
> Not all SC7280 devices ship with ChromeOS firmware. Other devices need
> PAS for image authentication. That requires the predefined virtual
> address ranges to be passed via scm calls. Define them to enable Venus
> on non-CrOS SC7280 devices.
>
> Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@xxxxxxxxxx>
> Reviewed-by: Vikash Garodia <quic_vgarodia@xxxxxxxxxxx>
> Signed-off-by: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
> ---
> drivers/media/platform/qcom/venus/core.c | 4 ++++
> 1 file changed, 4 insertions(+)
Hi Hans,
Is there anything missing for this to be applied or could you pick this
up for v6.8?
Regards
Luca
>
> diff --git a/drivers/media/platform/qcom/venus/core.c b/drivers/media/platform/qcom/venus/core.c
> index 9cffe975581b..a712dd4f02a5 100644
> --- a/drivers/media/platform/qcom/venus/core.c
> +++ b/drivers/media/platform/qcom/venus/core.c
> @@ -881,6 +881,10 @@ static const struct venus_resources sc7280_res = {
> .vmem_size = 0,
> .vmem_addr = 0,
> .dma_mask = 0xe0000000 - 1,
> + .cp_start = 0,
> + .cp_size = 0x25800000,
> + .cp_nonpixel_start = 0x1000000,
> + .cp_nonpixel_size = 0x24800000,
> .fwname = "qcom/vpu-2.0/venus.mbn",
> };
>
