Convert the driver to use regulator framework instead of set_power callback.
This with gpio_reset platform data provide cleaner way to manage chip VIO,
VDD and reset signal inside the driver.
Signed-off-by: Jarkko Nikula <jhnikula@xxxxxxxxx>
Cc: Eduardo Valentin <eduardo.valentin@xxxxxxxxx>
---
v3:
include/media/si4713.h change was accidentally dropped from v2. Thanks to
Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxx> for noticing.
v2:
I moved all the regulator management to i2c driver part of si4713 as suggested
by Eduardo. Then the si4713-i2c.c can still be used separately from
radio-si4713.c and it's easier to follow what supply voltages are needed.
v1:
I don't have specifications for this chip so I don't know how long the
reset signal must be active after power-up. I used 50 us from Maemo
kernel sources for Nokia N900 and I can successfully enable-disable
transmitter on N900 with vdd power cycling.
---
drivers/media/radio/si4713-i2c.c | 74 ++++++++++++++++++++++++++++++++------
drivers/media/radio/si4713-i2c.h | 5 ++-
include/media/si4713.h | 3 +-
3 files changed, 68 insertions(+), 14 deletions(-)
diff --git a/drivers/media/radio/si4713-i2c.c b/drivers/media/radio/si4713-i2c.c
index a6e6f19..0fab6f8 100644
--- a/drivers/media/radio/si4713-i2c.c
+++ b/drivers/media/radio/si4713-i2c.c
@@ -27,6 +27,8 @@
#include <linux/interrupt.h>
#include <linux/i2c.h>
#include <linux/slab.h>
+#include <linux/gpio.h>
+#include <linux/regulator/consumer.h>
#include <media/v4l2-device.h>
#include <media/v4l2-ioctl.h>
#include <media/v4l2-common.h>
@@ -43,6 +45,11 @@ MODULE_AUTHOR("Eduardo Valentin <eduardo.valentin@xxxxxxxxx>");
MODULE_DESCRIPTION("I2C driver for Si4713 FM Radio Transmitter");
MODULE_VERSION("0.0.1");
+static const char *si4713_supply_names[SI4713_NUM_SUPPLIES] = {
+ "vio",
+ "vdd",
+};
+
#define DEFAULT_RDS_PI 0x00
#define DEFAULT_RDS_PTY 0x00
#define DEFAULT_RDS_PS_NAME ""
@@ -369,7 +376,17 @@ static int si4713_powerup(struct si4713_device *sdev)
if (sdev->power_state)
return 0;
- sdev->platform_data->set_power(1);
+ err = regulator_bulk_enable(ARRAY_SIZE(sdev->supplies),
+ sdev->supplies);
+ if (err) {
+ v4l2_err(&sdev->sd, "Failed to enable supplies: %d\n", err);
+ return err;
+ }
+ if (gpio_is_valid(sdev->gpio_reset)) {
+ udelay(50);
+ gpio_set_value(sdev->gpio_reset, 1);
+ }
+
err = si4713_send_command(sdev, SI4713_CMD_POWER_UP,
args, ARRAY_SIZE(args),
resp, ARRAY_SIZE(resp),
@@ -384,7 +401,13 @@ static int si4713_powerup(struct si4713_device *sdev)
err = si4713_write_property(sdev, SI4713_GPO_IEN,
SI4713_STC_INT | SI4713_CTS);
} else {
- sdev->platform_data->set_power(0);
+ if (gpio_is_valid(sdev->gpio_reset))
+ gpio_set_value(sdev->gpio_reset, 0);
+ err = regulator_bulk_disable(ARRAY_SIZE(sdev->supplies),
+ sdev->supplies);
+ if (err)
+ v4l2_err(&sdev->sd,
+ "Failed to disable supplies: %d\n", err);
}
return err;
@@ -411,7 +434,13 @@ static int si4713_powerdown(struct si4713_device *sdev)
v4l2_dbg(1, debug, &sdev->sd, "Power down response: 0x%02x\n",
resp[0]);
v4l2_dbg(1, debug, &sdev->sd, "Device in reset mode\n");
- sdev->platform_data->set_power(0);
+ if (gpio_is_valid(sdev->gpio_reset))
+ gpio_set_value(sdev->gpio_reset, 0);
+ err = regulator_bulk_disable(ARRAY_SIZE(sdev->supplies),
+ sdev->supplies);
+ if (err)
+ v4l2_err(&sdev->sd,
+ "Failed to disable supplies: %d\n", err);
sdev->power_state = POWER_OFF;
}
@@ -1967,7 +1996,8 @@ static int si4713_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct si4713_device *sdev;
- int rval;
+ struct si4713_platform_data *pdata = client->dev.platform_data;
+ int rval, i;
sdev = kzalloc(sizeof *sdev, GFP_KERNEL);
if (!sdev) {
@@ -1976,11 +2006,26 @@ static int si4713_probe(struct i2c_client *client,
goto exit;
}
- sdev->platform_data = client->dev.platform_data;
- if (!sdev->platform_data) {
- v4l2_err(&sdev->sd, "No platform data registered.\n");
- rval = -ENODEV;
- goto free_sdev;
+ sdev->gpio_reset = -1;
+ if (pdata && gpio_is_valid(pdata->gpio_reset)) {
+ rval = gpio_request(pdata->gpio_reset, "si4713 reset");
+ if (rval) {
+ dev_err(&client->dev,
+ "Failed to request gpio: %d\n", rval);
+ goto free_sdev;
+ }
+ sdev->gpio_reset = pdata->gpio_reset;
+ gpio_direction_output(sdev->gpio_reset, 0);
+ }
+
+ for (i = 0; i < ARRAY_SIZE(sdev->supplies); i++)
+ sdev->supplies[i].supply = si4713_supply_names[i];
+
+ rval = regulator_bulk_get(&client->dev, ARRAY_SIZE(sdev->supplies),
+ sdev->supplies);
+ if (rval) {
+ dev_err(&client->dev, "Cannot get regulators: %d\n", rval);
+ goto free_gpio;
}
v4l2_i2c_subdev_init(&sdev->sd, client, &si4713_subdev_ops);
@@ -1994,7 +2039,7 @@ static int si4713_probe(struct i2c_client *client,
client->name, sdev);
if (rval < 0) {
v4l2_err(&sdev->sd, "Could not request IRQ\n");
- goto free_sdev;
+ goto put_reg;
}
v4l2_dbg(1, debug, &sdev->sd, "IRQ requested.\n");
} else {
@@ -2012,6 +2057,11 @@ static int si4713_probe(struct i2c_client *client,
free_irq:
if (client->irq)
free_irq(client->irq, sdev);
+put_reg:
+ regulator_bulk_free(ARRAY_SIZE(sdev->supplies), sdev->supplies);
+free_gpio:
+ if (gpio_is_valid(sdev->gpio_reset))
+ gpio_free(sdev->gpio_reset);
free_sdev:
kfree(sdev);
exit:
@@ -2031,7 +2081,9 @@ static int si4713_remove(struct i2c_client *client)
free_irq(client->irq, sdev);
v4l2_device_unregister_subdev(sd);
-
+ regulator_bulk_free(ARRAY_SIZE(sdev->supplies), sdev->supplies);
+ if (gpio_is_valid(sdev->gpio_reset))
+ gpio_free(sdev->gpio_reset);
kfree(sdev);
return 0;
diff --git a/drivers/media/radio/si4713-i2c.h b/drivers/media/radio/si4713-i2c.h
index faf8cff..c6dfa7f 100644
--- a/drivers/media/radio/si4713-i2c.h
+++ b/drivers/media/radio/si4713-i2c.h
@@ -211,6 +211,8 @@ struct acomp_info {
u32 enabled;
};
+#define SI4713_NUM_SUPPLIES 2
+
/*
* si4713_device - private data
*/
@@ -220,11 +222,12 @@ struct si4713_device {
/* private data structures */
struct mutex mutex;
struct completion work;
- struct si4713_platform_data *platform_data;
struct rds_info rds_info;
struct limiter_info limiter_info;
struct pilot_info pilot_info;
struct acomp_info acomp_info;
+ struct regulator_bulk_data supplies[SI4713_NUM_SUPPLIES];
+ int gpio_reset;
u32 frequency;
u32 preemphasis;
u32 mute;
diff --git a/include/media/si4713.h b/include/media/si4713.h
index 99850a5..ed7353e 100644
--- a/include/media/si4713.h
+++ b/include/media/si4713.h
@@ -23,8 +23,7 @@
* Platform dependent definition
*/
struct si4713_platform_data {
- /* Set power state, zero is off, non-zero is on. */
- int (*set_power)(int power);
+ int gpio_reset; /* < 0 if not used */
};
/*
--
1.7.2.3
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
