Hi All,
Here is v4 of my patch series to allow the mainline ov2740 driver to be
used on various Lenovo ThinkPad models using the IPU6 + ov2740 for their
camera. This series has been tested on a Lenovo ThinkPad X1 yoga gen 8
with both:
1. The out of tree IPU6 driver with Intel's proprietary userspace stack
2. The pending mainline IPU6 CSI2 receiver patches using raw bayer capture
in combination with the WIP libcamera SoftISP code
Changes in v4:
- Rebase on top of sailus/media_tree/master at commit
79adb3adb331 ("media: stm32-dcmipp: STM32 DCMIPP camera interface driver")
Changes in v3:
- Add missing fwnode_handle_put() in error-exit-paths in patch 3/9
Changes in v2:
- Add patches 3-9 which add 180 MHz link-frequency support
- Fix code in patch 2/9 to stay in 80 chars limit
Regards,
Hans
Hans de Goede (9):
media: ov2740: Add support for reset GPIO
media: ov2740: Add support for external clock
media: ov2740: Move fwnode_graph_get_next_endpoint() call up
media: ov2740: Improve ov2740_check_hwcfg() error reporting
media: ov2740: Fix hts value
media: ov2740: Check hwcfg after allocating the ov2740 struct
media: ov2740: Add support for 180 MHz link frequency
media: ov2740: Add a sleep after resetting the sensor
media: ipu-bridge: Change ov2740 link-frequency to 180 MHz
drivers/media/i2c/ov2740.c | 388 +++++++++++++++++++++++----
drivers/media/pci/intel/ipu-bridge.c | 2 +-
2 files changed, 334 insertions(+), 56 deletions(-)
--
2.43.0
