Re: [PATCH v2 6/6] drm/vs: Add hdmi driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 2023/11/13 21:31, Dmitry Baryshkov wrote:
> On Mon, 13 Nov 2023 at 14:11, Keith Zhao <keith.zhao@xxxxxxxxxxxxxxxx> wrote:
>>
>>
>>
>> On 2023/10/26 6:23, Dmitry Baryshkov wrote:
>> > On 25/10/2023 13:39, Keith Zhao wrote:
>> >> add hdmi driver as encoder and connect
>> >>
>> >> Signed-off-by: Keith Zhao <keith.zhao@xxxxxxxxxxxxxxxx>
>> >> ---
>> >>   drivers/gpu/drm/verisilicon/Kconfig         |   8 +-
>> >>   drivers/gpu/drm/verisilicon/Makefile        |   1 +
>> >>   drivers/gpu/drm/verisilicon/starfive_hdmi.c | 949 ++++++++++++++++++++
>> >>   drivers/gpu/drm/verisilicon/starfive_hdmi.h | 295 ++++++
>> >>   drivers/gpu/drm/verisilicon/vs_drv.c        |   5 +
>> >>   drivers/gpu/drm/verisilicon/vs_drv.h        |   4 +
>> >>   6 files changed, 1261 insertions(+), 1 deletion(-)
>> >>   create mode 100644 drivers/gpu/drm/verisilicon/starfive_hdmi.c
>> >>   create mode 100644 drivers/gpu/drm/verisilicon/starfive_hdmi.h
>> >>
>> >> diff --git a/drivers/gpu/drm/verisilicon/Kconfig b/drivers/gpu/drm/verisilicon/Kconfig
>> >> index 3a361f8c8..122c786e3 100644
>> >> --- a/drivers/gpu/drm/verisilicon/Kconfig
>> >> +++ b/drivers/gpu/drm/verisilicon/Kconfig
>> >> @@ -12,4 +12,10 @@ config DRM_VERISILICON
>> >>         setting and buffer management. It does not
>> >>         provide 2D or 3D acceleration.
>> >>   -
>> >> +config DRM_VERISILICON_STARFIVE_HDMI
>> >> +    bool "Starfive HDMI extensions"
>> >> +    depends on DRM_VERISILICON
>> >> +    help
>> >> +       This selects support for StarFive soc specific extensions
>> >> +       for the Innosilicon HDMI driver. If you want to enable
>> >> +       HDMI on JH7110 based soc, you should select this option.
>> >> diff --git a/drivers/gpu/drm/verisilicon/Makefile b/drivers/gpu/drm/verisilicon/Makefile
>> >> index 1d48016ca..08350f25b 100644
>> >> --- a/drivers/gpu/drm/verisilicon/Makefile
>> >> +++ b/drivers/gpu/drm/verisilicon/Makefile
>> >> @@ -7,5 +7,6 @@ vs_drm-objs := vs_dc_hw.o \
>> >>           vs_modeset.o \
>> >>           vs_plane.o
>> >>   +vs_drm-$(CONFIG_DRM_VERISILICON_STARFIVE_HDMI) += starfive_hdmi.o
>> >>   obj-$(CONFIG_DRM_VERISILICON) += vs_drm.o
>> >>   diff --git a/drivers/gpu/drm/verisilicon/starfive_hdmi.c b/drivers/gpu/drm/verisilicon/starfive_hdmi.c
>> >> new file mode 100644
>> >> index 000000000..d296c4b71
>> >> --- /dev/null
>> >> +++ b/drivers/gpu/drm/verisilicon/starfive_hdmi.c
>> >> @@ -0,0 +1,949 @@
>> >> +// SPDX-License-Identifier: GPL-2.0-only
>> >> +/*
>> >> + * Copyright (C) 2023 StarFive Technology Co., Ltd.
>> >> + */
>> >> +
>> >> +#include <linux/clk.h>
>> >> +#include <linux/component.h>
>> >> +#include <linux/delay.h>
>> >> +#include <linux/err.h>
>> >> +#include <linux/hdmi.h>
>> >> +#include <linux/i2c.h>
>> >> +#include <linux/irq.h>
>> >> +#include <linux/media-bus-format.h>
>> >> +#include <linux/mfd/syscon.h>
>> >> +#include <linux/module.h>
>> >> +#include <linux/mutex.h>
>> >> +#include <linux/of_device.h>
>> >> +#include <linux/pm_runtime.h>
>> >> +#include <linux/reset.h>
>> >> +
>> >> +#include <drm/bridge/dw_hdmi.h>
>> >> +#include <drm/drm_atomic_helper.h>
>> >> +#include <drm/drm_edid.h>
>> >> +#include <drm/drm_managed.h>
>> >> +#include <drm/drm_of.h>
>> >> +#include <drm/drm_probe_helper.h>
>> >> +#include <drm/drm_simple_kms_helper.h>
>> >> +
>> >> +#include "starfive_hdmi.h"
>> >> +#include "vs_drv.h"
>> >> +#include "vs_crtc.h"
>> >> +
>> >> +static struct starfive_hdmi *encoder_to_hdmi(struct drm_encoder *encoder)
>> >> +{
>> >> +    return container_of(encoder, struct starfive_hdmi, encoder);
>> >> +}
>> >> +
>> >> +static struct starfive_hdmi *connector_to_hdmi(struct drm_connector *connector)
>> >> +{
>> >> +    return container_of(connector, struct starfive_hdmi, connector);
>> >> +}
>> >> +
>> >> +struct starfive_hdmi_i2c {
>> >> +    struct i2c_adapter adap;
>> >> +
>> >> +    u8 ddc_addr;
>> >> +    u8 segment_addr;
>> >> +    /* protects the edid data when use i2c cmd to read edid */
>> >> +    struct mutex lock;
>> >> +    struct completion cmp;
>> >> +};
>> >> +
>> >> +static const struct pre_pll_config pre_pll_cfg_table[] = {
>> >> +    { 25175000,  25175000, 1,  100, 2, 3, 3, 12, 3, 3, 4, 0, 0xf55555},
>> >> +    { 25200000,  25200000, 1,  100, 2, 3, 3, 12, 3, 3, 4, 0, 0},
>> >> +    { 27000000,  27000000, 1,  90, 3, 2, 2, 10, 3, 3, 4, 0, 0},
>> >
>> > Such data structures are usually pretyt limited and hard to handle. Could you please replace it with the runtime calculations of
>> >
>> >> +    { 27027000,  27027000, 1,  90, 3, 2, 2, 10, 3, 3, 4, 0, 0x170a3d},
>> >> +    { 28320000,  28320000, 1,  28, 2, 1, 1,  3, 0, 3, 4, 0, 0x51eb85},
>> >> +    { 30240000,  30240000, 1,  30, 2, 1, 1,  3, 0, 3, 4, 0, 0x3d70a3},
>> >> +    { 31500000,  31500000, 1,  31, 2, 1, 1,  3, 0, 3, 4, 0, 0x7fffff},
>> >> +    { 33750000,  33750000, 1,  33, 2, 1, 1,  3, 0, 3, 4, 0, 0xcfffff},
>> >> +    { 36000000,  36000000, 1,  36, 2, 1, 1,  3, 0, 3, 4, 0, 0},
>> >> +    { 40000000,  40000000, 1,  80, 2, 2, 2, 12, 2, 2, 2, 0, 0},
>> >> +    { 46970000,  46970000, 1,  46, 2, 1, 1,  3, 0, 3, 4, 0, 0xf851eb},
>> >> +    { 49500000,  49500000, 1,  49, 2, 1, 1,  3, 0, 3, 4, 0, 0x7fffff},
>> >> +    { 49000000,  49000000, 1,  49, 2, 1, 1,  3, 0, 3, 4, 0, 0},
>> >> +    { 50000000,  50000000, 1,  50, 2, 1, 1,  3, 0, 3, 4, 0, 0},
>> >> +    { 54000000,  54000000, 1,  54, 2, 1, 1,  3, 0, 3, 4, 0, 0},
>> >> +    { 54054000,  54054000, 1,  54, 2, 1, 1,  3, 0, 3, 4, 0, 0x0dd2f1},
>> >> +    { 57284000,  57284000, 1,  57, 2, 1, 1,  3, 0, 3, 4, 0, 0x48b439},
>> >> +    { 58230000,  58230000, 1,  58, 2, 1, 1,  3, 0, 3, 4, 0, 0x3ae147},
>> >> +    { 59341000,  59341000, 1,  59, 2, 1, 1,  3, 0, 3, 4, 0, 0x574bc6},
>> >> +    { 59400000,  59400000, 1,  99, 3, 1, 1,  1, 3, 3, 4, 0, 0},
>> >> +    { 65000000,  65000000, 1, 130, 2, 2, 2,  12, 0, 2, 2, 0, 0},
>> >> +    { 68250000,  68250000, 1, 68,  2, 1, 1,  3,  0, 3, 4, 0, 0x3fffff},
>> >> +    { 71000000,  71000000, 1,  71, 2, 1, 1,  3, 0, 3,  4, 0, 0},
>> >> +    { 74176000,  74176000, 1,  98, 1, 2, 2,  1, 2, 3, 4, 0, 0xe6ae6b},
>> >> +    { 74250000,  74250000, 1,  99, 1, 2, 2,  1, 2, 3, 4, 0, 0},
>> >> +    { 75000000,  75000000, 1,  75, 2, 1, 1,  3, 0, 3, 4, 0, 0},
>> >> +    { 78750000,  78750000, 1,  78, 2, 1, 1,  3, 0, 3, 4, 0, 0xcfffff},
>> >> +    { 79500000,  79500000, 1,  79, 2, 1, 1,  3, 0, 3, 4, 0, 0x7fffff},
>> >> +    { 83500000,  83500000, 2, 167, 2, 1, 1,  1, 0, 0,  6, 0, 0},
>> >> +    { 83500000, 104375000, 1, 104, 2, 1, 1,  1, 1, 0,  5, 0, 0x600000},
>> >> +    { 84858000,  84858000, 1,  85, 2, 1, 1,  3, 0, 3,  4, 0, 0xdba5e2},
>> >> +    { 85500000,  85500000, 1,  85, 2, 1, 1,  3, 0, 3,  4, 0, 0x7fffff},
>> >> +    { 85750000,  85750000, 1,  85, 2, 1, 1,  3, 0, 3,  4, 0, 0xcfffff},
>> >> +    { 85800000,  85800000, 1,  85, 2, 1, 1,  3, 0, 3,  4, 0, 0xcccccc},
>> >> +    { 88750000,  88750000, 1,  88, 2, 1, 1,  3, 0, 3,  4, 0, 0xcfffff},
>> >> +    { 89910000,  89910000, 1,  89, 2, 1, 1,  3, 0, 3, 4, 0, 0xe8f5c1},
>> >> +    { 90000000,  90000000, 1,  90, 2, 1, 1,  3, 0, 3, 4, 0, 0},
>> >> +    {101000000, 101000000, 1, 101, 2, 1, 1,  3, 0, 3, 4, 0, 0},
>> >> +    {102250000, 102250000, 1, 102, 2, 1, 1,  3, 0, 3, 4, 0, 0x3fffff},
>> >> +    {106500000, 106500000, 1, 106, 2, 1, 1,  3, 0, 3, 4, 0, 0x7fffff},
>> >> +    {108000000, 108000000, 1,  90, 3, 0, 0,  5, 0, 2,  2, 0, 0},
>> >> +    {119000000, 119000000, 1, 119, 2, 1, 1,  3, 0, 3,  4, 0, 0},
>> >> +    {131481000, 131481000, 1,  131, 2, 1, 1,  3, 0, 3,  4, 0, 0x7b22d1},
>> >> +    {135000000, 135000000, 1,  135, 2, 1, 1,  3, 0, 3, 4, 0, 0},
>> >> +    {136750000, 136750000, 1,  136, 2, 1, 1,  3, 0, 3, 4, 0, 0xcfffff},
>> >> +    {147180000, 147180000, 1,  147, 2, 1, 1,  3, 0, 3, 4, 0, 0x2e147a},
>> >> +    {148352000, 148352000, 1,  98, 1, 1, 1,  1, 2, 2, 2, 0, 0xe6ae6b},
>> >> +    {148500000, 148500000, 1,  99, 1, 1, 1,  1, 2, 2, 2, 0, 0},
>> >> +    {154000000, 154000000, 1, 154, 2, 1, 1,  3, 0, 3, 4, 0, 0},
>> >> +    {156000000, 156000000, 1, 156, 2, 1, 1,  3, 0, 3, 4, 0, 0},
>> >> +    {157000000, 157000000, 1, 157, 2, 1, 1,  3, 0, 3, 4, 0, 0},
>> >> +    {162000000, 162000000, 1, 162, 2, 1, 1,  3, 0, 3, 4, 0, 0},
>> >> +    {174250000, 174250000, 1, 145, 3, 0, 0,  5, 0, 2, 2, 0, 0x355555},
>> >> +    {174500000, 174500000, 1, 174, 2, 1, 1,  3, 0, 3, 4, 0, 0x7fffff},
>> >> +    {174570000, 174570000, 1, 174, 2, 1, 1,  3, 0, 3, 4, 0, 0x91eb84},
>> >> +    {175500000, 175500000, 1, 175, 2, 1, 1,  3, 0, 3, 4, 0, 0x7fffff},
>> >> +    {185590000, 185590000, 1, 185, 2, 1, 1,  3, 0, 3, 4, 0, 0x970a3c},
>> >> +    {187000000, 187000000, 1, 187, 2, 1, 1,  3, 0, 3, 4, 0, 0},
>> >> +    {241500000, 241500000, 1, 161, 1, 1, 1,  4, 0, 2,  2, 0, 0},
>> >> +    {241700000, 241700000, 1, 241, 2, 1, 1,  3, 0, 3,  4, 0, 0xb33332},
>> >> +    {262750000, 262750000, 1, 262, 2, 1, 1,  3, 0, 3,  4, 0, 0xcfffff},
>> >> +    {296500000, 296500000, 1, 296, 2, 1, 1,  3, 0, 3,  4, 0, 0x7fffff},
>> >> +    {296703000, 296703000, 1,  98, 0, 1, 1,  1, 0, 2,  2, 0, 0xe6ae6b},
>> >> +    {297000000, 297000000, 1,  99, 0, 1, 1,  1, 0, 2,  2, 0, 0},
>> >> +    {594000000, 594000000, 1,  99, 0, 2, 0,  1, 0, 1,  1, 0, 0},
>> >> +    {0, 0, 0,  0, 0, 0, 0,  0, 0, 0,  0, 0, 0},
>> >> +};
>> >> +
>> >> +static const struct post_pll_config post_pll_cfg_table[] = {
>> >> +    {25200000,    1, 80, 13, 3, 1},
>> >> +    {27000000,    1, 40, 11, 3, 1},
>> >> +    {33750000,    1, 40, 11, 3, 1},
>> >> +    {49000000,    1, 20, 1, 3, 3},
>> >> +    {241700000, 1, 20, 1, 3, 3},
>> >> +    {297000000, 4, 20, 0, 0, 3},
>> >> +    {594000000, 4, 20, 0, 0, 0},
>> >> +    { /* sentinel */ }
>> >> +};
>> >> +
>> >> +inline u8 hdmi_readb(struct starfive_hdmi *hdmi, u16 offset)
>> >> +{
>> >> +    return readl_relaxed(hdmi->regs + (offset) * 0x04);
>> >> +}
>> >> +
>> >> +inline void hdmi_writeb(struct starfive_hdmi *hdmi, u16 offset, u32 val)
>> >> +{
>> >> +    writel_relaxed(val, hdmi->regs + (offset) * 0x04);
>> >> +}
>> >> +
>> >> +inline void hdmi_modb(struct starfive_hdmi *hdmi, u16 offset,
>> >> +                 u32 msk, u32 val)
>> >> +{
>> >> +    u8 temp = hdmi_readb(hdmi, offset) & ~msk;
>> >> +
>> >> +    temp |= val & msk;
>> >> +    hdmi_writeb(hdmi, offset, temp);
>> >> +}
>> >> +
>> >> +static int starfive_hdmi_enable_clk_deassert_rst(struct device *dev, struct starfive_hdmi *hdmi)
>> >> +{
>> >> +    int ret;
>> >> +
>> >> +    ret = clk_prepare_enable(hdmi->sys_clk);
>> >> +    if (ret) {
>> >> +        dev_err(dev, "Cannot enable HDMI sys clock: %d\n", ret);
>> >> +        return ret;
>> >> +    }
>> >> +
>> >> +    ret = clk_prepare_enable(hdmi->mclk);
>> >> +    if (ret) {
>> >> +        dev_err(dev, "Cannot enable HDMI mclk clock: %d\n", ret);
>> >> +        goto err_mclk;
>> >> +    }
>> >> +    ret = clk_prepare_enable(hdmi->bclk);
>> >
>> > This code begs to use clk_bulk instead.
>> >
>> >> +    if (ret) {
>> >> +        dev_err(dev, "Cannot enable HDMI bclk clock: %d\n", ret);
>> >> +        goto err_bclk;
>> >> +    }
>> >> +    ret = reset_control_deassert(hdmi->tx_rst);
>> >> +    if (ret < 0) {
>> >> +        dev_err(dev, "failed to deassert tx_rst\n");
>> >> +        goto err_rst;
>> >> +    }
>> >> +    return 0;
>> >> +
>> >> +err_rst:
>> >> +    clk_disable_unprepare(hdmi->bclk);
>> >> +err_bclk:
>> >> +    clk_disable_unprepare(hdmi->mclk);
>> >> +err_mclk:
>> >> +    clk_disable_unprepare(hdmi->sys_clk);
>> >> +    return ret;
>> >> +}
>> >> +
>> >> +static void starfive_hdmi_disable_clk_assert_rst(struct device *dev, struct starfive_hdmi *hdmi)
>> >> +{
>> >> +    int ret;
>> >> +
>> >> +    ret = reset_control_assert(hdmi->tx_rst);
>> >> +    if (ret < 0)
>> >> +        dev_err(dev, "failed to assert tx_rst\n");
>> >> +
>> >> +    clk_disable_unprepare(hdmi->sys_clk);
>> >> +    clk_disable_unprepare(hdmi->mclk);
>> >> +    clk_disable_unprepare(hdmi->bclk);
>> >> +}
>> >> +
>> >> +#ifdef CONFIG_PM_SLEEP
>> >> +static int hdmi_system_pm_suspend(struct device *dev)
>> >> +{
>> >> +    return pm_runtime_force_suspend(dev);
>> >> +}
>> >> +
>> >> +static int hdmi_system_pm_resume(struct device *dev)
>> >> +{
>> >> +    return pm_runtime_force_resume(dev);
>> >> +}
>> >> +#endif
>> >> +
>> >> +#ifdef CONFIG_PM
>> >> +static int hdmi_runtime_suspend(struct device *dev)
>> >> +{
>> >> +    struct starfive_hdmi *hdmi = dev_get_drvdata(dev);
>> >> +
>> >> +    starfive_hdmi_disable_clk_assert_rst(dev, hdmi);
>> >> +
>> >> +    return 0;
>> >> +}
>> >> +
>> >> +static int hdmi_runtime_resume(struct device *dev)
>> >> +{
>> >> +    struct starfive_hdmi *hdmi = dev_get_drvdata(dev);
>> >> +
>> >> +    return starfive_hdmi_enable_clk_deassert_rst(dev, hdmi);
>> >> +}
>> >> +#endif
>> >> +
>> >> +static void starfive_hdmi_tx_phy_power_down(struct starfive_hdmi *hdmi)
>> >> +{
>> >> +    hdmi_modb(hdmi, HDMI_SYS_CTRL, m_POWER, v_PWR_OFF);
>> >> +}
>> >> +
>> >> +static void starfive_hdmi_tx_phy_power_on(struct starfive_hdmi *hdmi)
>> >> +{
>> >> +    hdmi_modb(hdmi, HDMI_SYS_CTRL, m_POWER, v_PWR_ON);
>> >
>> > It looks like one can inline these two helpers w/o too much troubles.
>> >
>> >> +}
>> >> +
>> >> +static void starfive_hdmi_config_pll(struct starfive_hdmi *hdmi)
>> >> +{
>> >> +    u32 val;
>> >> +    u8 reg_1ad_value = hdmi->post_cfg->post_div_en ?
>> >> +         hdmi->post_cfg->postdiv : 0x00;
>> >> +    u8 reg_1aa_value = hdmi->post_cfg->post_div_en ?
>> >> +         0x0e : 0x02;
>> >> +
>> >> +    hdmi_writeb(hdmi, STARFIVE_PRE_PLL_CONTROL, STARFIVE_PRE_PLL_POWER_DOWN);
>> >> +    hdmi_writeb(hdmi, STARFIVE_POST_PLL_DIV_1,
>> >> +            STARFIVE_POST_PLL_POST_DIV_ENABLE |
>> >> +            STARFIVE_POST_PLL_REFCLK_SEL_TMDS |
>> >> +            STARFIVE_POST_PLL_POWER_DOWN);
>> >> +    hdmi_writeb(hdmi, STARFIVE_PRE_PLL_DIV_1, STARFIVE_PRE_PLL_PRE_DIV(hdmi->pre_cfg->prediv));
>> >> +
>> >> +    val = STARFIVE_SPREAD_SPECTRUM_MOD_DISABLE | STARFIVE_SPREAD_SPECTRUM_MOD_DOWN;
>> >> +    if (!hdmi->pre_cfg->fracdiv)
>> >> +        val |= STARFIVE_PRE_PLL_FRAC_DIV_DISABLE;
>> >> +    hdmi_writeb(hdmi, STARFIVE_PRE_PLL_DIV_2,
>> >> +            STARFIVE_PRE_PLL_FB_DIV_11_8(hdmi->pre_cfg->fbdiv) | val);
>> >> +    hdmi_writeb(hdmi, STARFIVE_PRE_PLL_DIV_3,
>> >> +            STARFIVE_PRE_PLL_FB_DIV_7_0(hdmi->pre_cfg->fbdiv));
>> >> +    hdmi_writeb(hdmi, STARFIVE_PRE_PLL_DIV_4,
>> >> +            STARFIVE_PRE_PLL_TMDSCLK_DIV_C(hdmi->pre_cfg->tmds_div_c) |
>> >> +            STARFIVE_PRE_PLL_TMDSCLK_DIV_A(hdmi->pre_cfg->tmds_div_a) |
>> >> +            STARFIVE_PRE_PLL_TMDSCLK_DIV_B(hdmi->pre_cfg->tmds_div_b));
>> >> +
>> >> +    if (hdmi->pre_cfg->fracdiv) {
>> >> +        hdmi_writeb(hdmi, STARFIVE_PRE_PLL_FRAC_DIV_L,
>> >> +                STARFIVE_PRE_PLL_FRAC_DIV_7_0(hdmi->pre_cfg->fracdiv));
>> >> +        hdmi_writeb(hdmi, STARFIVE_PRE_PLL_FRAC_DIV_M,
>> >> +                STARFIVE_PRE_PLL_FRAC_DIV_15_8(hdmi->pre_cfg->fracdiv));
>> >> +        hdmi_writeb(hdmi, STARFIVE_PRE_PLL_FRAC_DIV_H,
>> >> +                STARFIVE_PRE_PLL_FRAC_DIV_23_16(hdmi->pre_cfg->fracdiv));
>> >> +    }
>> >> +
>> >> +    hdmi_writeb(hdmi, STARFIVE_PRE_PLL_DIV_5,
>> >> +            STARFIVE_PRE_PLL_PCLK_DIV_A(hdmi->pre_cfg->pclk_div_a) |
>> >> +            STARFIVE_PRE_PLL_PCLK_DIV_B(hdmi->pre_cfg->pclk_div_b));
>> >> +    hdmi_writeb(hdmi, STARFIVE_PRE_PLL_DIV_6,
>> >> +            STARFIVE_PRE_PLL_PCLK_DIV_C(hdmi->pre_cfg->pclk_div_c) |
>> >> +            STARFIVE_PRE_PLL_PCLK_DIV_D(hdmi->pre_cfg->pclk_div_d));
>> >> +
>> >> +    /*pre-pll power down*/
>> >> +    hdmi_modb(hdmi, STARFIVE_PRE_PLL_CONTROL, STARFIVE_PRE_PLL_POWER_DOWN, 0);
>> >> +
>> >> +    hdmi_modb(hdmi, STARFIVE_POST_PLL_DIV_2, STARFIVE_POST_PLL_Pre_DIV_MASK,
>> >> +          STARFIVE_POST_PLL_PRE_DIV(hdmi->post_cfg->prediv));
>> >> +    hdmi_writeb(hdmi, STARFIVE_POST_PLL_DIV_3, hdmi->post_cfg->fbdiv & 0xff);
>> >> +    hdmi_writeb(hdmi, STARFIVE_POST_PLL_DIV_4, reg_1ad_value);
>> >> +    hdmi_writeb(hdmi, STARFIVE_POST_PLL_DIV_1, reg_1aa_value);
>> >> +}
>> >> +
>> >> +static void starfive_hdmi_tmds_driver_on(struct starfive_hdmi *hdmi)
>> >> +{
>> >> +    hdmi_modb(hdmi, STARFIVE_TMDS_CONTROL,
>> >> +          STARFIVE_TMDS_DRIVER_ENABLE, STARFIVE_TMDS_DRIVER_ENABLE);
>> >> +}
>> >> +
>> >> +static void starfive_hdmi_sync_tmds(struct starfive_hdmi *hdmi)
>> >> +{
>> >> +    /*first send 0 to this bit, then send 1 and keep 1 into this bit*/
>> >> +    hdmi_writeb(hdmi, HDMI_SYNC, 0x0);
>> >> +    hdmi_writeb(hdmi, HDMI_SYNC, 0x1);
>> >> +}
>> >> +
>> >> +static void starfive_hdmi_i2c_init(struct starfive_hdmi *hdmi)
>> >> +{
>> >> +    int ddc_bus_freq;
>> >> +
>> >> +    ddc_bus_freq = (clk_get_rate(hdmi->sys_clk) >> 2) / HDMI_SCL_RATE;
>> >> +
>> >> +    hdmi_writeb(hdmi, DDC_BUS_FREQ_L, ddc_bus_freq & 0xFF);
>> >> +    hdmi_writeb(hdmi, DDC_BUS_FREQ_H, (ddc_bus_freq >> 8) & 0xFF);
>> >> +
>> >> +    /* Clear the EDID interrupt flag and mute the interrupt */
>> >> +    hdmi_writeb(hdmi, HDMI_INTERRUPT_MASK1, 0);
>> >> +    hdmi_writeb(hdmi, HDMI_INTERRUPT_STATUS1, m_INT_EDID_READY);
>> >> +}
>> >> +
>> >> +static const
>> >> +struct pre_pll_config *starfive_hdmi_phy_get_pre_pll_cfg(struct starfive_hdmi *hdmi,
>> >> +                             unsigned long rate)
>> >> +{
>> >> +    const struct pre_pll_config *cfg = pre_pll_cfg_table;
>> >> +
>> >> +    rate = (rate / 1000) * 1000;
>> >> +    for (; cfg->pixclock != 0; cfg++)
>> >> +        if (cfg->tmdsclock == rate && cfg->pixclock == rate)
>> >> +            break;
>> >> +
>> >> +    if (cfg->pixclock == 0)
>> >> +        return ERR_PTR(-EINVAL);
>> >> +
>> >> +    return cfg;
>> >> +}
>> >> +
>> >> +static int starfive_hdmi_phy_clk_set_rate(struct starfive_hdmi *hdmi)
>> >> +{
>> >> +    hdmi->post_cfg = post_pll_cfg_table;
>> >> +
>> >> +    hdmi->pre_cfg = starfive_hdmi_phy_get_pre_pll_cfg(hdmi, hdmi->tmds_rate);
>> >> +    if (IS_ERR(hdmi->pre_cfg))
>> >> +        return PTR_ERR(hdmi->pre_cfg);
>> >> +
>> >> +    for (; hdmi->post_cfg->tmdsclock != 0; hdmi->post_cfg++)
>> >> +        if (hdmi->tmds_rate <= hdmi->post_cfg->tmdsclock)
>> >> +            break;
>> >> +
>> >> +    starfive_hdmi_config_pll(hdmi);
>> >> +
>> >> +    return 0;
>> >> +}
>> >> +
>> >> +static int starfive_hdmi_config_video_timing(struct starfive_hdmi *hdmi,
>> >> +                         struct drm_display_mode *mode)
>> >> +{
>> >> +    int value;
>> >> +    /* Set detail external video timing */
>> >> +    value = mode->htotal;
>> >> +    hdmi_writeb(hdmi, HDMI_VIDEO_EXT_HTOTAL_L, value & 0xFF);
>> >> +    hdmi_writeb(hdmi, HDMI_VIDEO_EXT_HTOTAL_H, (value >> 8) & 0xFF);
>> >
>> > As you have hdmi_writeb already, adding hdmi_writew will help here.
>> >
>> >> +
>> >> +    value = mode->htotal - mode->hdisplay;
>> >> +    hdmi_writeb(hdmi, HDMI_VIDEO_EXT_HBLANK_L, value & 0xFF);
>> >> +    hdmi_writeb(hdmi, HDMI_VIDEO_EXT_HBLANK_H, (value >> 8) & 0xFF);
>> >> +
>> >> +    value = mode->htotal - mode->hsync_start;
>> >> +    hdmi_writeb(hdmi, HDMI_VIDEO_EXT_HDELAY_L, value & 0xFF);
>> >> +    hdmi_writeb(hdmi, HDMI_VIDEO_EXT_HDELAY_H, (value >> 8) & 0xFF);
>> >> +
>> >> +    value = mode->hsync_end - mode->hsync_start;
>> >> +    hdmi_writeb(hdmi, HDMI_VIDEO_EXT_HDURATION_L, value & 0xFF);
>> >> +    hdmi_writeb(hdmi, HDMI_VIDEO_EXT_HDURATION_H, (value >> 8) & 0xFF);
>> >> +
>> >> +    value = mode->vtotal;
>> >> +    hdmi_writeb(hdmi, HDMI_VIDEO_EXT_VTOTAL_L, value & 0xFF);
>> >> +    hdmi_writeb(hdmi, HDMI_VIDEO_EXT_VTOTAL_H, (value >> 8) & 0xFF);
>> >> +
>> >> +    value = mode->vtotal - mode->vdisplay;
>> >> +    hdmi_writeb(hdmi, HDMI_VIDEO_EXT_VBLANK, value & 0xFF);
>> >> +
>> >> +    value = mode->vtotal - mode->vsync_start;
>> >> +    hdmi_writeb(hdmi, HDMI_VIDEO_EXT_VDELAY, value & 0xFF);
>> >> +
>> >> +    value = mode->vsync_end - mode->vsync_start;
>> >> +    hdmi_writeb(hdmi, HDMI_VIDEO_EXT_VDURATION, value & 0xFF);
>> >> +
>> >> +    /* Set detail external video timing polarity and interlace mode */
>> >> +    value = v_EXTERANL_VIDEO(1);
>> >> +    value |= mode->flags & DRM_MODE_FLAG_PHSYNC ?
>> >> +        v_HSYNC_POLARITY(1) : v_HSYNC_POLARITY(0);
>> >> +    value |= mode->flags & DRM_MODE_FLAG_PVSYNC ?
>> >> +        v_VSYNC_POLARITY(1) : v_VSYNC_POLARITY(0);
>> >> +    value |= mode->flags & DRM_MODE_FLAG_INTERLACE ?
>> >> +        v_INETLACE(1) : v_INETLACE(0);
>> >> +
>> >> +    hdmi_writeb(hdmi, HDMI_VIDEO_TIMING_CTL, value);
>> >> +    return 0;
>> >> +}
>> >> +
>> >> +static int starfive_hdmi_setup(struct starfive_hdmi *hdmi,
>> >> +                   struct drm_display_mode *mode)
>> >> +{
>> >> +    hdmi_modb(hdmi, STARFIVE_BIAS_CONTROL, STARFIVE_BIAS_ENABLE, STARFIVE_BIAS_ENABLE);
>> >> +    hdmi_writeb(hdmi, STARFIVE_RX_CONTROL, STARFIVE_RX_ENABLE);
>> >> +    hdmi->hdmi_data.vic = drm_match_cea_mode(mode);
>> >> +
>> >> +    hdmi->tmds_rate = mode->clock * 1000;
>> >> +    starfive_hdmi_phy_clk_set_rate(hdmi);
>> >> +
>> >> +    while (!(hdmi_readb(hdmi, STARFIVE_PRE_PLL_LOCK_STATUS) & 0x1))
>> >> +        continue;
>> >> +    while (!(hdmi_readb(hdmi, STARFIVE_POST_PLL_LOCK_STATUS) & 0x1))
>> >> +        continue;
>> >
>> > Please use read_iopoll_timeout here.
>> >
>> >> +
>> >> +    /*turn on LDO*/
>> >> +    hdmi_writeb(hdmi, STARFIVE_LDO_CONTROL, STARFIVE_LDO_ENABLE);
>> >> +    /*turn on serializer*/
>> >> +    hdmi_writeb(hdmi, STARFIVE_SERIALIER_CONTROL, STARFIVE_SERIALIER_ENABLE);
>> >> +
>> >> +    starfive_hdmi_tx_phy_power_down(hdmi);
>> >> +    starfive_hdmi_config_video_timing(hdmi, mode);
>> >> +    starfive_hdmi_tx_phy_power_on(hdmi);
>> >> +
>> >> +    starfive_hdmi_tmds_driver_on(hdmi);
>> >> +    starfive_hdmi_sync_tmds(hdmi);
>> >> +
>> >> +    return 0;
>> >> +}
>> >> +
>> >> +static void starfive_hdmi_encoder_mode_set(struct drm_encoder *encoder,
>> >> +                       struct drm_display_mode *mode,
>> >> +                       struct drm_display_mode *adj_mode)
>> >> +{
>> >> +    struct starfive_hdmi *hdmi = encoder_to_hdmi(encoder);
>> >> +
>> >> +    drm_mode_copy(&hdmi->previous_mode, adj_mode);
>> >
>> > Why do you need it?
>> >
>> >> +}
>> >> +
>> >> +static void starfive_hdmi_encoder_enable(struct drm_encoder *encoder)
>> >> +{
>> >> +    struct starfive_hdmi *hdmi = encoder_to_hdmi(encoder);
>> >> +    struct drm_display_mode *mode = &encoder->crtc->state->adjusted_mode;
>> >> +    int ret, idx;
>> >> +    struct drm_device *drm = hdmi->connector.dev;
>> >> +
>> >> +    if (drm && !drm_dev_enter(drm, &idx))
>> >> +        return;
>> >> +
>> >> +    ret = pm_runtime_get_sync(hdmi->dev);
>> >> +    if (ret < 0)
>> >> +        return;
>> >> +    mdelay(10);
>> >> +    starfive_hdmi_setup(hdmi, mode);
>> >> +
>> >> +    if (drm)
>> >> +        drm_dev_exit(idx);
>> >> +}
>> >> +
>> >> +static void starfive_hdmi_encoder_disable(struct drm_encoder *encoder)
>> >> +{
>> >> +    struct starfive_hdmi *hdmi = encoder_to_hdmi(encoder);
>> >> +
>> >> +    int idx;
>> >> +    struct drm_device *drm = hdmi->connector.dev;
>> >> +
>> >> +    if (drm && !drm_dev_enter(drm, &idx))
>> >> +        return;
>> >> +
>> >> +    pm_runtime_put(hdmi->dev);
>> >> +
>> >> +    if (drm)
>> >> +        drm_dev_exit(idx);
>> >> +}
>> >> +
>> >> +static int
>> >> +starfive_hdmi_encoder_atomic_check(struct drm_encoder *encoder,
>> >> +                   struct drm_crtc_state *crtc_state,
>> >> +                   struct drm_connector_state *conn_state)
>> >> +{
>> >> +    bool valid = false;
>> >> +    struct drm_display_mode *mode = &crtc_state->adjusted_mode;
>> >> +    struct vs_crtc_state *vs_crtc_state = to_vs_crtc_state(crtc_state);
>> >> +
>> >> +    vs_crtc_state->encoder_type = encoder->encoder_type;
>> >> +    vs_crtc_state->output_fmt = MEDIA_BUS_FMT_RGB888_1X24;
>> >> +
>> >> +    const struct pre_pll_config *cfg = pre_pll_cfg_table;
>> >> +    int pclk = mode->clock * 1000;
>> >> +
>> >> +    for (; cfg->pixclock != 0; cfg++) {
>> >> +        if (pclk == cfg->pixclock) {
>> >> +            if (pclk > 297000000)
>> >
>> > Magic value.
>> >
>> >> +                continue;
>> >> +
>> >> +            valid = true;
>> >> +            break;
>> >> +        }
>> >> +    }
>> >> +
>> >> +    return (valid) ? 0 : -EINVAL;
>> >> +}
>> >> +
>> >> +static const struct drm_encoder_helper_funcs starfive_hdmi_encoder_helper_funcs = {
>> >> +    .enable     = starfive_hdmi_encoder_enable,
>> >> +    .disable    = starfive_hdmi_encoder_disable,
>> >> +    .mode_set   = starfive_hdmi_encoder_mode_set,
>> >> +    .atomic_check = starfive_hdmi_encoder_atomic_check,
>> >> +};
>> >> +
>> >> +static enum drm_connector_status
>> >> +starfive_hdmi_connector_detect(struct drm_connector *connector, bool force)
>> >> +{
>> >> +    struct starfive_hdmi *hdmi = connector_to_hdmi(connector);
>> >> +    struct drm_device *drm = hdmi->connector.dev;
>> >> +    int ret;
>> >> +    int idx;
>> >> +
>> >> +    if (drm && !drm_dev_enter(drm, &idx))
>> >> +        return connector_status_disconnected;
>> >> +
>> >> +    ret = pm_runtime_get_sync(hdmi->dev);
>> >> +    if (ret < 0)
>> >> +        return ret;
>> >> +
>> >> +    ret = (hdmi_readb(hdmi, HDMI_STATUS) & m_HOTPLUG) ?
>> >> +        connector_status_connected : connector_status_disconnected;
>> >> +    pm_runtime_put(hdmi->dev);
>> >> +
>> >> +    if (drm)
>> >> +        drm_dev_exit(idx);
>> >> +
>> >> +    return ret;
>> >> +}
>> >> +
>> >> +static int starfive_hdmi_connector_get_modes(struct drm_connector *connector)
>> >> +{
>> >> +    struct starfive_hdmi *hdmi = connector_to_hdmi(connector);
>> >> +    struct edid *edid;
>> >> +    int ret = 0;
>> >> +
>> >> +    if (!hdmi->ddc)
>> >> +        return 0;
>> >> +    ret = pm_runtime_get_sync(hdmi->dev);
>> >> +    if (ret < 0)
>> >> +        return ret;
>> >> +
>> >> +    edid = drm_get_edid(connector, hdmi->ddc);
>> >> +    if (edid) {
>> >> +        hdmi->hdmi_data.sink_is_hdmi = drm_detect_hdmi_monitor(edid);
>> >> +        hdmi->hdmi_data.sink_has_audio = drm_detect_monitor_audio(edid);
>> >> +        drm_connector_update_edid_property(connector, edid);
>> >> +        ret = drm_add_edid_modes(connector, edid);
>> >> +        kfree(edid);
>> >> +    }
>> >> +    pm_runtime_put(hdmi->dev);
>> >
>> > Can you use drm_connector_helper_get_modes_from_ddc() here? And then drm_display_info.is_hdmi and .has_audio.
>> >
>> >> +
>> >> +    return ret;
>> >> +}
>> >> +
>> >> +static enum drm_mode_status
>> >> +starfive_hdmi_connector_mode_valid(struct drm_connector *connector,
>> >> +                   struct drm_display_mode *mode)
>> >> +{
>> >> +    const struct pre_pll_config *cfg = pre_pll_cfg_table;
>> >> +    int pclk = mode->clock * 1000;
>> >> +    bool valid = false;
>> >> +
>> >> +    for (; cfg->pixclock != 0; cfg++) {
>> >> +        if (pclk == cfg->pixclock) {
>> >> +            if (pclk > 297000000)
>> >
>> > magic value
>> >
>> >> +                continue;
>> >> +
>> >> +            valid = true;
>> >> +            break;
>> >> +        }
>> >> +    }
>> >> +
>> >> +    return (valid) ? MODE_OK : MODE_BAD;
>> >> +}
>> >> +
>> >> +static int
>> >> +starfive_hdmi_probe_single_connector_modes(struct drm_connector *connector,
>> >> +                       u32 maxX, u32 maxY)
>> >> +{
>> >> +    return drm_helper_probe_single_connector_modes(connector, 3840, 2160);
>> >> +}
>> >> +
>> >> +static const struct drm_connector_funcs starfive_hdmi_connector_funcs = {
>> >> +    .fill_modes = starfive_hdmi_probe_single_connector_modes,
>> >> +    .detect = starfive_hdmi_connector_detect,
>> >> +    .reset = drm_atomic_helper_connector_reset,
>> >> +    .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
>> >> +    .atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
>> >> +};
>> >> +
>> >> +static struct drm_connector_helper_funcs starfive_hdmi_connector_helper_funcs = {
>> >> +    .get_modes = starfive_hdmi_connector_get_modes,
>> >> +    .mode_valid = starfive_hdmi_connector_mode_valid,
>> >> +};
>> >> +
>> >> +static int starfive_hdmi_register(struct drm_device *drm, struct starfive_hdmi *hdmi)
>> >> +{
>> >> +    struct drm_encoder *encoder = &hdmi->encoder;
>> >> +    struct device *dev = hdmi->dev;
>> >> +
>> >> +    encoder->possible_crtcs = drm_of_find_possible_crtcs(drm, dev->of_node);
>> >> +
>> >> +    /*
>> >> +     * If we failed to find the CRTC(s) which this encoder is
>> >> +     * supposed to be connected to, it's because the CRTC has
>> >> +     * not been registered yet.  Defer probing, and hope that
>> >> +     * the required CRTC is added later.
>> >> +     */
>> >> +    if (encoder->possible_crtcs == 0)
>> >> +        return -EPROBE_DEFER;
>> >> +
>> >> +    drm_encoder_helper_add(encoder, &starfive_hdmi_encoder_helper_funcs);
>> >> +
>> >> +    hdmi->connector.polled = DRM_CONNECTOR_POLL_HPD;
>> >> +
>> >> +    drm_connector_helper_add(&hdmi->connector,
>> >> +                 &starfive_hdmi_connector_helper_funcs);
>> >> +    drmm_connector_init(drm, &hdmi->connector,
>> >> +                &starfive_hdmi_connector_funcs,
>> >> +                DRM_MODE_CONNECTOR_HDMIA,
>> >
>> > On an embedded device one can not be so sure. There can be MHL or HDMI Alternative Mode. Usually we use drm_bridge here and drm_bridge_connector.
>> >
>> >> +                hdmi->ddc);
>> >> +
>> >> +    drm_connector_attach_encoder(&hdmi->connector, encoder);
>> >> +
>> >> +    return 0;
>> >> +}
>> >> +
>> >> +static irqreturn_t starfive_hdmi_i2c_irq(struct starfive_hdmi *hdmi)
>> >> +{
>> >> +    struct starfive_hdmi_i2c *i2c = hdmi->i2c;
>> >> +    u8 stat;
>> >> +
>> >> +    stat = hdmi_readb(hdmi, HDMI_INTERRUPT_STATUS1);
>> >> +    if (!(stat & m_INT_EDID_READY))
>> >> +        return IRQ_NONE;
>> >> +
>> >> +    /* Clear HDMI EDID interrupt flag */
>> >> +    hdmi_writeb(hdmi, HDMI_INTERRUPT_STATUS1, m_INT_EDID_READY);
>> >> +
>> >> +    complete(&i2c->cmp);
>> >> +
>> >> +    return IRQ_HANDLED;
>> >> +}
>> >> +
>> >> +static irqreturn_t starfive_hdmi_hardirq(int irq, void *dev_id)
>> >> +{
>> >> +    struct starfive_hdmi *hdmi = dev_id;
>> >> +    irqreturn_t ret = IRQ_NONE;
>> >> +    u8 interrupt;
>> >> +
>> >> +    if (hdmi->i2c)
>> >> +        ret = starfive_hdmi_i2c_irq(hdmi);
>> >> +
>> >> +    interrupt = hdmi_readb(hdmi, HDMI_STATUS);
>> >> +    if (interrupt & m_INT_HOTPLUG) {
>> >> +        hdmi_modb(hdmi, HDMI_STATUS, m_INT_HOTPLUG, m_INT_HOTPLUG);
>> >> +        ret = IRQ_WAKE_THREAD;
>> >> +    }
>> >> +
>> >> +    return ret;
>> >> +}
>> >> +
>> >> +static irqreturn_t starfive_hdmi_irq(int irq, void *dev_id)
>> >> +{
>> >> +    struct starfive_hdmi *hdmi = dev_id;
>> >> +
>> >> +    drm_connector_helper_hpd_irq_event(&hdmi->connector);
>> >> +
>> >> +    return IRQ_HANDLED;
>> >> +}
>> >> +
>> >> +static int starfive_hdmi_i2c_read(struct starfive_hdmi *hdmi, struct i2c_msg *msgs)
>> >> +{
>> >> +    int length = msgs->len;
>> >> +    u8 *buf = msgs->buf;
>> >> +    int ret;
>> >> +
>> >> +    ret = wait_for_completion_timeout(&hdmi->i2c->cmp, HZ / 10);
>> >
>> > read_poll_timeout
>> Hi Dmitry:
>> I think using wait_for_completion_timeout here is a bit clearer than read_poll_timeout logic
>> I2c_read has hardware interrupt dependency. so need wait the interrupt completion.
>> also it comes with timeout detection.
> 
> Hi,
> 
> Yes, maybe I was thinking about a different piece of code here.
> wait_for_completion looks good here, indeed.
> 
> But this actually brings up another question. You reinit_comletion in
> starfive_hdmi_i2c_write() and then wait_for_completion in
> starfive_hdmi_i2c_read(). How does that work?
> 
> 
struct i2c_msg msgs[2] = {
        {
            .addr = DDC_ADDR,
            .flags = 0,
            .len = 1,
            .buf = (void *)&start,
        },{
            .addr = DDC_ADDR,
            .flags = I2C_M_RD,
            .len = DATA_LEN,
            .buf = buf,
        }
    };

For i2c devices, when reading edid information, the master device needs to send two msg to the slave device. 
The first msg contains the write operation flag(0), the written data length (start length) and the register address that needs to be read (start addr) ; 
The second msg contains the required read operation (I2C_M_RD), the length of the read data (equal to the length of buf) and the address (buf) where the data is read.

the first msg call starfive_hdmi_i2c_write 
and the second call starfive_hdmi_i2c_read

after the first msg send done , A valid interrupt will be generated (complete) ,then  the second msg will continue to read(wait_for_completion)
so that is the reason why nend do the reinit_comletion in starfive_hdmi_i2c_write.
if not do that , the second msg maybe read the edid at a wrong time.

This is my understanding. If there is anything wrong, I hope you will be corrected.

Thanks
> 
>>
>> >
>> >> +    if (!ret)
>> >> +        return -EAGAIN;
>> >> +
>> >> +    while (length--)
>> >> +        *buf++ = hdmi_readb(hdmi, HDMI_EDID_FIFO_ADDR);
>> >> +
>> >> +    return 0;
>> >> +}
>> >> +
>> >> +static int starfive_hdmi_i2c_write(struct starfive_hdmi *hdmi, struct i2c_msg *msgs)
>> >> +{
>> >> +    /*
>> >> +     * The DDC module only support read EDID message, so
>> >> +     * we assume that each word write to this i2c adapter
>> >> +     * should be the offset of EDID word address.
>> >> +     */
>> >> +    if (msgs->len != 1 ||
>> >> +        (msgs->addr != DDC_ADDR && msgs->addr != DDC_SEGMENT_ADDR))
>> >> +        return -EINVAL;
>> >> +
>> >> +    reinit_completion(&hdmi->i2c->cmp);
>> >> +
>> >> +    if (msgs->addr == DDC_SEGMENT_ADDR)
>> >> +        hdmi->i2c->segment_addr = msgs->buf[0];
>> >> +    if (msgs->addr == DDC_ADDR)
>> >> +        hdmi->i2c->ddc_addr = msgs->buf[0];
>> >> +
>> >> +    /* Set edid fifo first addr */
>> >> +    hdmi_writeb(hdmi, HDMI_EDID_FIFO_OFFSET, 0x00);
>> >> +
>> >> +    /* Set edid word address 0x00/0x80 */
>> >> +    hdmi_writeb(hdmi, HDMI_EDID_WORD_ADDR, hdmi->i2c->ddc_addr);
>> >> +
>> >> +    /* Set edid segment pointer */
>> >> +    hdmi_writeb(hdmi, HDMI_EDID_SEGMENT_POINTER, hdmi->i2c->segment_addr);
>> >> +
>> >> +    return 0;
>> >> +}
>> >> +
>> >> +static int starfive_hdmi_i2c_xfer(struct i2c_adapter *adap,
>> >> +                  struct i2c_msg *msgs, int num)
>> >> +{
>> >> +    struct starfive_hdmi *hdmi = i2c_get_adapdata(adap);
>> >> +    struct starfive_hdmi_i2c *i2c = hdmi->i2c;
>> >> +    int i, ret = 0;
>> >> +
>> >> +    mutex_lock(&i2c->lock);
>> >> +
>> >> +    /* Clear the EDID interrupt flag and unmute the interrupt */
>> >> +    hdmi_writeb(hdmi, HDMI_INTERRUPT_MASK1, m_INT_EDID_READY);
>> >> +    hdmi_writeb(hdmi, HDMI_INTERRUPT_STATUS1, m_INT_EDID_READY);
>> >> +
>> >> +    for (i = 0; i < num; i++) {
>> >> +        DRM_DEV_DEBUG(hdmi->dev,
>> >> +                  "xfer: num: %d/%d, len: %d, flags: %#x\n",
>> >> +                  i + 1, num, msgs[i].len, msgs[i].flags);
>> >> +
>> >> +        if (msgs[i].flags & I2C_M_RD)
>> >> +            ret = starfive_hdmi_i2c_read(hdmi, &msgs[i]);
>> >> +        else
>> >> +            ret = starfive_hdmi_i2c_write(hdmi, &msgs[i]);
>> >> +
>> >> +        if (ret < 0)
>> >> +            break;
>> >> +    }
>> >> +
>> >> +    if (!ret)
>> >> +        ret = num;
>> >> +
>> >> +    /* Mute HDMI EDID interrupt */
>> >> +    hdmi_writeb(hdmi, HDMI_INTERRUPT_MASK1, 0);
>> >> +
>> >> +    mutex_unlock(&i2c->lock);
>> >> +
>> >> +    return ret;
>> >> +}
>> >> +
>> >> +static u32 starfive_hdmi_i2c_func(struct i2c_adapter *adapter)
>> >> +{
>> >> +    return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
>> >> +}
>> >> +
>> >> +static const struct i2c_algorithm starfive_hdmi_algorithm = {
>> >> +    .master_xfer    = starfive_hdmi_i2c_xfer,
>> >> +    .functionality    = starfive_hdmi_i2c_func,
>> >> +};
>> >> +
>> >> +static struct i2c_adapter *starfive_hdmi_i2c_adapter(struct starfive_hdmi *hdmi)
>> >> +{
>> >> +    struct i2c_adapter *adap;
>> >> +    struct starfive_hdmi_i2c *i2c;
>> >> +    int ret;
>> >> +
>> >> +    i2c = drmm_kzalloc(hdmi->drm_dev, sizeof(*i2c), GFP_KERNEL);
>> >> +    if (!i2c)
>> >> +        return ERR_PTR(-ENOMEM);
>> >> +
>> >> +    mutex_init(&i2c->lock);
>> >> +    init_completion(&i2c->cmp);
>> >> +
>> >> +    adap = &i2c->adap;
>> >> +    adap->class = I2C_CLASS_DDC;
>> >> +    adap->owner = THIS_MODULE;
>> >> +    adap->dev.parent = hdmi->dev;
>> >> +    adap->algo = &starfive_hdmi_algorithm;
>> >> +    strscpy(adap->name, "Starfive HDMI", sizeof(adap->name));
>> >> +    i2c_set_adapdata(adap, hdmi);
>> >> +
>> >> +    ret = devm_i2c_add_adapter(hdmi->dev, adap);
>> >> +    if (ret) {
>> >> +        drm_warn(hdmi->drm_dev, "cannot add %s I2C adapter\n", adap->name);
>> >> +        return ERR_PTR(ret);
>> >> +    }
>> >> +
>> >> +    hdmi->i2c = i2c;
>> >> +
>> >> +    drm_info(hdmi->drm_dev, "registered %s I2C bus driver success\n", adap->name);
>> >> +
>> >> +    return adap;
>> >> +}
>> >> +
>> >> +static int starfive_hdmi_get_clk_rst(struct device *dev, struct starfive_hdmi *hdmi)
>> >> +{
>> >> +    hdmi->sys_clk = devm_clk_get(dev, "sysclk");
>> >> +    if (IS_ERR(hdmi->sys_clk)) {
>> >> +        dev_err(dev, "Unable to get HDMI sysclk clk\n");
>> >> +        return PTR_ERR(hdmi->sys_clk);
>> >> +    }
>> >> +    hdmi->mclk = devm_clk_get(dev, "mclk");
>> >> +    if (IS_ERR(hdmi->mclk)) {
>> >> +        dev_err(dev, "Unable to get HDMI mclk clk\n");
>> >> +        return PTR_ERR(hdmi->mclk);
>> >> +    }
>> >> +    hdmi->bclk = devm_clk_get(dev, "bclk");
>> >> +    if (IS_ERR(hdmi->bclk)) {
>> >> +        dev_err(dev, "Unable to get HDMI bclk clk\n");
>> >> +        return PTR_ERR(hdmi->bclk);
>> >> +    }
>> >> +    hdmi->tx_rst = devm_reset_control_get_by_index(dev, 0);
>> >> +    if (IS_ERR(hdmi->tx_rst)) {
>> >> +        dev_err(dev, "failed to get tx_rst reset\n");
>> >> +        return PTR_ERR(hdmi->tx_rst);
>> >> +    }
>> >> +
>> >> +    return 0;
>> >> +}
>> >> +
>> >> +static int starfive_hdmi_bind(struct device *dev, struct device *master,
>> >> +                  void *data)
>> >> +{
>> >> +    struct platform_device *pdev = to_platform_device(dev);
>> >> +    struct drm_device *drm = dev_get_drvdata(master);
>> >> +    struct starfive_hdmi *hdmi;
>> >> +    struct resource *iores;
>> >> +    int irq;
>> >> +    int ret;
>> >> +
>> >> +    hdmi = drmm_kzalloc(drm, sizeof(*hdmi), GFP_KERNEL);
>> >> +    if (!hdmi)
>> >> +        return -ENOMEM;
>> >> +
>> >> +    hdmi = drmm_simple_encoder_alloc(drm, struct starfive_hdmi,
>> >> +                     encoder, DRM_MODE_ENCODER_TMDS);
>> >> +
>> >> +    hdmi->dev = dev;
>> >> +    hdmi->drm_dev = drm;
>> >> +    dev_set_drvdata(dev, hdmi);
>> >> +
>> >> +    iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>> >> +    hdmi->regs = devm_ioremap_resource(dev, iores);
>> >
>> > This should go to probe
>> >
>> >> +    if (IS_ERR(hdmi->regs))
>> >> +        return PTR_ERR(hdmi->regs);
>> >> +
>> >> +    ret = starfive_hdmi_get_clk_rst(dev, hdmi);
>> >> +    if (ret < 0)
>> >> +        return ret;
>> >
>> > And this
>> >
>> >> +
>> >> +    ret = devm_pm_runtime_enable(dev);
>> >> +    if (ret)
>> >> +        return ret;
>> >> +
>> >> +    ret = pm_runtime_resume_and_get(dev);
>> >> +    if (ret)
>> >> +        return ret;
>> >> +
>> >> +    irq = platform_get_irq(pdev, 0);
>> >
>> > And this
>> >
>> >> +    if (irq < 0) {
>> >> +        ret = irq;
>> >> +        goto err_put_runtime_pm;
>> >> +    }
>> >> +
>> >> +    hdmi->ddc = starfive_hdmi_i2c_adapter(hdmi);
>> >> +    if (IS_ERR(hdmi->ddc)) {
>> >> +        ret = PTR_ERR(hdmi->ddc);
>> >> +        hdmi->ddc = NULL;
>> >> +        goto err_put_runtime_pm;
>> >> +    }
>> >> +
>> >> +    starfive_hdmi_i2c_init(hdmi);
>> >> +
>> >> +    ret = starfive_hdmi_register(drm, hdmi);
>> >> +    if (ret)
>> >> +        goto err_put_adapter;
>> >> +
>> >> +    /* Unmute hotplug interrupt */
>> >> +    hdmi_modb(hdmi, HDMI_STATUS, m_MASK_INT_HOTPLUG, v_MASK_INT_HOTPLUG(1));
>> >> +
>> >> +    ret = devm_request_threaded_irq(dev, irq, starfive_hdmi_hardirq,
>> >> +                    starfive_hdmi_irq, IRQF_SHARED,
>> >> +                    dev_name(dev), hdmi);
>> >> +    if (ret < 0)
>> >> +        goto err_put_adapter;
>> >> +
>> >> +    pm_runtime_put_sync(dev);
>> >> +
>> >> +    return 0;
>> >> +
>> >> +err_put_adapter:
>> >> +    i2c_put_adapter(hdmi->ddc);
>> >> +err_put_runtime_pm:
>> >> +    pm_runtime_put_sync(dev);
>> >> +
>> >> +    return ret;
>> >> +}
>> >> +
>> >> +static const struct component_ops starfive_hdmi_ops = {
>> >> +    .bind    = starfive_hdmi_bind,
>> >> +};
>> >> +
>> >> +static int starfive_hdmi_probe(struct platform_device *pdev)
>> >> +{
>> >> +    return component_add(&pdev->dev, &starfive_hdmi_ops);
>> >> +}
>> >> +
>> >> +static int starfive_hdmi_remove(struct platform_device *pdev)
>> >> +{
>> >> +    component_del(&pdev->dev, &starfive_hdmi_ops);
>> >> +
>> >> +    return 0;
>> >> +}
>> >> +
>> >> +static const struct dev_pm_ops hdmi_pm_ops = {
>> >> +    SET_RUNTIME_PM_OPS(hdmi_runtime_suspend, hdmi_runtime_resume, NULL)
>> >> +    SET_LATE_SYSTEM_SLEEP_PM_OPS(hdmi_system_pm_suspend, hdmi_system_pm_resume)
>> >> +};
>> >> +
>> >> +static const struct of_device_id starfive_hdmi_dt_ids[] = {
>> >> +    { .compatible = "starfive,jh7110-inno-hdmi",},
>> >> +    {},
>> >> +};
>> >> +MODULE_DEVICE_TABLE(of, starfive_hdmi_dt_ids);
>> >> +
>> >> +struct platform_driver starfive_hdmi_driver = {
>> >> +    .probe  = starfive_hdmi_probe,
>> >> +    .remove = starfive_hdmi_remove,
>> >> +    .driver = {
>> >> +        .name = "starfive-hdmi",
>> >> +        .of_match_table = starfive_hdmi_dt_ids,
>> >> +        .pm = &hdmi_pm_ops,
>> >> +    },
>> >> +};
>> >> +
>> >> +MODULE_AUTHOR("StarFive Corporation");
>> >> +MODULE_DESCRIPTION("Starfive HDMI Driver");
>> >> diff --git a/drivers/gpu/drm/verisilicon/starfive_hdmi.h b/drivers/gpu/drm/verisilicon/starfive_hdmi.h
>> >> new file mode 100644
>> >> index 000000000..1b9a11bca
>> >> --- /dev/null
>> >> +++ b/drivers/gpu/drm/verisilicon/starfive_hdmi.h
>> >> @@ -0,0 +1,295 @@
>> >> +/* SPDX-License-Identifier: GPL-2.0-only */
>> >> +/*
>> >> + * Copyright (C) 2023 StarFive Technology Co., Ltd.
>> >> + */
>> >> +
>> >> +#ifndef __STARFIVE_HDMI_H__
>> >> +#define __STARFIVE_HDMI_H__
>> >> +
>> >> +#include <drm/bridge/dw_hdmi.h>
>> >> +#include <drm/drm_atomic_helper.h>
>> >> +#include <drm/drm_edid.h>
>> >> +#include <drm/drm_of.h>
>> >> +#include <drm/drm_probe_helper.h>
>> >> +#include <drm/drm_simple_kms_helper.h>
>> >> +#include <linux/bitfield.h>
>> >> +#include <linux/bits.h>
>> >> +
>> >> +#define DDC_SEGMENT_ADDR        0x30
>> >> +
>> >> +#define HDMI_SCL_RATE            (100 * 1000)
>> >> +#define DDC_BUS_FREQ_L            0x4b
>> >> +#define DDC_BUS_FREQ_H            0x4c
>> >> +
>> >> +#define HDMI_SYS_CTRL            0x00
>> >> +#define m_RST_ANALOG            BIT(6)
>> >> +#define v_RST_ANALOG            0
>> >> +#define v_NOT_RST_ANALOG        BIT(6)
>> >> +#define m_RST_DIGITAL            BIT(5)
>> >> +#define v_RST_DIGITAL            0
>> >> +#define v_NOT_RST_DIGITAL        BIT(5)
>> >> +#define m_REG_CLK_INV            BIT(4)
>> >> +#define v_REG_CLK_NOT_INV        0
>> >> +#define v_REG_CLK_INV            BIT(4)
>> >> +#define m_VCLK_INV            BIT(3)
>> >> +#define v_VCLK_NOT_INV            0
>> >> +#define v_VCLK_INV            BIT(3)
>> >> +#define m_REG_CLK_SOURCE        BIT(2)
>> >> +#define v_REG_CLK_SOURCE_TMDS        0
>> >> +#define v_REG_CLK_SOURCE_SYS        BIT(2)
>> >> +#define m_POWER                BIT(1)
>> >> +#define v_PWR_ON            0
>> >> +#define v_PWR_OFF            BIT(1)
>> >> +#define m_INT_POL            BIT(0)
>> >> +#define v_INT_POL_HIGH            1
>> >> +#define v_INT_POL_LOW            0
>> >> +
>> >> +#define HDMI_AV_MUTE            0x05
>> >> +#define m_AVMUTE_CLEAR            BIT(7)
>> >> +#define m_AVMUTE_ENABLE            BIT(6)
>> >> +#define m_AUDIO_MUTE            BIT(1)
>> >> +#define m_VIDEO_BLACK            BIT(0)
>> >> +#define v_AVMUTE_CLEAR(n)        ((n) << 7)
>> >> +#define v_AVMUTE_ENABLE(n)        ((n) << 6)
>> >> +#define v_AUDIO_MUTE(n)            ((n) << 1)
>> >> +#define v_VIDEO_MUTE(n)            ((n) << 0)
>> >> +
>> >> +#define HDMI_VIDEO_TIMING_CTL        0x08
>> >> +#define v_VSYNC_POLARITY(n)        ((n) << 3)
>> >> +#define v_HSYNC_POLARITY(n)        ((n) << 2)
>> >> +#define v_INETLACE(n)            ((n) << 1)
>> >> +#define v_EXTERANL_VIDEO(n)        ((n) << 0)
>> >> +
>> >> +#define HDMI_VIDEO_EXT_HTOTAL_L        0x09
>> >> +#define HDMI_VIDEO_EXT_HTOTAL_H        0x0a
>> >> +#define HDMI_VIDEO_EXT_HBLANK_L        0x0b
>> >> +#define HDMI_VIDEO_EXT_HBLANK_H        0x0c
>> >> +#define HDMI_VIDEO_EXT_HDELAY_L        0x0d
>> >> +#define HDMI_VIDEO_EXT_HDELAY_H        0x0e
>> >> +#define HDMI_VIDEO_EXT_HDURATION_L    0x0f
>> >> +#define HDMI_VIDEO_EXT_HDURATION_H    0x10
>> >> +#define HDMI_VIDEO_EXT_VTOTAL_L        0x11
>> >> +#define HDMI_VIDEO_EXT_VTOTAL_H        0x12
>> >> +#define HDMI_VIDEO_EXT_VBLANK        0x13
>> >> +#define HDMI_VIDEO_EXT_VDELAY        0x14
>> >> +#define HDMI_VIDEO_EXT_VDURATION    0x15
>> >> +
>> >> +#define HDMI_EDID_SEGMENT_POINTER    0x4d
>> >> +#define HDMI_EDID_WORD_ADDR        0x4e
>> >> +#define HDMI_EDID_FIFO_OFFSET        0x4f
>> >> +#define HDMI_EDID_FIFO_ADDR        0x50
>> >> +
>> >> +#define HDMI_INTERRUPT_MASK1        0xc0
>> >> +#define HDMI_INTERRUPT_STATUS1        0xc1
>> >> +#define    m_INT_ACTIVE_VSYNC        BIT(5)
>> >> +#define m_INT_EDID_READY        BIT(2)
>> >> +
>> >> +#define HDMI_STATUS            0xc8
>> >> +#define m_HOTPLUG            BIT(7)
>> >> +#define m_MASK_INT_HOTPLUG        BIT(5)
>> >> +#define m_INT_HOTPLUG            BIT(1)
>> >> +#define v_MASK_INT_HOTPLUG(n)        (((n) & 0x1) << 5)
>> >
>> > It is untypical to have field defines which start with lowercase letter.
>> >
>> >> +
>> >> +#define HDMI_SYNC                    0xce
>> >> +
>> >> +#define UPDATE(x, h, l)                    FIELD_PREP(GENMASK(h, l), x)
>> >> +
>> >> +/* REG: 0x1a0 */
>> >> +#define STARFIVE_PRE_PLL_CONTROL            0x1a0
>> >> +#define STARFIVE_PCLK_VCO_DIV_5_MASK            BIT(1)
>> >> +#define STARFIVE_PCLK_VCO_DIV_5(x)            UPDATE(x, 1, 1)
>> >> +#define STARFIVE_PRE_PLL_POWER_DOWN            BIT(0)
>> >> +
>> >> +/* REG: 0x1a1 */
>> >> +#define STARFIVE_PRE_PLL_DIV_1                0x1a1
>> >> +#define STARFIVE_PRE_PLL_PRE_DIV_MASK            GENMASK(5, 0)
>> >> +#define STARFIVE_PRE_PLL_PRE_DIV(x)            UPDATE(x, 5, 0)
>> >> +
>> >> +/* REG: 0x1a2 */
>> >> +#define STARFIVE_PRE_PLL_DIV_2                0x1a2
>> >> +#define STARFIVE_SPREAD_SPECTRUM_MOD_DOWN        BIT(7)
>> >> +#define STARFIVE_SPREAD_SPECTRUM_MOD_DISABLE        BIT(6)
>> >> +#define STARFIVE_PRE_PLL_FRAC_DIV_DISABLE        UPDATE(3, 5, 4)
>> >> +#define STARFIVE_PRE_PLL_FB_DIV_11_8_MASK        GENMASK(3, 0)
>> >> +#define STARFIVE_PRE_PLL_FB_DIV_11_8(x)            UPDATE((x) >> 8, 3, 0)
>> >> +
>> >> +/* REG: 0x1a3 */
>> >> +#define STARFIVE_PRE_PLL_DIV_3                0x1a3
>> >> +#define STARFIVE_PRE_PLL_FB_DIV_7_0(x)            UPDATE(x, 7, 0)
>> >> +
>> >> +/* REG: 0x1a4*/
>> >> +#define STARFIVE_PRE_PLL_DIV_4                0x1a4
>> >> +#define STARFIVE_PRE_PLL_TMDSCLK_DIV_C_MASK        GENMASK(1, 0)
>> >> +#define STARFIVE_PRE_PLL_TMDSCLK_DIV_C(x)        UPDATE(x, 1, 0)
>> >> +#define STARFIVE_PRE_PLL_TMDSCLK_DIV_B_MASK        GENMASK(3, 2)
>> >> +#define STARFIVE_PRE_PLL_TMDSCLK_DIV_B(x)        UPDATE(x, 3, 2)
>> >> +#define STARFIVE_PRE_PLL_TMDSCLK_DIV_A_MASK        GENMASK(5, 4)
>> >> +#define STARFIVE_PRE_PLL_TMDSCLK_DIV_A(x)        UPDATE(x, 5, 4)
>> >> +
>> >> +/* REG: 0x1a5 */
>> >> +#define STARFIVE_PRE_PLL_DIV_5                0x1a5
>> >> +#define STARFIVE_PRE_PLL_PCLK_DIV_B_SHIFT        5
>> >> +#define STARFIVE_PRE_PLL_PCLK_DIV_B_MASK        GENMASK(6, 5)
>> >> +#define STARFIVE_PRE_PLL_PCLK_DIV_B(x)            UPDATE(x, 6, 5)
>> >> +#define STARFIVE_PRE_PLL_PCLK_DIV_A_MASK        GENMASK(4, 0)
>> >> +#define STARFIVE_PRE_PLL_PCLK_DIV_A(x)            UPDATE(x, 4, 0)
>> >> +
>> >> +/* REG: 0x1a6 */
>> >> +#define STARFIVE_PRE_PLL_DIV_6                0x1a6
>> >> +#define STARFIVE_PRE_PLL_PCLK_DIV_C_SHIFT        5
>> >> +#define STARFIVE_PRE_PLL_PCLK_DIV_C_MASK        GENMASK(6, 5)
>> >> +#define STARFIVE_PRE_PLL_PCLK_DIV_C(x)            UPDATE(x, 6, 5)
>> >> +#define STARFIVE_PRE_PLL_PCLK_DIV_D_MASK        GENMASK(4, 0)
>> >> +#define STARFIVE_PRE_PLL_PCLK_DIV_D(x)            UPDATE(x, 4, 0)
>> >> +
>> >> +/* REG: 0x1a9 */
>> >> +#define STARFIVE_PRE_PLL_LOCK_STATUS            0x1a9
>> >> +
>> >> +/* REG: 0x1aa */
>> >> +#define STARFIVE_POST_PLL_DIV_1                0x1aa
>> >> +#define STARFIVE_POST_PLL_POST_DIV_ENABLE        GENMASK(3, 2)
>> >> +#define STARFIVE_POST_PLL_REFCLK_SEL_TMDS        BIT(1)
>> >> +#define STARFIVE_POST_PLL_POWER_DOWN            BIT(0)
>> >> +#define STARFIVE_POST_PLL_FB_DIV_8(x)            UPDATE(((x) >> 8) << 4, 4, 4)
>> >> +
>> >> +/* REG:0x1ab */
>> >> +#define STARFIVE_POST_PLL_DIV_2                0x1ab
>> >> +#define STARFIVE_POST_PLL_Pre_DIV_MASK            GENMASK(5, 0)
>> >> +#define STARFIVE_POST_PLL_PRE_DIV(x)            UPDATE(x, 5, 0)
>> >> +
>> >> +/* REG: 0x1ac */
>> >> +#define STARFIVE_POST_PLL_DIV_3                0x1ac
>> >> +#define STARFIVE_POST_PLL_FB_DIV_7_0(x)            UPDATE(x, 7, 0)
>> >> +
>> >> +/* REG: 0x1ad */
>> >> +#define STARFIVE_POST_PLL_DIV_4                0x1ad
>> >> +#define STARFIVE_POST_PLL_POST_DIV_MASK            GENMASK(2, 0)
>> >> +#define STARFIVE_POST_PLL_POST_DIV_2            0x0
>> >> +#define STARFIVE_POST_PLL_POST_DIV_4            0x1
>> >> +#define STARFIVE_POST_PLL_POST_DIV_8            0x3
>> >> +
>> >> +/* REG: 0x1af */
>> >> +#define STARFIVE_POST_PLL_LOCK_STATUS            0x1af
>> >> +
>> >> +/* REG: 0x1b0 */
>> >> +#define STARFIVE_BIAS_CONTROL                0x1b0
>> >> +#define STARFIVE_BIAS_ENABLE                BIT(2)
>> >> +
>> >> +/* REG: 0x1b2 */
>> >> +#define STARFIVE_TMDS_CONTROL                0x1b2
>> >> +#define STARFIVE_TMDS_CLK_DRIVER_EN            BIT(3)
>> >> +#define STARFIVE_TMDS_D2_DRIVER_EN            BIT(2)
>> >> +#define STARFIVE_TMDS_D1_DRIVER_EN            BIT(1)
>> >> +#define STARFIVE_TMDS_D0_DRIVER_EN            BIT(0)
>> >> +#define STARFIVE_TMDS_DRIVER_ENABLE            (STARFIVE_TMDS_CLK_DRIVER_EN | \
>> >> +                             STARFIVE_TMDS_D2_DRIVER_EN | \
>> >> +                             STARFIVE_TMDS_D1_DRIVER_EN | \
>> >> +                             STARFIVE_TMDS_D0_DRIVER_EN)
>> >> +
>> >> +/* REG: 0x1b4 */
>> >> +#define STARFIVE_LDO_CONTROL                0x1b4
>> >> +#define STARFIVE_LDO_D2_EN                BIT(2)
>> >> +#define STARFIVE_LDO_D1_EN                BIT(1)
>> >> +#define STARFIVE_LDO_D0_EN                BIT(0)
>> >> +#define STARFIVE_LDO_ENABLE                (STARFIVE_LDO_D2_EN | \
>> >> +                             STARFIVE_LDO_D1_EN | \
>> >> +                             STARFIVE_LDO_D0_EN)
>> >> +
>> >> +/* REG: 0x1be */
>> >> +#define STARFIVE_SERIALIER_CONTROL            0x1be
>> >> +#define STARFIVE_SERIALIER_D2_EN            BIT(6)
>> >> +#define STARFIVE_SERIALIER_D1_EN            BIT(5)
>> >> +#define STARFIVE_SERIALIER_D0_EN            BIT(4)
>> >> +#define STARFIVE_SERIALIER_EN                BIT(0)
>> >> +
>> >> +#define STARFIVE_SERIALIER_ENABLE            (STARFIVE_SERIALIER_D2_EN | \
>> >> +                             STARFIVE_SERIALIER_D1_EN | \
>> >> +                             STARFIVE_SERIALIER_D0_EN | \
>> >> +                             STARFIVE_SERIALIER_EN)
>> >> +
>> >> +/* REG: 0x1cc */
>> >> +#define STARFIVE_RX_CONTROL                0x1cc
>> >> +#define STARFIVE_RX_EN                    BIT(3)
>> >> +#define STARFIVE_RX_CHANNEL_2_EN            BIT(2)
>> >> +#define STARFIVE_RX_CHANNEL_1_EN            BIT(1)
>> >> +#define STARFIVE_RX_CHANNEL_0_EN            BIT(0)
>> >> +#define STARFIVE_RX_ENABLE                (STARFIVE_RX_EN | \
>> >> +                             STARFIVE_RX_CHANNEL_2_EN | \
>> >> +                             STARFIVE_RX_CHANNEL_1_EN | \
>> >> +                             STARFIVE_RX_CHANNEL_0_EN)
>> >> +
>> >> +/* REG: 0x1d1 */
>> >> +#define STARFIVE_PRE_PLL_FRAC_DIV_H            0x1d1
>> >> +#define STARFIVE_PRE_PLL_FRAC_DIV_23_16(x)        UPDATE((x) >> 16, 7, 0)
>> >> +/* REG: 0x1d2 */
>> >> +#define STARFIVE_PRE_PLL_FRAC_DIV_M            0x1d2
>> >> +#define STARFIVE_PRE_PLL_FRAC_DIV_15_8(x)        UPDATE((x) >> 8, 7, 0)
>> >> +/* REG: 0x1d3 */
>> >> +#define STARFIVE_PRE_PLL_FRAC_DIV_L            0x1d3
>> >> +#define STARFIVE_PRE_PLL_FRAC_DIV_7_0(x)        UPDATE(x, 7, 0)
>> >> +
>> >> +struct pre_pll_config {
>> >> +    unsigned long pixclock;
>> >> +    unsigned long tmdsclock;
>> >> +    u8 prediv;
>> >> +    u16 fbdiv;
>> >> +    u8 tmds_div_a;
>> >> +    u8 tmds_div_b;
>> >> +    u8 tmds_div_c;
>> >> +    u8 pclk_div_a;
>> >> +    u8 pclk_div_b;
>> >> +    u8 pclk_div_c;
>> >> +    u8 pclk_div_d;
>> >> +    u8 vco_div_5_en;
>> >> +    u32 fracdiv;
>> >> +};
>> >> +
>> >> +struct post_pll_config {
>> >> +    unsigned long tmdsclock;
>> >> +    u8 prediv;
>> >> +    u16 fbdiv;
>> >> +    u8 postdiv;
>> >> +    u8 post_div_en;
>> >> +    u8 version;
>> >> +};
>> >> +
>> >> +struct phy_config {
>> >> +    unsigned long    tmdsclock;
>> >> +    u8        regs[14];
>> >> +};
>> >> +
>> >> +struct hdmi_data_info {
>> >> +    int vic;
>> >> +    bool sink_is_hdmi;
>> >> +    bool sink_has_audio;
>> >> +    unsigned int enc_in_format;
>> >> +    unsigned int enc_out_format;
>> >> +    unsigned int colorimetry;
>> >> +};
>> >> +
>> >> +struct starfive_hdmi {
>> >> +    struct device *dev;
>> >> +    struct drm_device *drm_dev;
>> >> +    struct drm_encoder    encoder;
>> >> +    struct drm_connector    connector;
>> >> +
>> >> +    struct starfive_hdmi_i2c *i2c;
>> >> +
>> >> +    int irq;
>> >> +    struct clk *sys_clk;
>> >> +    struct clk *mclk;
>> >> +    struct clk *bclk;
>> >> +    struct reset_control *tx_rst;
>> >> +    void __iomem *regs;
>> >> +
>> >> +    struct i2c_adapter *ddc;
>> >> +
>> >> +    unsigned long tmds_rate;
>> >> +
>> >> +    struct hdmi_data_info    hdmi_data;
>> >> +    struct drm_display_mode previous_mode;
>> >> +    const struct pre_pll_config    *pre_cfg;
>> >> +    const struct post_pll_config    *post_cfg;
>> >> +};
>> >> +
>> >> +#endif /* __STARFIVE_HDMI_H__ */
>> >> diff --git a/drivers/gpu/drm/verisilicon/vs_drv.c b/drivers/gpu/drm/verisilicon/vs_drv.c
>> >> index 3cd533cfa..9669354bd 100644
>> >> --- a/drivers/gpu/drm/verisilicon/vs_drv.c
>> >> +++ b/drivers/gpu/drm/verisilicon/vs_drv.c
>> >> @@ -126,6 +126,11 @@ static const struct component_master_ops vs_drm_ops = {
>> >>   static struct platform_driver *drm_sub_drivers[] = {
>> >>       &dc_platform_driver,
>> >>   +    /* connector + encoder*/
>> >> +#ifdef CONFIG_DRM_VERISILICON_STARFIVE_HDMI
>> >> +    &starfive_hdmi_driver,
>> >> +#endif
>> >> +
>> >>   };
>> >>     static struct component_match *vs_drm_match_add(struct device *dev)
>> >> diff --git a/drivers/gpu/drm/verisilicon/vs_drv.h b/drivers/gpu/drm/verisilicon/vs_drv.h
>> >> index 369ad22d6..e90723419 100644
>> >> --- a/drivers/gpu/drm/verisilicon/vs_drv.h
>> >> +++ b/drivers/gpu/drm/verisilicon/vs_drv.h
>> >> @@ -24,4 +24,8 @@ to_vs_drm_private(const struct drm_device *dev)
>> >>       return container_of(dev, struct vs_drm_device, base);
>> >>   }
>> >>   +#ifdef CONFIG_DRM_VERISILICON_STARFIVE_HDMI
>> >> +extern struct platform_driver starfive_hdmi_driver;
>> >> +#endif
>> >> +
>> >>   #endif /* __VS_DRV_H__ */
>> >
> 
> 
> 




[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux