This patchset introduces support for Digital Camera Memory Interface
Pixel Processor (DCMIPP) of STMicroelectronics STM32 SoC series.
This initial support implements a single capture pipe
allowing RGB565, YUV, Y, RAW8 and JPEG capture with
frame skipping, prescaling and cropping.
DCMIPP is exposed through 3 subdevices:
- dcmipp_dump_parallel: parallel interface handling
- dcmipp_dump_postproc: frame skipping, prescaling and cropping control
- dcmipp_dump_capture: video device capture node
v9:
- serie rebased on top of master branch of tree sailus/media_tree.git
in order to use init_state instead of init_cfg ops
- addition of link_validate in subdevs & video capture device
(bytecap)
- use local variable rtsc within probe for reset_controller
v8:
- serie rebased on top of master branch of tree sailus/media_tree.git
in order to use v4l2_subdev_state_* functions
v7:
- correct byteproc set_fmt handling and compose/crop/fmt handling
- replace few v4l2_subdev_get_try_* into v4l2_subdev_get_pad_*
- correct ordering within dcmipp_remove
v6:
- correct copyright year in all files
- correct Kconfig (removal of OF addition of select
VIDEO_V4L2_SUBDEV_API/MEDIA_CONTROLLER
- add missing mutex_destroy in error handling
- rely on fwnode_graph_get_endpoint_by_id instead of fwnode_graph_get_next_endpoint
- rely on device_get_match_data instead of of_device_get_match_data
- use local variable for pads_flag initialization
v5:
- removal of dcmipp_frame_size & dcmipp_frame_stride and use
v4l2_fill_pixfmt
- correct typos & avoid check of available buffer at start_streaming
time since this is done by vb2 framework
- avoid set of pad format in dcmipp_par_ent_init and
dcmipp_byteproc_ent_init since done via init_cfg
- reorder bound functions
- use v4l2_subdev_get_fmt in parallel and byteproc subdevs
- correct struct dcmipp_ent_device comments
- removal of dcmipp_hdw_pixel_alignment in bytecap subdev since not
applicable in this byte mode pipeline
v4:
- rework of mutex / spinlock handling
- addition of dma mask setting
- removal of __maybe_unused, use pm_ptr and new declaration macros
- driver now only generate a single stm32-dcmipp.ko module instead of
several as before
- removal of the component framework usage
- various small fixes (function names, lowercase values, indentation,
print formats)
- register name removal in register access function, only dev_dbg with
address & values are kept
- removal of VB2_READ and CAP_READWRITE
- usage of subdev active state mechanism and removal of locally stored
format/compose/crop
- addition of port { } within the stm32mp135.dtsi
v3:
- Have same To & Cc in all patches emails of the serie so that everybody
has coherent view of the serie
- bindings: correct wording, clock-names & label removal
- driver: replace of_graph call with fwnode_graph
- driver: use defined bus-type when calling v4l2_fwnode_endpoint_parse
- driver: remove clock name
- dtsi: remove clock-names property
v2:
- removal of pclk-max-frequency from yaml example dts
- codying-style fixes
- correction in enum functions (format, mbus, frame_size ...) handling
- drop of v4l2_pipeline_pm_ calls, and specific open/close handler of
vdev
- video dev s_stream handling updated to call s_stream of remote subdev
instead of loop until sensor subdev
- code update following media_pipeline & v4l2_async_ api changes since v1
- removal of IP reset call upon error
- removal of link_validate handlers
- addition of V4L2_CAP_IO_MC device_caps
- removal of the frame skip control for the time being, will be added
back in another commit once control method will be agreed
- change byteproc entity type to MEDIA_ENT_F_PROC_VIDEO_SCALER
- various fixes from Dan & Sakari remarks
Alain Volmat (2):
dt-bindings: media: add bindings for stm32 dcmipp
media: MAINTAINERS: add entry for STM32 DCMIPP driver
Hugues Fruchet (3):
media: stm32-dcmipp: STM32 DCMIPP camera interface driver
ARM: dts: stm32: add dcmipp support to stm32mp135
ARM: multi_v7_defconfig: enable STM32 DCMIPP media support
.../bindings/media/st,stm32-dcmipp.yaml | 89 ++
MAINTAINERS | 5 +-
arch/arm/boot/dts/st/stm32mp135.dtsi | 11 +
arch/arm/configs/multi_v7_defconfig | 1 +
drivers/media/platform/st/stm32/Kconfig | 16 +
drivers/media/platform/st/stm32/Makefile | 1 +
.../platform/st/stm32/stm32-dcmipp/Makefile | 4 +
.../st/stm32/stm32-dcmipp/dcmipp-bytecap.c | 956 ++++++++++++++++++
.../st/stm32/stm32-dcmipp/dcmipp-byteproc.c | 565 +++++++++++
.../st/stm32/stm32-dcmipp/dcmipp-common.c | 111 ++
.../st/stm32/stm32-dcmipp/dcmipp-common.h | 216 ++++
.../st/stm32/stm32-dcmipp/dcmipp-core.c | 604 +++++++++++
.../st/stm32/stm32-dcmipp/dcmipp-parallel.c | 440 ++++++++
13 files changed, 3018 insertions(+), 1 deletion(-)
create mode 100644 Documentation/devicetree/bindings/media/st,stm32-dcmipp.yaml
create mode 100644 drivers/media/platform/st/stm32/stm32-dcmipp/Makefile
create mode 100644 drivers/media/platform/st/stm32/stm32-dcmipp/dcmipp-bytecap.c
create mode 100644 drivers/media/platform/st/stm32/stm32-dcmipp/dcmipp-byteproc.c
create mode 100644 drivers/media/platform/st/stm32/stm32-dcmipp/dcmipp-common.c
create mode 100644 drivers/media/platform/st/stm32/stm32-dcmipp/dcmipp-common.h
create mode 100644 drivers/media/platform/st/stm32/stm32-dcmipp/dcmipp-core.c
create mode 100644 drivers/media/platform/st/stm32/stm32-dcmipp/dcmipp-parallel.c
--
2.25.1
