Add bindings for OmniVision OV64A40. Signed-off-by: Jacopo Mondi <jacopo.mondi@xxxxxxxxxxxxxxxx> --- .../bindings/media/i2c/ovti,ov64a40.yaml | 98 +++++++++++++++++++ 1 file changed, 98 insertions(+) create mode 100644 Documentation/devicetree/bindings/media/i2c/ovti,ov64a40.yaml diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov64a40.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov64a40.yaml new file mode 100644 index 000000000000..15fbe86bba10 --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov64a40.yaml @@ -0,0 +1,98 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/ovti,ov64a40.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: OmniVision OV64A40 Image Sensor + +maintainers: + - Jacopo Mondi <jacopo.mondi@xxxxxxxxxxxxxxxx> + +allOf: + - $ref: /schemas/media/video-interface-devices.yaml# + +properties: + compatible: + const: ovti,ov64a40 + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + avdd-supply: + description: Analog voltage supply, 2.8 volts + + dvdd-supply: + description: Digital core voltage supply, 1.1 volts + + dovdd-supply: + description: Digital I/O voltage supply, 1.8 volts + + powerdown-gpios: + maxItems: 1 + + reset-gpios: + maxItems: 1 + + port: + $ref: /schemas/graph.yaml#/$defs/port-base + additionalProperties: false + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + additionalProperties: false + + properties: + bus-type: + enum: + - 1 # MIPI CSI-2 C-PHY + - 4 # MIPI CSI-2 D-PHY + data-lanes: true + link-frequencies: true + clock-noncontinuous: true + remote-endpoint: true + +required: + - compatible + - reg + - clocks + - port + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + camera@36 { + compatible = "ovti,ov64a40"; + reg = <0x36>; + clocks = <&camera_clk>; + dovdd-supply = <&vgen4_reg>; + avdd-supply = <&vgen3_reg>; + dvdd-supply = <&vgen2_reg>; + powerdown-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; + rotation = <180>; + orientation = <2>; + + port { + endpoint { + remote-endpoint = <&mipi_csi2_in>; + bus-type = <4>; + data-lanes = <1 2 3 4>; + link-frequencies = /bits/ 64 <456000000>; + }; + }; + }; + }; + +... -- 2.41.0
