[PATCH v2 1/6] dt-bindings: display: Add yamls for JH7110 display system

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



StarFive SoCs JH7110 display system:
lcd-controller bases verisilicon dc8200 IP,
and hdmi bases Innosilicon IP. Add bindings for them.

also update MAINTAINERS for dt-bindings

about this patch, I tested the dtbs_check and dt_binding_check
with the result pass.
Based on the feedback of the previous version, the corresponding arrangement is made

Signed-off-by: Keith Zhao <keith.zhao@xxxxxxxxxxxxxxxx>
---
 .../starfive/starfive,display-subsystem.yaml  |  41 +++++++
 .../starfive/starfive,jh7110-dc8200.yaml      | 109 ++++++++++++++++++
 .../starfive/starfive,jh7110-inno-hdmi.yaml   |  85 ++++++++++++++
 MAINTAINERS                                   |   7 ++
 4 files changed, 242 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/starfive/starfive,display-subsystem.yaml
 create mode 100644 Documentation/devicetree/bindings/display/starfive/starfive,jh7110-dc8200.yaml
 create mode 100644 Documentation/devicetree/bindings/display/starfive/starfive,jh7110-inno-hdmi.yaml

diff --git a/Documentation/devicetree/bindings/display/starfive/starfive,display-subsystem.yaml b/Documentation/devicetree/bindings/display/starfive/starfive,display-subsystem.yaml
new file mode 100644
index 000000000..f45b97b08
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/starfive/starfive,display-subsystem.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/starfive/starfive,display-subsystem.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Starfive DRM master device
+
+maintainers:
+  - Keith Zhao <keith.zhao@xxxxxxxxxxxxxxxx>
+  - ShengYang Chen <shengyang.chen@xxxxxxxxxxxxxxxx>
+
+description:
+  The Starfive DRM master device is a virtual device needed to list all
+  display controller or other display interface nodes that comprise the
+  graphics subsystem.
+
+properties:
+  compatible:
+    const: starfive,display-subsystem
+
+  ports:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description:
+      Should contain a list of phandles pointing to display interface ports
+      of display controller devices. Display controller definitions as defined
+      in Documentation/devicetree/bindings/display/starfive/
+      starfive,jh7110-dc8200.yaml
+
+required:
+  - compatible
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    display-subsystem {
+        compatible = "starfive,display-subsystem";
+        ports = <&dc_out>;
+    };
diff --git a/Documentation/devicetree/bindings/display/starfive/starfive,jh7110-dc8200.yaml b/Documentation/devicetree/bindings/display/starfive/starfive,jh7110-dc8200.yaml
new file mode 100644
index 000000000..87051cddf
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/starfive/starfive,jh7110-dc8200.yaml
@@ -0,0 +1,109 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/starfive/starfive,jh7110-dc8200.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: StarFive display controller
+
+description:
+  The StarFive SoC uses the display controller based on Verisilicon IP
+  to transfer the image data from a video memory buffer to an external
+  LCD interface.
+
+maintainers:
+  - Keith Zhao <keith.zhao@xxxxxxxxxxxxxxxx>
+
+properties:
+  compatible:
+    const: starfive,jh7110-dc8200
+
+  reg:
+    minItems: 1
+    items:
+      - description:
+          host interface
+      - description:
+          display physical base address and length.
+
+  interrupts:
+    items:
+      - description: The interrupt will be generated when DC finish one frame
+
+  clocks:
+    items:
+      - description: Clock for display system noc bus.
+      - description: Pixel clock for display channel 0.
+      - description: Pixel clock for display channel 1.
+      - description: Core clock for display controller.
+      - description: Clock for axi bus to access ddr.
+      - description: Clock for ahb bus to R/W the phy regs.
+      - description: External HDMI pixel clock.
+      - description: Parent clock for pixel clock
+
+  clock-names:
+    items:
+      - const: noc_bus
+      - const: channel0
+      - const: channel1
+      - const: dc_core
+      - const: axi_core
+      - const: ahb
+      - const: hdmi_tx
+      - const: dc_parent
+
+  resets:
+    items:
+      - description: Reset for axi bus.
+      - description: Reset for ahb bus.
+      - description: Core reset of display controller.
+
+  reset-names:
+    items:
+      - const: axi
+      - const: ahb
+      - const: core
+
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    dc8200: lcd-controller@29400000 {
+        compatible = "starfive,jh7110-dc8200";
+        reg = <0x29400000 0x100>, <0x29400800 0x2000>;
+        interrupts = <95>;
+        clocks = <&syscrg 60>,
+               <&voutcrg 7>,
+               <&voutcrg 8>,
+               <&voutcrg 4>,
+               <&voutcrg 5>,
+               <&voutcrg 6>,
+               <&hdmitx0_pixelclk>,
+               <&voutcrg 1>;
+        clock-names = "noc_bus", "channel0", "channel1",
+                      "dc_core", "axi_core", "ahb",
+                      "hdmi_tx","dc_parent";
+        resets = <&voutcrg 0>, <&voutcrg 1>, <&voutcrg 2>;
+        reset-names = "axi", "ahb", "core";
+        dc_out: port {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            dc_out_hdmi: endpoint@0 {
+                reg = <0>;
+                remote-endpoint = <&hdmi_in_dc>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/starfive/starfive,jh7110-inno-hdmi.yaml b/Documentation/devicetree/bindings/display/starfive/starfive,jh7110-inno-hdmi.yaml
new file mode 100644
index 000000000..f6c473a10
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/starfive/starfive,jh7110-inno-hdmi.yaml
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/starfive/starfive,jh7110-inno-hdmi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Starfive JH7110 HDMI controller
+
+description:
+  The StarFive JH7110 SoC uses the HDMI signal transmiter based on innosilicon IP
+  to generate HDMI signal from its input and transmit the signal to the screen.
+
+maintainers:
+  - Keith Zhao <keith.zhao@xxxxxxxxxxxxxxxx>
+
+properties:
+  compatible:
+    const: "starfive,jh7110-inno-hdmi"
+
+  reg:
+    minItems: 1
+
+  interrupts:
+    items:
+      - description: The HDMI hot plug detection interrupt.
+
+  clocks:
+    items:
+      - description: System clock of HDMI module.
+      - description: Mclk clock of HDMI audio.
+      - description: Bclk clock of HDMI audio.
+      - description: Pixel clock generated by HDMI module.
+
+  clock-names:
+    items:
+      - const: sysclk
+      - const: mclk
+      - const: bclk
+      - const: pclk
+
+  resets:
+    maxItems: 1
+
+  '#sound-dai-cells':
+    const: 0
+
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+    description:
+      Should contain a remote endpoint phandle of display controller device.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+  - '#sound-dai-cells'
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    hdmi: hdmi@29590000 {
+        compatible = "starfive,jh7110-inno-hdmi";
+        reg = <0x29590000 0x4000>;
+        interrupts = <99>;
+        clocks = <&voutcrg 17>,
+               <&voutcrg 15>,
+               <&voutcrg 16>,
+               <&hdmitx0_pixelclk>;
+        clock-names = "sysclk", "mclk","bclk","pclk";
+        resets = <&voutcrg 9>;
+        #sound-dai-cells = <0>;
+        hdmi_in: port {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            hdmi_in_dc: endpoint@0 {
+                reg = <0>;
+                remote-endpoint = <&dc_out_hdmi>;
+            };
+        };
+    };
diff --git a/MAINTAINERS b/MAINTAINERS
index 3be1bdfe8..46e51bca5 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -6751,6 +6751,13 @@ T:	git git://anongit.freedesktop.org/drm/drm-misc
 F:	Documentation/devicetree/bindings/display/panel/tpo,tpg110.yaml
 F:	drivers/gpu/drm/panel/panel-tpo-tpg110.c
 
+DRM DRIVERS FOR STARFIVE
+M:	Keith Zhao <keith.zhao@xxxxxxxxxxxxxxxx>
+L:	dri-devel@xxxxxxxxxxxxxxxxxxxxx
+S:	Maintained
+T:	git git://anongit.freedesktop.org/drm/drm-misc
+F:	Documentation/devicetree/bindings/display/starfive/
+
 DRM DRIVER FOR USB DISPLAYLINK VIDEO ADAPTERS
 M:	Dave Airlie <airlied@xxxxxxxxxx>
 R:	Sean Paul <sean@xxxxxxxxxx>
-- 
2.34.1




[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux