[PATCH 3/4] media: ov13b10: Enable runtime PM before registering async sub-device

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Bingbu Cao <bingbu.cao@xxxxxxxxx>

As the sensor device maybe accessible right after its async sub-device is
registered, such as ipu-bridge will try to power up sensor by sensor's client
device's runtime PM from the async notifier callback, if runtime PM is not
enabled, it will fail.

So runtime PM should be ready before its async sub-device is registered
and accessible by others.

Signed-off-by: Bingbu Cao <bingbu.cao@xxxxxxxxx>
---
 drivers/media/i2c/ov13b10.c | 14 +++++++++-----
 1 file changed, 9 insertions(+), 5 deletions(-)

diff --git a/drivers/media/i2c/ov13b10.c b/drivers/media/i2c/ov13b10.c
index dbc642c5995b..f5c6d4a5ae0b 100644
--- a/drivers/media/i2c/ov13b10.c
+++ b/drivers/media/i2c/ov13b10.c
@@ -1536,24 +1536,28 @@ static int ov13b10_probe(struct i2c_client *client)
 		goto error_handler_free;
 	}
 
-	ret = v4l2_async_register_subdev_sensor(&ov13b->sd);
-	if (ret < 0)
-		goto error_media_entity;
 
 	/*
 	 * Device is already turned on by i2c-core with ACPI domain PM.
 	 * Enable runtime PM and turn off the device.
 	 */
-
 	/* Set the device's state to active if it's in D0 state. */
 	if (full_power)
 		pm_runtime_set_active(&client->dev);
 	pm_runtime_enable(&client->dev);
+
+	ret = v4l2_async_register_subdev_sensor(&ov13b->sd);
+	if (ret < 0)
+		goto error_media_entity_runtime_pm;
+
 	pm_runtime_idle(&client->dev);
 
 	return 0;
 
-error_media_entity:
+error_media_entity_runtime_pm:
+	pm_runtime_disable(&client->dev);
+	if (full_power)
+		pm_runtime_set_suspended(&client->dev);
 	media_entity_cleanup(&ov13b->sd.entity);
 
 error_handler_free:
-- 
2.42.0




[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux