Hi all, This series add support for Allied Vision Alvium camera. The Alvium camera is shipped with sensor + isp in the same housing. The camera can be equipped with one out of various sensor and abstract the user from this. Camera is connected via MIPI CSI-2. Driver use latest V4L2_CCI_I2C API. https://www.alliedvision.com/en/products/embedded-vision-solutions/ Tested the following alvium models: - alvium 1500 C-500c - alvium 1800 C-2050c - alvium 1800 C-1240c - alvium 1800 C-040c - alvium 1800 C-052c - alvium 1800 C-240m Note: - Driver is rebased on top of [1], commit [2]. Thanks & Regards, Tommaso - [1] https://git.linuxtv.org/sailus/media_tree.git/log/ - [2] media: Documentation: LP-11 and LP-111 are states, not modes (c9a1b0b583db) Tommaso Merciai (3): dt-bindings: vendor-prefixes: Add prefix alliedvision media: dt-bindings: alvium: add document YAML binding media: i2c: Add support for alvium camera .../media/i2c/alliedvision,alvium-csi2.yaml | 81 + .../devicetree/bindings/vendor-prefixes.yaml | 2 + MAINTAINERS | 9 + drivers/media/i2c/Kconfig | 10 + drivers/media/i2c/Makefile | 1 + drivers/media/i2c/alvium-csi2.c | 2630 +++++++++++++++++ drivers/media/i2c/alvium-csi2.h | 488 +++ 7 files changed, 3221 insertions(+) create mode 100644 Documentation/devicetree/bindings/media/i2c/alliedvision,alvium-csi2.yaml create mode 100644 drivers/media/i2c/alvium-csi2.c create mode 100644 drivers/media/i2c/alvium-csi2.h -- 2.34.1
