Hi Esker, On Tue, Nov 07, 2023 at 01:06:20PM +0800, Esker Wong wrote: > [send again in text mode] > Hi Sakari, > > Sequence number is important to us. We need it to measure the latency > from this event to the time we display the frame. I think we could also add the sequence number to V4L2_EVENT_VSYNC. Cc Hans. > On Mon, Nov 6, 2023 at 7:06 PM Sakari Ailus <sakari.ailus@xxxxxx> wrote: > > > > Hi Ricardo, > > > > On Mon, Nov 06, 2023 at 10:52:27AM +0000, Ricardo Ribalda wrote: > > > Add support for the frame_sync event, so user-space can become aware > > > earlier of new frames. > > > > > > Suggested-by: Esker Wong <esker@xxxxxxxxxxxx> > > > Tested-by: Esker Wong <esker@xxxxxxxxxxxx> > > > Signed-off-by: Ricardo Ribalda <ribalda@xxxxxxxxxxxx> > > > --- > > > We have measured a latency of around 30msecs between frame sync > > > and dqbuf. > > > --- > > > Changes in v2: > > > - Suggested by Laurent. Split sequence++ and event init. > > > - Link to v1: https://lore.kernel.org/r/20231020-uvc-event-v1-1-3baa0e9f6952@xxxxxxxxxxxx > > > --- > > > drivers/media/usb/uvc/uvc_v4l2.c | 2 ++ > > > drivers/media/usb/uvc/uvc_video.c | 7 +++++++ > > > 2 files changed, 9 insertions(+) > > > > > > diff --git a/drivers/media/usb/uvc/uvc_v4l2.c b/drivers/media/usb/uvc/uvc_v4l2.c > > > index f4988f03640a..9f3fb5fd2375 100644 > > > --- a/drivers/media/usb/uvc/uvc_v4l2.c > > > +++ b/drivers/media/usb/uvc/uvc_v4l2.c > > > @@ -1352,6 +1352,8 @@ static int uvc_ioctl_subscribe_event(struct v4l2_fh *fh, > > > switch (sub->type) { > > > case V4L2_EVENT_CTRL: > > > return v4l2_event_subscribe(fh, sub, 0, &uvc_ctrl_sub_ev_ops); > > > + case V4L2_EVENT_FRAME_SYNC: > > > + return v4l2_event_subscribe(fh, sub, 0, NULL); > > > default: > > > return -EINVAL; > > > } > > > diff --git a/drivers/media/usb/uvc/uvc_video.c b/drivers/media/usb/uvc/uvc_video.c > > > index 28dde08ec6c5..4f3a510ca4fe 100644 > > > --- a/drivers/media/usb/uvc/uvc_video.c > > > +++ b/drivers/media/usb/uvc/uvc_video.c > > > @@ -1073,9 +1073,16 @@ static int uvc_video_decode_start(struct uvc_streaming *stream, > > > * that discontinuous sequence numbers always indicate lost frames. > > > */ > > > if (stream->last_fid != fid) { > > > + struct v4l2_event event = { > > > + .type = V4L2_EVENT_FRAME_SYNC, > > > + }; > > > + > > > stream->sequence++; > > > if (stream->sequence) > > > uvc_video_stats_update(stream); > > > + > > > + event.u.frame_sync.frame_sequence = stream->sequence, > > > + v4l2_event_queue(&stream->vdev, &event); > > > > uvc_video_decode_start() is called when the reception of the entire frame > > has been completed. However, the documentation for V4L2_EVENT_FRAME_SYNC > > says that the event is "Triggered immediately when the reception of a frame > > has begun.". The functionality here doesn't seem to fit to this patch. > > > > Wouldn't V4L2_EVENT_VSYNC be a better fit, even if we don't really have a > > concept of vertical sync in the case of USB? That event doesn't have the > > sequence though but I guess it's not an issue at least if your case. > > > > Another technically correct option could be to create a new event for this > > but I'm not sure it's worth it. > > > > > } > > > > > > uvc_video_clock_decode(stream, buf, data, len); > > > > > > > -- > > Regards, > > > > Sakari Ailus -- Regards, Sakari Ailus
