pm_runtime_get_if_in_use() returns an error if Runtime PM is disabled for
the device, in which case it won't increment the use count.
pm_runtime_put() does that unconditionally however. Only call
pm_runtime_put() in case pm_runtime_get_if_in_use() has returned a value >
0.
Signed-off-by: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
---
drivers/media/i2c/imx219.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/drivers/media/i2c/imx219.c b/drivers/media/i2c/imx219.c
index 8436880dcf7a..9865d0b41244 100644
--- a/drivers/media/i2c/imx219.c
+++ b/drivers/media/i2c/imx219.c
@@ -371,7 +371,7 @@ static int imx219_set_ctrl(struct v4l2_ctrl *ctrl)
struct i2c_client *client = v4l2_get_subdevdata(&imx219->sd);
const struct v4l2_mbus_framefmt *format;
struct v4l2_subdev_state *state;
- int ret = 0;
+ int ret = 0, pm_status;
state = v4l2_subdev_get_locked_active_state(&imx219->sd);
format = v4l2_subdev_get_pad_format(&imx219->sd, state, 0);
@@ -393,7 +393,8 @@ static int imx219_set_ctrl(struct v4l2_ctrl *ctrl)
* Applying V4L2 control value only happens
* when power is up for streaming
*/
- if (pm_runtime_get_if_in_use(&client->dev) == 0)
+ pm_status = pm_runtime_get_if_in_use(&client->dev);
+ if (!pm_status)
return 0;
switch (ctrl->id) {
@@ -446,7 +447,8 @@ static int imx219_set_ctrl(struct v4l2_ctrl *ctrl)
break;
}
- pm_runtime_put(&client->dev);
+ if (pm_status > 0)
+ pm_runtime_put(&client->dev);
return ret;
}
--
2.39.2
