Alloc ov2740_data and set up the drvdata pointer before calling
ov2740_check_hwcfg().
This is a preparation patch to allow ov2740_check_hwcfg()
to store some of the parsed data in the ov2740 struct.
Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
---
drivers/media/i2c/ov2740.c | 11 ++++++-----
1 file changed, 6 insertions(+), 5 deletions(-)
diff --git a/drivers/media/i2c/ov2740.c b/drivers/media/i2c/ov2740.c
index a646be427ab2..28f4659a6bfb 100644
--- a/drivers/media/i2c/ov2740.c
+++ b/drivers/media/i2c/ov2740.c
@@ -1095,14 +1095,16 @@ static int ov2740_probe(struct i2c_client *client)
bool full_power;
int ret;
- ret = ov2740_check_hwcfg(&client->dev);
- if (ret)
- return dev_err_probe(dev, ret, "failed to check HW configuration\n");
-
ov2740 = devm_kzalloc(&client->dev, sizeof(*ov2740), GFP_KERNEL);
if (!ov2740)
return -ENOMEM;
+ v4l2_i2c_subdev_init(&ov2740->sd, client, &ov2740_subdev_ops);
+
+ ret = ov2740_check_hwcfg(dev);
+ if (ret)
+ return dev_err_probe(dev, ret, "failed to check HW configuration\n");
+
ov2740->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
if (IS_ERR(ov2740->reset_gpio))
return dev_err_probe(dev, PTR_ERR(ov2740->reset_gpio),
@@ -1113,7 +1115,6 @@ static int ov2740_probe(struct i2c_client *client)
return dev_err_probe(dev, PTR_ERR(ov2740->clk),
"failed to get clock\n");
- v4l2_i2c_subdev_init(&ov2740->sd, client, &ov2740_subdev_ops);
full_power = acpi_dev_state_d0(&client->dev);
if (full_power) {
/* ACPI does not always clear the reset GPIO / enable the clock */
--
2.41.0
