Separate CCS static data read-only register access in ccs-reg-access.c by naming them differently. The code in this file generally deals with reading and writing registers where as static data (when it comes to ccs_static_data_read_ro_reg()) contains the read-only register values but no hardware registers are accessed in that case. Signed-off-by: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx> --- drivers/media/i2c/ccs/ccs-reg-access.c | 21 +++++++++++---------- 1 file changed, 11 insertions(+), 10 deletions(-) diff --git a/drivers/media/i2c/ccs/ccs-reg-access.c b/drivers/media/i2c/ccs/ccs-reg-access.c index 25993445f4fe..03daaa8310a6 100644 --- a/drivers/media/i2c/ccs/ccs-reg-access.c +++ b/drivers/media/i2c/ccs/ccs-reg-access.c @@ -197,8 +197,8 @@ static int __ccs_read_addr(struct ccs_sensor *sensor, u32 reg, u32 *val, return 0; } -static int __ccs_read_data(struct ccs_reg *regs, size_t num_regs, - u32 reg, u32 *val) +static int __ccs_static_data_read_ro_reg(struct ccs_reg *regs, size_t num_regs, + u32 reg, u32 *val) { unsigned int width = ccs_reg_width(reg); size_t i; @@ -235,16 +235,17 @@ static int __ccs_read_data(struct ccs_reg *regs, size_t num_regs, return -ENOENT; } -static int ccs_read_data(struct ccs_sensor *sensor, u32 reg, u32 *val) +static int +ccs_static_data_read_ro_reg(struct ccs_sensor *sensor, u32 reg, u32 *val) { - if (!__ccs_read_data(sensor->sdata.sensor_read_only_regs, - sensor->sdata.num_sensor_read_only_regs, - reg, val)) + if (!__ccs_static_data_read_ro_reg(sensor->sdata.sensor_read_only_regs, + sensor->sdata.num_sensor_read_only_regs, + reg, val)) return 0; - return __ccs_read_data(sensor->mdata.module_read_only_regs, - sensor->mdata.num_module_read_only_regs, - reg, val); + return __ccs_static_data_read_ro_reg(sensor->mdata.module_read_only_regs, + sensor->mdata.num_module_read_only_regs, + reg, val); } static int ccs_read_addr_raw(struct ccs_sensor *sensor, u32 reg, u32 *val, @@ -253,7 +254,7 @@ static int ccs_read_addr_raw(struct ccs_sensor *sensor, u32 reg, u32 *val, int rval; if (data) { - rval = ccs_read_data(sensor, reg, val); + rval = ccs_static_data_read_ro_reg(sensor, reg, val); if (!rval) return 0; } -- 2.39.2