[RFC PATCH v1 05/19] media: renesas: vsp1: Drop custom .get_fmt() handler for histogram

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>

The histogram module is the only one that has a custom .get_fmt()
handler, to handle the special case of the output format being fixed.
This can equally well be handled in the .set_fmt() handler instead.
Beside avoiding special cases and using the same .get_fmt() handler in
all modules, it ensures that the correct format is stored in the active
state for the source pad, including when .set_fmt() is called from
vsp1_entity_init_state(). Both are needed to later switch to the V4L2
subdev active state API.

Signed-off-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
---
 .../media/platform/renesas/vsp1/vsp1_histo.c  | 29 +++++++------------
 1 file changed, 10 insertions(+), 19 deletions(-)

diff --git a/drivers/media/platform/renesas/vsp1/vsp1_histo.c b/drivers/media/platform/renesas/vsp1/vsp1_histo.c
index 576270cb3e63..a4076d82651e 100644
--- a/drivers/media/platform/renesas/vsp1/vsp1_histo.c
+++ b/drivers/media/platform/renesas/vsp1/vsp1_histo.c
@@ -356,30 +356,21 @@ static int histo_set_selection(struct v4l2_subdev *subdev,
 	return ret;
 }
 
-static int histo_get_format(struct v4l2_subdev *subdev,
-			    struct v4l2_subdev_state *sd_state,
-			    struct v4l2_subdev_format *fmt)
-{
-	if (fmt->pad == HISTO_PAD_SOURCE) {
-		fmt->format.code = MEDIA_BUS_FMT_FIXED;
-		fmt->format.width = 0;
-		fmt->format.height = 0;
-		fmt->format.field = V4L2_FIELD_NONE;
-		fmt->format.colorspace = V4L2_COLORSPACE_RAW;
-		return 0;
-	}
-
-	return vsp1_subdev_get_pad_format(subdev, sd_state, fmt);
-}
-
 static int histo_set_format(struct v4l2_subdev *subdev,
 			    struct v4l2_subdev_state *sd_state,
 			    struct v4l2_subdev_format *fmt)
 {
 	struct vsp1_histogram *histo = subdev_to_histo(subdev);
 
-	if (fmt->pad != HISTO_PAD_SINK)
-		return histo_get_format(subdev, sd_state, fmt);
+	if (fmt->pad == HISTO_PAD_SOURCE) {
+		fmt->format.code = MEDIA_BUS_FMT_FIXED;
+		fmt->format.width = 0;
+		fmt->format.height = 0;
+		fmt->format.field = V4L2_FIELD_NONE;
+		fmt->format.colorspace = V4L2_COLORSPACE_RAW;
+
+		return 0;
+	}
 
 	return vsp1_subdev_set_pad_format(subdev, sd_state, fmt,
 					  histo->formats, histo->num_formats,
@@ -390,7 +381,7 @@ static int histo_set_format(struct v4l2_subdev *subdev,
 static const struct v4l2_subdev_pad_ops histo_pad_ops = {
 	.enum_mbus_code = histo_enum_mbus_code,
 	.enum_frame_size = histo_enum_frame_size,
-	.get_fmt = histo_get_format,
+	.get_fmt = vsp1_subdev_get_pad_format,
 	.set_fmt = histo_set_format,
 	.get_selection = histo_get_selection,
 	.set_selection = histo_set_selection,
-- 
Regards,

Laurent Pinchart





[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux