Re: [PATCH v13 00/56] Add DELETE_BUF ioctl

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Benjamin,

On 19/10/2023 14:51, Benjamin Gaignard wrote:
> Unlike when resolution change on keyframes, dynamic resolution change
> on inter frames doesn't allow to do a stream off/on sequence because
> it is need to keep all previous references alive to decode inter frames.
> This constraint have two main problems:
> - more memory consumption.
> - more buffers in use.
> To solve these issue this series introduce DELETE_BUFS ioctl and remove
> the 32 buffers limit per queue.
> 
> VP9 conformance tests using fluster give a score of 210/305.
> The 20 resize inter tests (vp90-2-21-resize_inter_* files) are ok
> but require to use postprocessor.
> 
> Kernel branch is available here:
> https://gitlab.collabora.com/benjamin.gaignard/for-upstream/-/commits/remove_vb2_queue_limit_v13
> 
> GStreamer branch to use DELETE_BUF ioctl and testing dynamic resolution
> change is here:
> https://gitlab.freedesktop.org/benjamin.gaignard1/gstreamer/-/commits/VP9_drc
> 

I'll just write the comments here since I never received patch 44 in my mailbox.
The messages are sent too quickly and my provider just throws some away if that
happens for a long series like this, very annoying. You can configure git to
slow down sending emails, if you can look into that, then that would be great.
It seems to happen whenever more than approx. 30-35 patches are sent off very
quickly.

In any case, a v14 is needed: when testing with -virtme and the patched v4l2-compliance
it fails the 32 bit test. You need to add max_num_buffers support to
drivers/media/v4l2-core/v4l2-compat-ioctl32.c.

And since a v14 is needed because of that it would be nice if you can also
make two small changes to patch 44/56:

The commit log still refers to V4L2_BUF_CAP_SUPPORTS_SET_MAX_BUFS (the old
name). And in v4l_print_create_buffers() you log the value as "max buffers",
just make that "max num buffers" for consistency.

Regards,

	Hans

> changes in version 13:
> - Fix typo and wording in commits messages.
> - Only apply V4L2_BUF_CAP_SUPPORTS_SET_MAX_BUFS on createbufs ioctl
> - Fix queue setup test in test-drivers
> 
> changes in version 12:
> - Change flag name to V4L2_BUF_CAP_SUPPORTS_SET_MAX_BUFS.
> - Rework some commits message.
> - Change vb2_queue_or_prepare_buf() prototype.
> - Rework patches where 'min_buffers_needed' was badly used.
> 
> changes in version 11:
> - Patches ordering:
>   1 to 3: clean up
>   3 to 42: use vb2_get_buffer() and vb2_get_num_buffers()
>   43 to 46: allow to use more than 32 buffers per queue
>   47 to 50: allow verisilicon driver to do VP9 dynamic resolution change
>             (which was the main purpose of this work)
>   51 to 56: prepare and introduce delete buffers feature.
> - Add a patch to rename 'off' to offset.
> - Add maintainers CC to drivers patches
> 
> changes in version 10:
> - Make BUFFER_INDEX_MASK definition more readable
> - Rebase on media_stage/master branch and add a patch for nuvoton
>   driver.
> - Fix issue on patch 13
> 
> changes in version 9:
> - BUFFER_INDEX_MASK now depends on PAGE_SHIFT value to match
>   architectures requirements.
> - Correctly initialize max_num_buffers in vb2_core_queue_init()
> - run 'test-media -kmemleak mc' on top of the series and on patches 1 to 47 without failures.
> - fix compilation issue in patch 50
> 
> 
> 
>  
> Benjamin Gaignard (56):
>   media: videobuf2: Rename offset parameter
>   media: videobuf2: Rework offset 'cookie' encoding pattern
>   media: videobuf2: Stop spamming kernel log with all queue counter
>   media: videobuf2: Use vb2_buffer instead of index
>   media: videobuf2: Access vb2_queue bufs array through helper functions
>   media: videobuf2: Remove duplicated index vs q->num_buffers check
>   media: videobuf2: Add helper to get queue number of buffers
>   media: videobuf2: Use vb2_get_num_buffers() helper
>   media: amphion: Use vb2_get_buffer() instead of directly access to
>     buffers array
>   media: amphion: Stop direct calls to queue num_buffers field
>   media: mediatek: jpeg: Use vb2_get_buffer() instead of directly access
>     to buffers array
>   media: mediatek: vdec: Remove useless loop
>   media: mediatek: vcodec: Stop direct calls to queue num_buffers field
>   media: sti: hva: Use vb2_get_buffer() instead of directly access to
>     buffers array
>   media: visl: Use vb2_get_buffer() instead of directly access to
>     buffers array
>   media: atomisp: Use vb2_get_buffer() instead of directly access to
>     buffers array
>   media: atomisp: Stop direct calls to queue num_buffers field
>   media: dvb-core: Use vb2_get_buffer() instead of directly access to
>     buffers array
>   media: dvb-core: Do not initialize twice queue num_buffer field
>   media: dvb-frontends: rtl2832: Stop direct calls to queue num_buffers
>     field
>   media: pci: dt3155: Remove useless check
>   media: pci: tw686x: Stop direct calls to queue num_buffers field
>   media: pci: cx18: Stop direct calls to queue num_buffers field
>   media: pci: netup_unidvb: Stop direct calls to queue num_buffers field
>   media: pci: tw68: Stop direct calls to queue num_buffers field
>   media: i2c: video-i2c: Stop direct calls to queue num_buffers field
>   media: coda: Stop direct calls to queue num_buffers field
>   media: nxp: Stop direct calls to queue num_buffers field
>   media: verisilicon: Stop direct calls to queue num_buffers field
>   media: test-drivers: Stop direct calls to queue num_buffers field
>   media: imx: Stop direct calls to queue num_buffers field
>   media: meson: vdec: Stop direct calls to queue num_buffers field
>   touchscreen: sur40: Stop direct calls to queue num_buffers field
>   sample: v4l: Stop direct calls to queue num_buffers field
>   media: cedrus: Stop direct calls to queue num_buffers field
>   media: nuvoton: Stop direct calls to queue num_buffers field
>   media: renesas: Stop direct calls to queue num_buffers field
>   media: ti: Stop direct calls to queue num_buffers field
>   media: usb: airspy: Stop direct calls to queue num_buffers field
>   media: usb: cx231xx: Stop direct calls to queue num_buffers field
>   media: usb: hackrf: Stop direct calls to queue num_buffers field
>   media: usb: usbtv: Stop direct calls to queue num_buffers field
>   media: videobuf2: Be more flexible on the number of queue stored
>     buffers
>   media: core: Report the maximum possible number of buffers for the
>     queue
>   media: test-drivers: vivid: Increase max supported buffers for capture
>     queues
>   media: test-drivers: vicodec: Increase max supported capture queue
>     buffers
>   media: verisilicon: Refactor postprocessor to store more buffers
>   media: verisilicon: Store chroma and motion vectors offset
>   media: verisilicon: g2: Use common helpers to compute chroma and mv
>     offsets
>   media: verisilicon: vp9: Allow to change resolution while streaming
>   media: core: Rework how create_buf index returned value is computed
>   media: core: Add bitmap manage bufs array entries
>   media: core: Free range of buffers
>   media: v4l2: Add DELETE_BUFS ioctl
>   media: v4l2: Add mem2mem helpers for DELETE_BUFS ioctl
>   media: test-drivers: Use helper for DELETE_BUFS ioctl
> 
>  .../userspace-api/media/v4l/user-func.rst     |   1 +
>  .../media/v4l/vidioc-create-bufs.rst          |   8 +-
>  .../media/v4l/vidioc-delete-bufs.rst          |  80 +++
>  .../media/v4l/vidioc-reqbufs.rst              |   2 +
>  drivers/input/touchscreen/sur40.c             |   5 +-
>  .../media/common/videobuf2/videobuf2-core.c   | 569 +++++++++++-------
>  .../media/common/videobuf2/videobuf2-v4l2.c   | 125 ++--
>  drivers/media/dvb-core/dvb_vb2.c              |  17 +-
>  drivers/media/dvb-frontends/rtl2832_sdr.c     |   5 +-
>  drivers/media/i2c/video-i2c.c                 |   5 +-
>  drivers/media/pci/cx18/cx18-streams.c         |   5 +-
>  drivers/media/pci/dt3155/dt3155.c             |   2 -
>  .../pci/netup_unidvb/netup_unidvb_core.c      |   5 +-
>  drivers/media/pci/tw68/tw68-video.c           |   4 +-
>  drivers/media/pci/tw686x/tw686x-video.c       |   5 +-
>  drivers/media/platform/amphion/vpu_dbg.c      |  30 +-
>  drivers/media/platform/amphion/vpu_v4l2.c     |   4 +-
>  .../media/platform/chips-media/coda-common.c  |   2 +-
>  .../platform/mediatek/jpeg/mtk_jpeg_core.c    |   7 +-
>  .../vcodec/decoder/vdec/vdec_vp9_req_lat_if.c |   9 +-
>  .../mediatek/vcodec/encoder/mtk_vcodec_enc.c  |   2 +-
>  drivers/media/platform/nuvoton/npcm-video.c   |   2 +-
>  drivers/media/platform/nxp/imx7-media-csi.c   |   7 +-
>  drivers/media/platform/renesas/rcar_drif.c    |   5 +-
>  drivers/media/platform/st/sti/hva/hva-v4l2.c  |   9 +-
>  .../media/platform/ti/am437x/am437x-vpfe.c    |   5 +-
>  drivers/media/platform/ti/cal/cal-video.c     |   5 +-
>  .../media/platform/ti/davinci/vpif_capture.c  |   5 +-
>  .../media/platform/ti/davinci/vpif_display.c  |   5 +-
>  drivers/media/platform/ti/omap/omap_vout.c    |   5 +-
>  drivers/media/platform/verisilicon/hantro.h   |   9 +-
>  .../media/platform/verisilicon/hantro_drv.c   |   5 +-
>  .../media/platform/verisilicon/hantro_g2.c    |  14 +
>  .../platform/verisilicon/hantro_g2_hevc_dec.c |  18 +-
>  .../platform/verisilicon/hantro_g2_vp9_dec.c  |  28 +-
>  .../media/platform/verisilicon/hantro_hw.h    |   7 +-
>  .../platform/verisilicon/hantro_postproc.c    |  93 ++-
>  .../media/platform/verisilicon/hantro_v4l2.c  |  27 +-
>  .../media/test-drivers/vicodec/vicodec-core.c |   3 +
>  drivers/media/test-drivers/vim2m.c            |   2 +
>  .../media/test-drivers/vimc/vimc-capture.c    |   2 +
>  drivers/media/test-drivers/visl/visl-dec.c    |  32 +-
>  drivers/media/test-drivers/visl/visl-video.c  |   2 +
>  drivers/media/test-drivers/vivid/vivid-core.c |  21 +
>  .../media/test-drivers/vivid/vivid-meta-cap.c |   3 -
>  .../media/test-drivers/vivid/vivid-meta-out.c |   5 +-
>  .../test-drivers/vivid/vivid-touch-cap.c      |   5 +-
>  .../media/test-drivers/vivid/vivid-vbi-cap.c  |   3 -
>  .../media/test-drivers/vivid/vivid-vbi-out.c  |   3 -
>  .../media/test-drivers/vivid/vivid-vid-cap.c  |   3 -
>  .../media/test-drivers/vivid/vivid-vid-out.c  |   5 +-
>  drivers/media/usb/airspy/airspy.c             |   5 +-
>  drivers/media/usb/cx231xx/cx231xx-417.c       |   5 +-
>  drivers/media/usb/cx231xx/cx231xx-video.c     |   5 +-
>  drivers/media/usb/hackrf/hackrf.c             |   5 +-
>  drivers/media/usb/usbtv/usbtv-video.c         |   5 +-
>  drivers/media/v4l2-core/v4l2-dev.c            |   1 +
>  drivers/media/v4l2-core/v4l2-ioctl.c          |  21 +-
>  drivers/media/v4l2-core/v4l2-mem2mem.c        |  20 +
>  .../staging/media/atomisp/pci/atomisp_ioctl.c |   4 +-
>  drivers/staging/media/imx/imx-media-capture.c |   7 +-
>  drivers/staging/media/meson/vdec/vdec.c       |  13 +-
>  .../staging/media/sunxi/cedrus/cedrus_h264.c  |   9 +-
>  .../staging/media/sunxi/cedrus/cedrus_h265.c  |   9 +-
>  include/media/v4l2-ioctl.h                    |   4 +
>  include/media/v4l2-mem2mem.h                  |  12 +
>  include/media/videobuf2-core.h                |  65 +-
>  include/media/videobuf2-v4l2.h                |  13 +
>  include/uapi/linux/videodev2.h                |  24 +-
>  samples/v4l/v4l2-pci-skeleton.c               |   5 +-
>  70 files changed, 990 insertions(+), 472 deletions(-)
>  create mode 100644 Documentation/userspace-api/media/v4l/vidioc-delete-bufs.rst
> 




[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux