As the sensor may be accessible right after its async sub-device is registered, enable runtime PM before doing so. Signed-off-by: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx> --- drivers/media/i2c/imx319.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/drivers/media/i2c/imx319.c b/drivers/media/i2c/imx319.c index 5378f607f340..f8bce161318d 100644 --- a/drivers/media/i2c/imx319.c +++ b/drivers/media/i2c/imx319.c @@ -2464,19 +2464,21 @@ static int imx319_probe(struct i2c_client *client) goto error_handler_free; } - ret = v4l2_async_register_subdev_sensor(&imx319->sd); - if (ret < 0) - goto error_media_entity; - /* Set the device's state to active if it's in D0 state. */ if (full_power) pm_runtime_set_active(&client->dev); pm_runtime_enable(&client->dev); pm_runtime_idle(&client->dev); + ret = v4l2_async_register_subdev_sensor(&imx319->sd); + if (ret < 0) + goto error_media_entity_pm; + return 0; -error_media_entity: +error_media_entity_pm: + pm_runtime_disable(&client->dev); + pm_runtime_set_suspended(&client->dev); media_entity_cleanup(&imx319->sd.entity); error_handler_free: -- 2.39.2
