From: Bingbu Cao <bingbu.cao@xxxxxxxxx>
As the sensor device maybe accessible right after its async sub-device is
registered, such as ipu-bridge will try to power up sensor by sensor's
client device's runtime PM from the async notifier callback, if runtime PM
is not enabled, it will fail.
So runtime PM should be ready before its async sub-device is registered
and accessible by others.
Fixes: 7ee850546822 ("media: Add sensor driver support for the ov13b10 camera.")
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Bingbu Cao <bingbu.cao@xxxxxxxxx>
---
drivers/media/i2c/ov13b10.c | 14 +++++++++-----
1 file changed, 9 insertions(+), 5 deletions(-)
diff --git a/drivers/media/i2c/ov13b10.c b/drivers/media/i2c/ov13b10.c
index dbc642c5995b..f28a79c16a43 100644
--- a/drivers/media/i2c/ov13b10.c
+++ b/drivers/media/i2c/ov13b10.c
@@ -1536,24 +1536,27 @@ static int ov13b10_probe(struct i2c_client *client)
goto error_handler_free;
}
- ret = v4l2_async_register_subdev_sensor(&ov13b->sd);
- if (ret < 0)
- goto error_media_entity;
/*
* Device is already turned on by i2c-core with ACPI domain PM.
* Enable runtime PM and turn off the device.
*/
-
/* Set the device's state to active if it's in D0 state. */
if (full_power)
pm_runtime_set_active(&client->dev);
pm_runtime_enable(&client->dev);
pm_runtime_idle(&client->dev);
+ ret = v4l2_async_register_subdev_sensor(&ov13b->sd);
+ if (ret < 0)
+ goto error_media_entity_runtime_pm;
+
return 0;
-error_media_entity:
+error_media_entity_runtime_pm:
+ pm_runtime_disable(&client->dev);
+ if (full_power)
+ pm_runtime_set_suspended(&client->dev);
media_entity_cleanup(&ov13b->sd.entity);
error_handler_free:
@@ -1576,6 +1579,7 @@ static void ov13b10_remove(struct i2c_client *client)
ov13b10_free_controls(ov13b);
pm_runtime_disable(&client->dev);
+ pm_runtime_set_suspended(&client->dev);
}
static DEFINE_RUNTIME_DEV_PM_OPS(ov13b10_pm_ops, ov13b10_suspend,
--
2.42.0
