Hi All, Here is v2 of my ov2740 patch series. The big change in v2 is adding a bunch of new patches (patch 3 - 9) to add support for 180 MHz link-frequency. These new patches allow the mainline ov2740 driver to be used on various Lenovo ThinkPad models using the IPU6 + ov2740 for their camera. This series has been tested on a Lenovo ThinkPad X1 yoga gen 8 with both: 1. The out of tree IPU6 driver with Intel's proprietary userspace stack 2. The pending mainline IPU6 CSI2 receiver patches using raw bayer capture in combination with the WIP libcamera SoftISP code Besides the new patches there is a small change in patch 2/9 to stay within the 80 chars limit. Regards, Hans Hans de Goede (9): media: ov2740: Add support for reset GPIO media: ov2740: Add support for external clock media: ov2740: Move fwnode_graph_get_next_endpoint() call up media: ov2740: Improve ov2740_check_hwcfg() error reporting media: ov2740: Fix hts value media: ov2740: Check hwcfg after allocating the ov2740 struct media: ov2740: Add support for 180 MHz link frequency media: ov2740: Add a sleep after resetting the sensor media: ipu-bridge: Change ov2740 link-frequency to 180 MHz drivers/media/i2c/ov2740.c | 375 +++++++++++++++++++++++---- drivers/media/pci/intel/ipu-bridge.c | 2 +- 2 files changed, 326 insertions(+), 51 deletions(-) -- 2.41.0
